RESUMO
The microstructure of Cu(80)Fe(10)Ni(10) (at%) granular ribbon was investigated by means of atom probe tomography (APT). A granular system is composed of magnetic precipitates embedded in a non-magnetic matrix. In this ribbon, the magnetic precipitates have a diameter smaller than 5nm in the as-spun state, and their crystallographic structure is very similar to the one of the matrix, which makes it difficult to characterize them using conventional techniques. Those data are of great importance to understand the magnetic and the transport behaviour of these ribbons. Using atom probe tomography, a 3D reconstruction of the microstructure of the as-spun and annealed ribbons was achieved and a precise characterization of the compositions of the two phases and of the composition profile at interfaces was carried out. In the as-spun state the composition of the matrix is Cu(89)Fe(3)Ni(8), the one of the precipitates is Cu(30)Fe(40)Ni(30). Upon annealing, the precipitates get enriched in iron. After annealing at 600 degrees C for 24h, the measured compositions are close to the one predicted by Thermocalc, with Cu(94)Fe(1)Ni(5) for the matrix and Cu(5)Fe(64)Ni(31) for the precipitates.
RESUMO
The structural and magnetic properties of the evaporated Fe/V multilayers with a fixed V-layer thickness (tV = 1.5 nm) and variable Fe layer thicknesses (0.75 nm < or = tFe < or = 6 nm) have been studied by X-ray reflectivity and high-angle X-ray diffraction, conversion-electron Mössbauer spectrometry, and vibrating sample magnetometry. The results show that multilayers are formed with a broad Fe/V interface and pure crystalline bcc-Fe layers in the center of the individual subsystems. The Fe spin orientation is aligned in the film plane in the individual centers as well in the interfacial regions. The interfacial anisotropy constant Ks was estimated to be equal to 0.04 mJ/m2. This parallel magnetic anisotropy is discussed in terms of reduced symmetry effects on the hybridized 3d states.
