Efficacy and Safety of Different Trapezium Implants for Trapeziometacarpal Joint Osteoarthritis: A Systematic Review and Meta-Analysis.

Background: The trapeziometacarpal joint (TMCJ) is the most common hand joint affected by osteoarthritis (OA), and trapezium implant arthroplasty is a potential treatment for recalcitrant OA. This meta-analysis aimed to investigate the efficacy and safety of various trapezium implants as an interventional option for TMCJ OA. Methods: Web of Science, PubMed, Scopus, Google Scholar, and Cochrane library databases were searched for relevant studies up to May 28, 2022. Preferred Reported Items for Systematic Review and Meta-Analysis guidelines were adhered to, and the protocol was registered in PROSPERO. The methodological quality was assessed by National Heart, Lung, and Blood Institute tools for observational studies and the Cochrane risk of bias tool. Subgroup analyses were performed on different replacement implants; the analysis was done using Open Meta-Analyst software and P values <.05 were considered statistically significant. Results: A total of 123 studies comprising 5752 patients were included. Total joint replacement (TJR) implants demonstrate greater significant improvements in visual analogue scale pain scores postoperatively. Interposition with partial trapezial resection implants were associated with highest grip strength and highest reduction in the Disabilities of the Arm, Shoulder, and Hand (DASH) score. Revision rates were highest in TJR (12.3%) and lowest in interposition with partial trapezial resection (6.2%). Conclusion: Total joint replacement and interposition with partial trapezial resection implants improve pain score, grip strength, and DASH scores more than other implant options. Future studies should focus on high-quality randomized clinical trials comparing different implants to accumulate higher quality evidence and more reliable conclusions.

Thermoregulation, Not Just Camouflage: The Unique Vasculature of Giraffe Patches. A Cadaver Study with Clinical Implications.

BACKGROUND: Serendipitously, a dead giraffe provided opportunity to study its vascular anatomy. Comparative animal studies have revealed important information for designing new flaps and new microsurgical techniques. So, do giraffe's patches support a thermal window concept, do animals with similar markings and habitat have a similar thermoregulatory role, and could results offer new insight into human thermoregulation and free tissue transfer? METHODS: Previously described lead-oxide arterial-only injection studies, of a single giraffe, zebra, Africa wild dog, and spotted jaguar, all with wire-encircled pigmented patches; and archival human, pig, dog, cat, and rabbit studies, were compared. RESULTS: Each giraffe patch was supplied by just a single artery (angiosome) averaging 0.9 mm diameter, that divided near its center and sent dense, long, parallel, radiating spoke-wheel branches averaging 0.62 mm diameter to the patch margin, continuing as reduced-caliber choke anastomoses averaging 0.8 mm to link adjacent patch angiosomes. Uniquely arranged large veins, with an average of 1.66 mm, encircled the patches in the pale skin paralleled by arteriae comitantes averaging 0.22 mm. These arteries, connected to patch angiosomes, filled the veins intermittently by means of arteriovenous (A-V) shunts averaging 0.12 mm in diameter of magnitude never seen before in any species studied. None of the other three animals had angiosome territories matching their pigmented fur, or significant A-V filling. CONCLUSIONS: This study supports the "thermostatic" concept of the giraffe skin patches, with A-V shunts playing a major role. It affirms the need for further studies of these shunts in human thermoregulation and other flow regulations in physiology, pathology, and free tissue transfer.

A novel model for hands-on laparoscopic pelvic surgery training on Genelyn-embalmed body: an initial feasibility study.

The human donor body provides a well-accepted ex vivo model for laparoscopic surgical training. Unembalmed, or fresh-frozen, bodies comprise high-fidelity models. However, their short life span and high cost relatively limit the hands-on training benefits. In contrast, soft embalmed body of donors has a relatively longer usability without compromising tissue flexibility. This study reports the initial experience of the utility and feasibility of human donor Genelyn-embalmed body as a novel soft-embalmed cadaveric model for laparoscopic surgical training. An expert laparoscopic surgeon, who organised many fresh-frozen body donor courses, performed deep laparoscopic pelvic dissection and laparoscopic surgical tasks including suturing and electrosurgery on a single Genelyn-embalmed body. The three sessions were performed over a course of 3 weeks. The body was fully embalmed using the Genelyn technique. The technique consisted of a single-point closed arterial perfusion of embalming solution via the carotid artery with no further exposure to or immersion in embalming fluids thereafter. The donor's Genelyn-embalmed body provided a feasible model for laparoscopic surgical training. Initial experience shows evidence of this model being feasible and realistic. There was reproducibility of these qualities across a minimum of 3 weeks in this single-donor study. Initial experience shows that donor's Genelyn-embalmed body provides a novel model for laparoscopic surgical training, which possesses fidelity and is feasible for laparoscopic training. While further studies are needed to validate these findings, this technical note provides perspectives from an expert trainer regarding this model and provides a photographic and videographic atlas of this model's use in laparoscopy.

Forced Disruption of Anatomy Education in Australia and New Zealand: An Acute Response to the Covid-19 Pandemic.

Australian and New Zealand universities commenced a new academic year in February/March 2020 largely with "business as usual." The subsequent Covid-19 pandemic imposed unexpected disruptions to anatomical educational practice. Rapid change occurred due to government-imposed physical distancing regulations from March 2020 that increasingly restricted anatomy laboratory teaching practices. Anatomy educators in both these countries were mobilized to adjust their teaching approaches. This study on anatomy education disruption at pandemic onset within Australia and New Zealand adopts a social constructivist lens. The research question was "What are the perceived disruptions and changes made to anatomy education in Australia and New Zealand during the initial period of the Covid-19 pandemic, as reflected on by anatomy educators?." Thematic analysis to elucidate "the what and why" of anatomy education was applied to these reflections. About 18 anatomy academics from ten institutions participated in this exercise. The analysis revealed loss of integrated "hands-on" experiences, and impacts on workload, traditional roles, students, pedagogy, and anatomists' personal educational philosophies. The key opportunities recognized for anatomy education included: enabling synchronous teaching across remote sites, expanding offerings into the remote learning space, and embracing new pedagogies. In managing anatomy education's transition in response to the pandemic, six critical elements were identified: community care, clear communications, clarified expectations, constructive alignment, community of practice, ability to compromise, and adapt and continuity planning. There is no doubt that anatomy education has stepped into a yet unknown future in the island countries of Australia and New Zealand.

Challenges in creating dissectible anatomical 3D prints for surgical teaching.

Three-dimensional (3D) printing, or additive manufacturing, is now a widely used tool in pre-operative planning, surgical teaching and simulator training. However, 3D printing technology that produces models with accurate haptic feedback, biomechanics and visuals for the training surgeon is not currently available. Challenges and opportunities in creating such surgical models will be discussed in this review paper. Surgery requires proper tissue handling as well as knowledge of relevant anatomy. To prepare doctors properly, training models need to take into account the biomechanical properties of the anatomical structures that will be manipulated in any given operation. This review summarises and evaluates the current biomechanical literature as it relates to human tissues and correlates the impact of this knowledge on developing high fidelity 3D printed surgical training models. We conclude that, currently, a printer technology has not yet been developed which can replicate many of the critical qualities of human tissue. Advances in 3D printing technology will be required to allow the printing of multi-material products to achieve the mechanical properties required.

Neurovasculature of high and low tie ligation of the inferior mesenteric artery.

PURPOSE: Controversy exists as to whether a high or low tie ligation of the inferior mesenteric artery (IMA) is the preferred technique in surgeries of the left colon and rectum. This study aims to contribute to the discussion as to which is the more beneficial technique by investigating the neurovasculature at each site. METHODS: Ten embalmed cadaveric donors underwent division of the inferior mesenteric artery at the level of the low tie. The artery was subsequently ligated at the root to render a section of tissue for histological analysis of the proximal (high tie), mid and distal (low tie) segments. RESULTS: Ganglia observed in the proximal end of seven specimens in the sample imply that there would be disruption to the innervation in a high tie procedure. CONCLUSION: This study suggests that a high tie should be avoided if the low tie is oncologically viable.

Get SET: aligning anatomy demonstrator programmes with Surgical Education and Training selection criteria.

BACKGROUND: Prevocational doctors aspiring to surgical careers are commonly recruited as anatomy demonstrators for undergraduate and graduate medical programmes. Entry into Surgical Education and Training (SET) is highly competitive and a unique opportunity exists to align anatomy demonstrator programmes with the selection criteria and core competencies of SET programmes. This study used a qualitative approach to (i) determine what criteria applicants for SET are assessed on and (ii) identify criteria that could be aligned with and enhanced by an anatomy demonstrator programme. METHODS: The selection guidelines of all nine surgical specialties for the 2017 intake of SET trainees were analysed using qualitative content analysis methodology. RESULTS: The Royal Australasian College of Surgeons adopted a holistic approach to trainee selection that assessed both discipline-specific and discipline-independent skills. Qualitative content analysis identified eight categories of key selection criteria: medical expertise, scholarly activity, professional identity, interpersonal skills, integrity, self-management, insight and self-awareness and community involvement. The structured curriculum vitae was heavily weighted towards discipline-specific skills, such as medical expertise and scholarly activity. Insufficient information was available to determine the weighting of selection criteria assessed by the structured referee reports or interviews. CONCLUSION: Anatomy demonstrator programmes provide prevocational doctors with unique opportunities to develop surgical skills and competencies in a non-clinical setting. Constructively aligned anatomy demonstrator programmes may be particularly beneficial for prevocational doctors seeking to improve their anatomical knowledge, teaching skills or scholarly activity.

Dissecting the role of sessional anatomy teachers: A systematic literature review.

Worldwide there is a growing reliance on sessional teachers in universities. This has impacted all disciplines in higher education including medical anatomy programs. The objective of this review was to define the role and support needs of sessional anatomy teachers by reporting on the (1) qualifications, (2) teaching role, (3) training, and (4) performance management of this group of educators. A systematic literature search was conducted on the 27 July 2017 in Scopus, Web of Science, and several databases on the Ovid, ProQuest and EBSCOhost platforms. The search retrieved 5,658 articles, with 39 deemed eligible for inclusion. The qualifications and educational distance between sessional anatomy teachers and their students varied widely. Reports of cross-level, near-peer and reciprocal-peer teaching were identified, with most institutes utilizing recent medical graduates or medical students as sessional teachers. Sessional anatomy teachers were engaged in the full spectrum of teaching-related duties from assisting students with cadaveric dissection, to marking student assessments and developing course materials. Fourteen institutes reported that training was provided to sessional anatomy teachers, but the specific content, objectives, methods and effectiveness of the training programs were rarely defined. Evaluations of sessional anatomy teacher performance primarily relied on subjective feedback measures such as student surveys (n = 18) or teacher self-assessment (n = 3). The results of this systematic review highlight the need for rigorous explorations of the use of sessional anatomy teachers in medical education, and the development of evidence-based policies and training programs that regulate and support the use of sessional teachers in higher education. Anat Sci Educ 11: 410-426. © 2017 American Association of Anatomists.

Lateral Intercondylar Ridge: Is it a reliable landmark for femoral ACL insertion?: An anatomical study.

BACKGROUND: Incorrect femoral tunnel placement is the most common cause of graft failure during Anterior Cruciate Ligament (ACL) Reconstruction. A reliable landmark can minimize errors. AIM: To identify whether the Lateral Intercondylar Ridge (LIR) is a consistent anatomical structure and define its relationship with the femoral ACL insertion. MATERIALS AND METHODS: Phase 1: we studied 23 femoral dry bone specimens macroscopically. Using a digital microscribe, the medial surface of the lateral femoral condyle was reconstructed (3D) to evaluate whether there was an identifiable bony ridge. Phase 2: 7 cadaveric specimens with intact soft tissues were dissected to identify the femoral ACL insertion. A 3D reconstruction of the femoral ACL insertion and the surface allowed us to define the relationship between the LIR and the ACL insertion. RESULTS: All specimens had a defined LIR on the medial surface of the lateral femoral condyle. The ridge was consistently located just anterior to the femoral ACL insertion. The ACL footprint was present in the depression between the ridge and the Inferior Articular Cartilage Margin (IACM). The mean distance from the midpoint of the IACM to the LIR was 10.1 mm. CONCLUSIONS: This is the first study to use the microscribe to digitally reconstruct the medial surface of the lateral femoral condyle. It shows that the LIR is a consistent anatomical structure that defines the anterior margin of the femoral ACL insertion, which guides femoral tunnel placement. Our findings support the ruler technique, which is a commonly used method for anatomic single bundle ACL reconstruction.

Extending the use of the gracilis muscle flap in perineal reconstruction surgery.

Reconstruction of the perineum is required following oncological resections. Plastic surgical techniques can be used to restore the aesthetics and function of the perineum. The gracilis myocutaneous flap provides a substantial skin paddle, with minimal donor site morbidity. The flap is pedicled on a perforator from the medial circumflex femoral artery, giving it limited reach across the perineum. Tunnelling the flap under the adductor longus muscle may free up more of the arterial pedicle, increasing its reach. On three female cadavers, bilateral gracilis flaps were raised in the standard surgical manner, giving six flaps in total. With the flaps pedicled across the perineum, the distance from the tip of each flap was measured to the anterior superior iliac spine (ASIS). The flaps were then tunnelled under the adductor longus muscle. The distances to the ASIS were measured again. The average pedicle length was greater than 7 cm. Tunnelling the flap under the adductor longus muscle increased the reach by more than 4 cm on average. Cadaveric dissection has shown that tunnelling of the flap in a novel way increase its reach across the perineum. This additional flexibility improves its use clinically and is of benefit to plastic surgeons operating in perineal reconstruction.

Tensile properties of the transverse carpal ligament and carpal tunnel complex.

BACKGROUND: A new sophisticated method that uses video analysis techniques together with a Maillon Rapide Delta to determine the tensile properties of the transverse carpal ligament-carpal tunnel complex has been developed. METHODS: Six embalmed cadaveric specimens amputated at the mid-forearm and aged (mean (SD)): 82 (6.29) years were tested. The six hands were from three males (four hands) and one female (two hands). Using trigonometry and geometry the elongation and strain of the transverse carpal ligament and carpal arch were calculated. The cross-sectional area of the transverse carpal ligament was determined. Tensile properties of the transverse carpal ligament-carpal tunnel complex and Load-Displacement data were also obtained. Descriptive statistics, one-way ANOVA together with a post-hoc analysis (Tukey) and t-tests were incorporated. FINDINGS: A transverse carpal ligament-carpal tunnel complex novel testing method has been developed. The results suggest that there were no significant differences between the original transverse carpal ligament width and transverse carpal ligament at peak elongation (P=0.108). There were significant differences between the original carpal arch width and carpal arch width at peak elongation (P=0.002). The transverse carpal ligament failed either at the mid-substance or at their bony attachments. At maximum deformation the peak load and maximum transverse carpal ligament displacements ranged from 285.74N to 1369.66N and 7.09mm to 18.55mm respectively. The transverse carpal ligament cross-sectional area mean (SD) was 27.21 (3.41)mm(2). INTERPRETATION: Using this method the results provide useful biomechanical information and data about the tensile properties of the transverse carpal ligament-carpal tunnel complex.

The metatarsosesamoid joint: an in vitro 3D quantitative assessment.

BACKGROUND: The anatomy of the first metatarsophalangeal (MTP) joint, particularly the metatarsosesamoid articulation, remains poorly understood. Our goal was to quantitatively define the excursion of the sesamoids. METHODS: Seven cadavers were dissected to assess the articulating surfaces throughout a normal range of motion. The dissections were digitally reconstructed in various positions using a MicroScribe. RESULT: For first MTP joint, excursion averaged 14.7mm for the tibial sesamoid in the sagittal plane and 7.5mm for the fibular sesamoid. The sesamoids also moved medially to laterally when the joint was dorsiflexed. For the maximally dorsiflexed joint, excursion averaged 2.8mm for the tibial sesamoid and 3.5mm for the fibular sesamoid. CONCLUSION: Hallucal sesamoids appear to have differential tracking: the tibial sesamoid has greater longitudinal excursion; the fibular sesamoid has greater lateral excursion. The anatomical data will interest those involved with the design of an effective hallux arthroplasty.

Quantitative measurement of lower limb mechanical alignment and coronal knee laxity in early flexion.

BACKGROUND: Non-invasive quantification of lower limb alignment using navigation technology is now possible throughout knee flexion owing to software developments. We report the precision and accuracy of a non-invasive system measuring mechanical alignment of the lower limb including coronal stress testing of the knee. METHODS: Twelve cadaveric limbs were tested with a commercial invasive navigation system against the non-invasive system. Coronal mechanical femorotibial (MFT) alignment was measured with no stress, then 15 Nm varus and valgus applied moments. Measurements were recorded at 10° intervals from extension to 90° flexion. At each flexion interval, coefficient of repeatability (CR) tested precision within each system, and limits of agreement (LOA) tested agreement between the two systems. Limits for CR & LOA were set at 3° based on requirements for surgical planning and evaluation. RESULTS: Precision was acceptable throughout flexion in all conditions of stress using the invasive system (CR ≤ 1.9°). Precision was acceptable using the non-invasive system from extension to 50° flexion (CR ≤ 2.4°), beyond which precision was unacceptable (> 3.4°). With no coronal stress applied, agreement remained acceptable from extension to 40° (LOA ≤ 2.4°), and when 15 Nm varus or valgus stress was applied agreement was acceptable from extension to 30° (LOA ≤ 2.9°). Higher angles of knee flexion had a negative impact on precision and accuracy. CONCLUSION & CLINICAL RELEVANCE: The non-invasive system provides reliable quantitative data in-vitro on coronal MFT alignment and laxity in the range relevant to assessment of collateral ligament injury, pre-operative planning of arthroplasty and flexion instability following arthroplasty. In-vivo validation should be performed.

An anatomical study comparing two surgical approaches for isolated talonavicular arthrodesis.

BACKGROUND: Two operative approaches are commonly used for isolated talonavicular arthrodesis: the medial and the dorsal approach. It is recognized that access to the lateral aspect of the talonavicular joint can be limited when using the medial approach, and it is our experience that using the dorsal approach addresses this issue. We performed an anatomical study using cadaver specimens, to compare the amount of articular surface that can be accessed by each operative approach. METHODS: Medial and dorsal approaches to the talonavicular joint were performed on each of 11 cadaveric specimens (10 fresh frozen, 1 embalmed). Distraction of the joint was performed as used intraoperatively and the accessible area of articular surfaces was marked for each of the 2 approaches using a previously reported technique. Disarticulation was performed and the marked surface area was quantified using an immersion digital microscribe, allowing a 3-dimensional virtual model of the articular surfaces to be assessed. RESULTS: The median percentage of total accessible talonavicular articular surface area for the medial and dorsal approaches was 71% and 92%, respectively (Wilcoxon signed-rank test, P < .001). CONCLUSION: This study provides quantifiable measurements of the articular surface accessible by the medial and dorsal approaches to the talonavicular joint. CLINICAL RELEVANCE: These data support for the use of the dorsal approach for talonavicular arthrodesis, particularly in cases where access to the lateral half of the joint is necessary.

Non-invasive quantification of lower limb mechanical alignment in flexion.

OBJECTIVE: Non-invasive navigation techniques have recently been developed to determine mechanical femorotibial alignment (MFTA) in extension. The primary aim of this study was to evaluate the precision and accuracy of an image-free navigation system with new software designed to provide multiple kinematic measurements of the knee. The secondary aim was to test two types of strap material used to attach optical trackers to the lower limb. METHODS: Seventy-two registrations were carried out on 6 intact embalmed cadaveric specimens (mean age: 77.8 ± 12 years). A validated fabric strap, bone screws and novel rubber strap were used to secure the passive tracker baseplate for four full experiments with each knee. The MFTA angle was measured under the conditions of no applied stress, valgus stress, and varus stress. These measurements were carried out at full extension and at 30°, 40°, 50° and 60° of flexion. Intraclass correlation coefficients, repeatability coefficients, and limits of agreement (LOA) were used to convey precision and agreement in measuring MFTA with respect to each of the independent variables, i.e., degree of flexion, applied coronal stress, and method of tracker fixation. Based on the current literature, a repeatability coefficient and LOA of ≤ 3° were deemed acceptable. RESULTS: The mean fixed flexion for the 6 specimens was 12.8° (range: 6-20°). The mean repeatability coefficient measuring MFTA in extension with screws or fabric strapping of the baseplate was ≤ 2°, compared to 2.3° using rubber strapping. When flexing the knee, MFTA measurements taken using screws or fabric straps remained precise (repeatability coefficient ≤ 3°) throughout the tested range of flexion (12.8-60°); however, using rubber straps, the repeatability coefficient was >3° beyond 50° flexion. In general, applying a varus/valgus stress while measuring MFTA decreased precision beyond 40° flexion. Using fabric strapping, excellent repeatability (coefficient ≤ 2°) was observed until 40° flexion; however, beyond 50° flexion, the repeatability coefficient was >3°. As was the case with precision, agreement between the invasive and non-invasive systems was satisfactory in extension and worsened with flexion. Mean limits of agreement between the invasive and non-invasive system using fabric strapping to assess MFTA were 3° (range: 2.3-3.8°) with no stress applied and 3.9° (range: 2.8-5.2°) with varus and valgus stress. Using rubber strapping, the corresponding values were 4.4° (range: 2.8-8.5°) with no stress applied, 5.5° (range: 3.3-9.0°) with varus stress, and 5.6° (range: 3.3-11.9°) with valgus stress. DISCUSSION: Acceptable precision and accuracy may be possible when measuring knee kinematics in early flexion using a non-invasive system; however, we do not believe passive trackers should be mounted with rubber strapping such as was used in this study. Flexing the knee appears to decrease the precision and accuracy of the system. The functions of this new software using image-free navigation technology have many potential clinical applications, including assessment of bony and soft tissue deformity, pre-operative planning, and post-operative evaluation, as well as in further pure research comparing kinematics of the normal and pathological knee.

Segmental masseteric flap for dynamic reanimation of facial palsy.

The masseter muscle is one of the major chewing muscles and contributes to define facial contour. It is an important landmark for aesthetic and functional surgery and has been used for facial palsy reanimation or as source of donor motor nerve. We present an anatomic study to evaluate the possibility of using a muscle subunit for dynamic eye reanimation. Sixteen head halves were dissected under magnification to study the neurovascular distribution and determine safe muscle subunits; areas of safe/dangerous dissection were investigated. Once isolated, the arc of rotation of the muscular subunit was measured on fresh body to verify the reach to the lateral canthus. The patterns of neurovascular distribution and areas of safe dissection were identified; the anterior third of the muscle represents an ideal subunit with constant nerve and artery distribution. The muscle is too short to reach the lateral canthus; a fascia graft extension is needed. The information provided identified the main neurovascular branches and confirms the feasibility of a dynamic segmental flap. The need of efficient motor units for facial reanimation demands for different surgical options. A detailed anatomic description of the neurovascular bundle is mandatory to safely raise a functional motor subunit.

Quantitative assessment of the subchondral vascularity of the talar dome: a cadaveric study.

BACKGROUND: The arterial supply to the talus has been extensively studied previously but never to specifically examine the subchondral region of the talar dome, a frequent site of localised pathology. This study aims to analyse and quantify the subchondral vascularity of the talar dome. METHODS: We performed cadaveric arterial injection studies. After processing, the vascularity to the subchondral region of the talar dome was visualised and mapped using three-dimensional computer technology, then quantified and reported using a nine-section anatomical grid. RESULTS: The areas of relative poor perfusion across the talar dome are the posterior/medial, posterior/lateral and middle/medial sections of a nine-section grid. The rest of the subchondral region shows more richly vascularised bone. CONCLUSIONS: The vascularity of the subchondral surface of the talar dome is not uniformly distributed. This may be relevant to the aetiology and management of osteochondral lesions and shows some correlation with their more frequent locations.

Repeatability and accuracy of a non-invasive method of measuring internal and external rotation of the tibia.

PURPOSE: The ability to quantify rotational laxity of the knee would increase understanding of functional rotatory instability, identify the best treatment methods for soft tissue injury, and have a role in diagnosis of soft tissue injury. This study aimed to report the reliability, repeatability and precision of a non-invasive adaptation of image-free navigation technology by comparing with a validated invasive system used for computer-assisted surgery. METHODS: Twelve cadaveric lower limbs were tested with a commercial image-free navigation system using passive trackers secured by bone screws. They were then tested a non-invasive fabric-strap system. Manual application of torque was used consistent with clinical examination to rotate the tibia to the end of internal rotation and external rotation range. Measurements were taken at 10° intervals from full extension to 90° flexion, and protocol was repeated twice using each system. Intraclass correlation coefficient (ICC) was used to reflect reliability of measurements. At each flexion interval, coefficient of repeatability (CR) was calculated for each system, and limits of agreement (LOA) were used to reflect agreement between the systems. RESULTS: The results for internal and external rotation were combined throughout flexion: ICC invasive; 0.94 (0.86-0.99), non-invasive; 0.92 (0.7-0.99), CR invasive; 2.4° (1.3-4.8°), non-invasive; 3.5° (1.8-6.6), LOA; 8.2° (4.3-13.5). CONCLUSION: Non-invasive optical tracker fixation gives improved agreement with a validated method of measurement compared with devices measuring tibial rotation by foot position. This system gives the added possibility of dynamic, weight-bearing testing in the clinically important range of 0°-30° knee flexion without the need for any limb restraint.