Chemical and Electrochemical Characterization of Hot-Pressed Li6PS5Cl Solid State Electrolyte: Operating Pressure-Invariant High Ionic Conductivity.

Sulfide solid state electrolytes (SSE) are among the most promising materials in the effort to replace liquid electrolytes, largely due to their comparable ionic conductivities. Among the sulfide SSEs, Argyrodites (Li6PS5X, X=Cl, Br, I) further stand out due to their high theoretical ionic conductivity (~1×10-2 S cm-1) and interfacial stability against reactive metal anodes such as lithium. Generally, solid state electrolyte pellets are pressed from powder feedstock at room temperature, however, pellets fabricated by cold pressing consistently result in low bulk density and high porosity, facilitating interfacial degradation reactions and allowing dendrites to propagate through the pores and grain boundaries. Here, we demonstrate the mechanical and electrochemical implications of hot-pressing standalone LPSCl SSE pellets with near-theoretical ionic conductivity, superior cycling performance, and enhanced mechanical stability. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and x-ray diffraction spectroscopy (XRD) analysis reveal no chemical changes to the Argyrodite surface after hot pressing up to 250 °C. Moreover, we use electrochemical impedance spectroscopy (EIS) to understand mechanical stability of Argyrodite SSE pellets as a function of externally applied pressure, demonstrating for the first time pressed standalone Argyrodite pellets with near-theoretical conductivities at external pressures below 14 MPa.

Nanoscale Li, Na, and K ion-conducting polyphosphazenes by atomic layer deposition.

A key trailblazer in the development of thin-film solid-state electrolytes has been lithium phosphorous oxynitride (LiPON), the success of which has led to recent progress in thin-film ion conductors. Here we compare the structural, electrochemical, and processing parameters between previously published LiPON and NaPON ALD processes with a novel ALD process for the K analogue potassium phosphorous oxynitride (KPON). In each ALD process, alkali tert-butoxides and diethylphosphoramidate are used as precursors. To understand the ALD surface reactions, this work proposes a reaction mechanism determined by in-operando mass spectrometry for the LiPON process as key to understanding the characteristics of the APON (A = Li, Na, K) family. As expected, NaPON and LiPON share similar reaction mechanisms as their structures are strikingly similar. KPON, however, exhibits similar ALD process parameters but the resulting film composition is quite different, showing little nitrogen incorporation and more closely resembling a phosphate glass. Due to the profound difference in structure, KPON likely undergoes an entirely different reaction mechanism. This paper presents a comprehensive summary of ALD ion conducting APON films as well as a perspective that highlights the versatility of ALD chemistries as a tool for the development of novel thin film ion-conductors.

Nanoparticle-based photothermal heating to drive chemical reactions within a solid: using inhomogeneous polymer degradation to manipulate mechanical properties and segregate carbonaceous by-products.

Photothermal heating via metal nanoparticles is utilized to degrade polyethylcyanoacrylate (PECA), which undergoes a thermally-driven depolymerization process, resulting in (i) monomer loss from the sample, (ii) repolymerization to form shorter chains (oligomer), and (iii) formation of carbonaceous by-products which are graphene-like and luminescent. These unique PECA properties are used to demonstrate the heterogeneous temperature distribution present during photothermal processing and the results are compared to degradation via conventional methods where a uniform temperature is present. Photothermal heating results in formation of pockets of depolymerized material around each nanoscale heating site. The characteristic size of these photothermally-generated mechanical defects is determined from changes in the material's tensile strength. Changes in mass loss and molecular weight are utilized to determine the fraction of the sample that has depolymerized: distributing this volume equally to each heating site (based on the nanoparticle concentration) results in a volume that matches the defect size from independent mechanical measurements. In this way, macroscopic measurements elucidate the mesoscopic pattern of photothermal degradation. Sample morphology on scales from millimeters to nanometers is assessed via optical and electron microscopy. The carbonaceous by-products of degradation form in the hot region around each nanoparticle during photothermal heating, as revealed by transmission electron microscopy studies. Heterogeneous heating is also evident from optical images where starch granules, employed as an inert dilute additive to enhance PECA mechanical properties, also become luminescent due to degradation in "hot spots" created by the overlap of warm regions from nearby nanoparticle sites. Beyond the fundamental knowledge gained by these studies, the results demonstrate the ability to manipulate the connection between mechanical properties and chemical degradation which is important for developing new strategies for management of polymeric waste.

Enhancing radical molecular beams by skimmer cooling.

A high-intensity supersonic beam source has been a key component in studies of molecular collisions, molecule-surface interaction, chemical reactions, and precision spectroscopy. However, the molecular density available for experiments in a downstream science chamber is limited by skimmer clogging, which constrains the separation between a valve and a skimmer to at least several hundred nozzle diameters. A recent experiment (Sci. Adv., 2017, 3, e1602258) has introduced a new strategy to address this challenge: when a skimmer is cooled to a temperature below the freezing point of the carrier gas, skimmer clogging can be effectively suppressed. We go beyond this proof-of-principle work in several key ways. Firstly, we apply the skimmer cooling approach to discharge-produced radical and metastable beams entrained in a carrier gas. We also identify two different processes for skimmer clogging mitigation-shockwave suppression at temperatures around the carrier gas freezing point and diffusive clogging at even lower temperatures. With the carrier clogging removed, we now fully optimize the production of entrained species such as hydroxyl radicals, resulting in a gain of 30 in density over the best commercial devices. The gain arises from both clogging mitigation and favorable geometry with a much shorter valve-skimmer distance.