Polyhydroxyalkanoates from a Mixed Microbial Culture: Extraction Optimization and Polymer Characterization.

Polyhydroxyalkanoates (PHA) are biopolymers with potential to replace conventional oil-based plastics. However, PHA high production costs limit their scope of commercial applications. Downstream processing is currently the major cost factor for PHA production but one of the least investigated aspects of the PHA production chain. In this study, the extraction of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced at pilot scale by a mixed microbial culture was performed using sodium hydroxide (NaOH) or sodium hypochlorite (NaClO) as digestion agents of non-PHA cellular mass. Optimal conditions for digestion with NaOH (0.3 M, 4.8 h) and NaClO (9.0%, 3.4 h) resulted in polymers with a PHA purity and recovery of ca. 100%, in the case of the former and ca. 99% and 90%, respectively, in the case of the latter. These methods presented higher PHA recoveries than extraction by soxhlet with chloroform, the benchmark protocol for PHA extraction. The polymers extracted by the three methods presented similar PHA purities, molecular weights and polydispersity indices. Using the optimized conditions for NaOH and NaClO digestions, this study analyzed the effect of the initial intracellular PHA content (40-70%), biomass concentration (20-100 g/L) and biomass pre-treatment (fresh vs. dried vs. lyophilized) on the performance of PHA extraction by these two methods.

Oerskovia paurometabola can efficiently decolorize azo dye Acid Red 14 and remove its recalcitrant metabolite.

The biodegradation of dyes remains one of the biggest challenges of textile wastewater. Azo dyes are one of the most commonly employed dye classes, and biological treatment processes tend to generate recalcitrant aromatic amines, which are more toxic than the parent dye molecule. This study aimed to isolate bacterial strains with the capacity to degrade both the azo dye and the resulting aromatic amines towards the development of a simple and reliable treatment approach for dye-laden wastewaters. A mixed bacterial enrichment was first developed in an anaerobic-aerobic lab-scale sequencing batch reactor (SBR) fed with a synthetic textile wastewater containing the model textile azo dye Acid Red 14 (AR14). Eighteen bacterial strains were isolated from the SBR, including members of the Acinetobacter, Pseudomonas and Oerskovia genera, Oerskovia paurometabola presenting the highest decolorization capacity (91% after 24 h in static anaerobic culture). Growth assays supported that this is a facultative bacterium, and decolorization batch tests with 20-100 mg AR14 L-1 in a synthetic textile wastewater supplemented with yeast extract indicated that O. paurometabola has a high color removal capacity for a significant range of AR14 concentrations. In addition, a model typically used to describe biodegradation of xenobiotic compounds was adjusted to the results, to predict AR14 biodegradation time profiles at different initial concentrations. HPLC analysis confirmed that decolorization occurred through azo bond reduction under anaerobic conditions, the azo dye being completely reduced after 24 h of anaerobic incubation for the range of concentrations tested. Interestingly, partial (up to 63%) removal of one of the resulting aromatic amines (4-amino-naphthalene-1-sulfonic acid) was observed when subsequently subjected to aerobic conditions. Overall, this work showed the azo dye biodegradation potential of specific bacterial strains isolated from mixed culture bioreactors, reporting for the first time the decolorization capacity of an Oerskovia sp. with further biodegradation of a recalcitrant sulfonated aromatic amine metabolite.