Nanofluids for heat transfer: an engineering approach.

An overview of systematic studies that address the complexity of nanofluid systems and advance the understanding of nanoscale contributions to viscosity, thermal conductivity, and cooling efficiency of nanofluids is presented. A nanoparticle suspension is considered as a three-phase system including the solid phase (nanoparticles), the liquid phase (fluid media), and the interfacial phase, which contributes significantly to the system properties because of its extremely high surface-to-volume ratio in nanofluids. The systems engineering approach was applied to nanofluid design resulting in a detailed assessment of various parameters in the multivariable nanofluid systems. The relative importance of nanofluid parameters for heat transfer evaluated in this article allows engineering nanofluids with desired set of properties.

Mechanisms and models of effective thermal conductivities of nanofluids.

The physical mechanisms and mathematical models of the effective thermal conductivities of nanofluids have long been of interest to the nanofluid research community because the effective thermal conductivities of nanofluids cannot generally be fully explained and predicted by classical effective medium theories. This review article summarizes considerable progress made on this topic. Specifically, the physical mechanisms and mathematical models of the effective thermal conductivities of nanofluids are reviewed, the potential contributions of those physical mechanisms are evaluated, and the comparisons of the theoretical predictions and experimental data are presented along with opportunities for future research.

Particle size and interfacial effects on thermo-physical and heat transfer characteristics of water-based alpha-SiC nanofluids.

The effect of average particle sizes on basic macroscopic properties and heat transfer performance of alpha-SiC/water nanofluids was investigated. The average particle sizes, calculated from the specific surface area of nanoparticles, were varied from 16 to 90 nm. Nanofluids with larger particles of the same material and volume concentration provide higher thermal conductivity and lower viscosity increases than those with smaller particles because of the smaller solid/liquid interfacial area of larger particles. It was also demonstrated that the viscosity of water-based nanofluids can be significantly decreased by pH of the suspension independently from the thermal conductivity. Heat transfer coefficients were measured and compared to the performance of base fluids as well as to nanofluids reported in the literature. Criteria for evaluation of the heat transfer performance of nanofluids are discussed and optimum directions in nanofluid development are suggested.