Evaluation of the Dimensional Accuracy of Robot-Guided Laser Osteotomy in Reconstruction with Patient-Specific Implants-An Accuracy Study of Digital High-Tech Procedures.

Background/Objective: With the rapid advancement in surgical technologies, new workflows for mandibular reconstruction are constantly being evaluated. Cutting guides are extensively employed for defining osteotomy planes but are prone to errors during fabrication and positioning. A virtually defined osteotomy plane and drilling holes in robotic surgery minimize potential sources of error and yield highly accurate outcomes. Methods: Ten mandibular replicas were evaluated after cutting-guided saw osteotomy and robot-guided laser osteotomy following reconstruction with patient-specific implants. The descriptive data analysis summarizes the mean, standard deviation (SD), median, minimum, maximum, and root mean square (RMS) values of the surface comparison for 3D printed models regarding trueness and precision. Results: The saw group had a median trueness RMS value of 2.0 mm (SD ± 1.7) and a precision of 1.6 mm (SD ± 1.4). The laser group had a median trueness RMS value of 1.2 mm (SD ± 1.1) and an equal precision of 1.6 mm (SD ± 1.4). These results indicate that robot-guided laser osteotomies have a comparable accuracy to cutting-guided saw osteotomies, even though there was a lack of statistical significance. Conclusions: Despite the limited sample size, this digital high-tech procedure has been shown to be potentially equivalent to the conventional osteotomy method. Robotic surgery and laser osteotomy offers enormous advantages, as they enable the seamless integration of precise virtual preoperative planning and exact execution in the human body, eliminating the need for surgical guides in the future.

A cross-sectional study of the anatomy of the jaws of a central-European caucasian population using cone beam computer tomography as a prerequisite for designing pre-formed calcium phosphate cement scaffolds.

PURPOSE: This study aims to measure the cortical and cancellous bone thickness in the upper and lower jaws, serving as a data template for developing pre-defined calcium phosphate cement primary implant forms. These measurements are crucial for creating a biphasic scaffold. METHODS: Forty complete jaws were assessed for cortical bone shape and thickness using statistical analysis and specific software tools. Sex and age were considered, and four groups were created. RESULTS: The cumulative thickness of the cortical layer varied from region to region. In both the upper and lower jaws, the cortical layer in the molar region was significantly thicker than in the frontal region. Within the alveolar process, cortical thickness increases with distance from the alveolar crest on both sides. The oral side of the lower jaw is significantly thicker than the vestibular side. For the upper jaw, no significant differences between the oral and vestibular sides were found in this study. Additionally, it is noteworthy that men have a significantly thicker cortical layer than women. Regarding age, no significant overall differences were found. CONCLUSION: Mathematical analysis of anatomical forms using polynomial functions improves understanding of jaw anatomy. This approach facilitates the design of patient-specific scaffold structures, minimizing the need for costly and time-consuming planning and enabling more efficient implementation of optimal therapy.

Arecoline in buccal cells reflects Areca nut dose.

Areca nut (AN) is a carcinogen; its chewing cessation is, therefore, of worldwide interest. However, cessation biomarkers are lacking. We sought to establish arecoline in chewers' buccal cells (BCs) as a biomarker for AN dose. Self-reported AN doses, expressed as the average AN load ("AANL"), the product of AN amount, chewing time, and chewing frequency, were correlated by regression analysis with chewers' BC arecoline, measured by liquid chromatography mass spectrometry. We then determined whether associations differed between Class 1 chewers (who consume AN alone or with slaked lime, leaf, and/or spices) and Class 2 chewers (who consume any combination of the aforementioned ingredients plus tobacco). Among the 103 chewers, 28 Class 1 and 39 Class 2 chewers had detectable arecoline levels, which were used for analyses. A linear regression of cube-root transformed AANL on equally transformed BC arecoline levels provided the best model fit; resulting slopes and corresponding correlation coefficients were 0.86 and 0.40 (p < 0.01) for all; 1.09 and 0.51 (p < 0.01) for Class 1 chewers; 0.35 and 0.17 (p = 0.29) for Class 2 chewers; and 0.94 and 0.45 (p < 0.01), and 0.79 and 0.37 (p = 0.08), respectively, for those who included or excluded lime. Relationships between AANL and BC arecoline levels were similar between chewers who included or excluded lime (p = 0.76), but less between chewing classes (p = 0.14). This provides confidence that BC arecoline can generally act as a reliable biomarker for AN dose, useful for estimating efficacy in AN cessation studies and population-based chewing assessments.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Development of a test bench for biomechanical simulation-a preliminary study of mandibular forces.

Purpose: The aim of this study is to develop a test bench, which integrates different complexity levels and enables in that way a flexible and dynamic testing for mid and long term intervals as well as testing of maximum loads till implant failure of different osteosynthesis systems on the mandible. Material and Methods: For this purpose, an analysis of the state of the art regarding existing test benches was combined with interviews of clinical experts to acquire a list of requirements. Based on these requirements a design for a modular test bench was developed. During the implementation of the test stand, functional tests were continuously carried out and improvements made. Depending on the level of complexity, the test bench can be used either as an incorporated variant or as a standalone solution. In order to verify the performance and the degree of fulfilment of the requirements of these two variants of the test bench, preliminary studies were carried out for all levels of complexity. In these preliminary studies, commercially available osteosynthesis and reconstruction plates were investigated for their biomechanical behaviour and compared with data from the literature. Results: In total, fourteen test runs were performed for the different levels of complexity. Firstly, five test runs were executed to test the simplified load scenario in the incorporated variant of the test bench. High forces could be transmitted without failure of the miniplates. Secondly a quasi-static test scenario was examined using the incorporated variant with simplified load insertion. Five experiments with a number of cycles between 40,896 and 100,000 cycles were carried out. In one case the quasi-static testing resulted in a fracture of the tested reconstruction plate with a failure mode similar to the clinical observations of failure. The last four test runs were carried out using the standalone variant of the test bench simulating complex load patterns via the insertion of forces through imitated muscles. During the test runs joint forces were measured and the amplitude and vector of the resulting joint forces were calculated for both temporomandibular joints. Differences in the force transmission depending on the implant system in comparison to the zero sample could be observed. Conclusion: The presented modular test bench showed to be applicable for examination of the biomechanical behavior of the mandible. It is characterized by the adjustability of the complexity regarding the load patterns and enables the subsequent integration of further sensor technologies. Follow-up studies are necessary to further qualify and optimize the test bench.

Three-dimensional measurements of symmetry for the mandibular ramus.

BACKGROUND: The study examines a sample of patients presenting for viscerocranial computer tomography that does not display any apparent signs of asymmetry, assesses the three-dimensional congruency of the mandibular ramus, and focuses on differences in age and gender. METHODS: This cross-sectional cohort study screened viscerocranial CT data of patients without deformation or developmental anomalies. Segmentations were obtained from the left and right sides and superimposed according to the best-fit alignment. Comparisons were made to evaluate three-dimensional congruency and compared between subgroups according to age and gender. RESULTS: Two hundred and sixty-eight patients were screened, and one hundred patients met the inclusion criteria. There were no statistical differences between the left and right sides of the mandibular ramus. Also, there were no differences between the subgroups. The overall root mean square was 0.75 ± 0.15 mm, and the mean absolute distance from the mean was 0.54 ± 0.10 mm. CONCLUSION: The mean difference was less than one millimetre, far below the two-millimetre distance described in the literature that defines relative symmetry. Our study population displays a high degree of three-dimensional congruency. Our findings help to understand that there is sufficient three-dimensional congruency of the mandibular ramus, thus contributing to facilitating CAD-CAM-based procedures based on symmetry for this specific anatomic structure.

Associations between Plasma Tocopherols and Lung Cancer Risk: Results from the Southern Community Cohort Study.

BACKGROUND: Despite the various anticancer activities of tocopherols, little is known about tocopherols associated with lung cancer risk among low-income African Americans (AA) and European Americans (EA) who are disproportionately affected by the disease. METHODS: We conducted a nested case-control study that included 209 incident lung cancer cases and 406 matched controls within the Southern Community Cohort Study. Using biospecimens collected at cohort enrollment, plasma levels of α-, ß/γ-, δ-, and total-tocopherols were measured by high-performance liquid chromatography with photodiode array detection. Conditional logistic regression was used to estimate ORs and 95% confidence intervals (CI) for lung cancer risk after adjusting for potential confounders. Stratified analyses were also conducted. RESULTS: Plasma levels of total-tocopherols were inversely associated with lung cancer risk overall [OR (95% CI) for the highest vs. lowest tertile = 0.51 (0.30-0.90)]. The inverse association remained significant among EAs [0.20 (0.06-0.65)], men [0.43 (0.21-0.90)], current smokers [0.49 (0.26-0.93)], and cases diagnosed within 2 years of blood draw [0.36 (0.15-0.86)], though we did not find a significant risk reduction among AAs [0.75 (0.39-1.45)]. Notably, we found significant interactions between α-tocopherol and race after controlling the FDR to correct for multiple comparisons (Pinteraction = 0.02). CONCLUSIONS: Our results indicate that plasma total-tocopherols are inversely associated with lung cancer risk, but the association may differ across specific isomeric forms of tocopherols, race, or other individuals' characteristics. Further large-scale studies are warranted to confirm our findings. IMPACT: Recommendations on tocopherols for lung cancer prevention should take isomers, race, and smoking behaviors into consideration.

Association of Endocrine Disrupting Chemicals With the Metabolic Syndrome Among Women in the Multiethnic Cohort Study.

Metabolic syndrome (MetS) is associated with a high risk of cardiovascular disease, a leading cause of death among women. MetS is a diagnosis of at least 3 of the following: high blood pressure, high fasting glucose, high triglycerides, high waist circumference, and low high-density lipoprotein cholesterol. Epidemiological studies suggest that endocrine disrupting chemical (EDC) exposure is positively associated with individual components of MetS, but evidence of an association between EDCs and MetS remains inconsistent. In a cross-sectional analysis within the Multiethnic Cohort Study, we evaluated the association between 4 classes of urinary EDCs (bisphenol A [BPA], triclosan, parabens, and phthalates) and MetS among 1728 women. Multivariable logistic regression was used to estimate odds ratios and 95% CI for the association between tertiles of each EDC and MetS adjusting for age, body mass index (BMI), racial and ethnic group, and breast cancer status. Stratified analyses by race and ethnicity and BMI were conducted. MetS was identified in 519 (30.0%) women. We did not detect statistically significant associations of MetS with BPA, triclosan, or phthalate metabolite excretion. MetS was inversely associated with total parabens (Ptrend = .002). Although there were suggestive inverse associations between EDCs and MetS among Latino and African American women, and women with BMI < 30 kg/m2, there was no statistically significant heterogeneity in associations by race and ethnicity or BMI. These findings suggest an inverse association between parabens and MetS in larger multiethnic studies. Prospective analyses to investigate suggested differences in associations by race, ethnicity, and BMI are warranted.

Alloplastic reconstruction of the mandible after subtotal mandibulectomy for medication-related osteonecrosis of the jaw: An update of the method.

BACKGROUND: Reconstruction of continuity defects following osteonecrosis in multimorbid patients is challenging. In all cases of the predescribed palliative treatment method for alloplastic mandible reconstruction, plate fractures were detected in follow-up. We hypothesized that a modification could avoid these fractures, leading to stable long-term results. METHODS: This retrospective study compares the original method with a modification using single, laser-sintered CAD-CAM plates instead of manually bent miniplates. The predescribed shuttering technique was used to reconstruct the mandible in its original shape with bone cement. RESULTS: Uneventful wound healing was observed in 86% of the cases after modification of the method. No implant or plate fracture occurred. CONCLUSIONS: The presented method should be considered as a treatment option for mandible reconstruction in elderly, multimorbid patients in palliative situations. The results of this study suggest that the modification of the method leads to significantly improved long-term stability. Donor site morbidity is avoided with this method of palliative surgery.

The Betel Nut Intervention Trial (BENIT)-A Randomized Clinical Trial for Areca Nut and Betel Quid Cessation: Primary Outcomes.

BACKGROUND: Areca nut and betel quid (ANBQ) chewing is a widespread carcinogenic habit. The BENIT (ClinicalTrials-NCT02942745) is the first known randomized trial designed for ANBQ chewers. METHODS: We compared the intensive behavioral treatment intervention condition (IC) with the control condition (CC) in the BENIT and included a 5-stage early stopping rule. We report the primary analysis at stage 3. English-literate adults in Guam and Saipan who self-identified as ANBQ chewers with tobacco were enrolled between August 2016 and August 2020. IC participants (n = 88) received five in-person sessions over 22 days and a brochure containing quitting advice. CC participants (n = 88) received only the brochure. Participants were assessed at baseline and on day 22 of follow-up. Self-reported chewing status at day 22 was determined by a composite of two survey items with disparate wording and response options for cross-verification. RESULTS: Cessation rates were 38.6% (IC) and 9.1% (CC). Proportional hazards regression revealed a p = 0.0058, which met the Stage 3 criteria for significance, and an estimated reduction in ANBQ chewing for IC compared to the CC of 71% (95% CI: 41%-88%). CONCLUSIONS: Robust self-reported intervention effects at day 22 suggest that intensive cessation programs such as BENIT should be further developed and implemented on a larger scale.

Probing real-world Central European population midfacial skeleton symmetry for maxillofacial surgery.

OBJECTIVES: Symmetry is essential for computer-aided surgical (CAS) procedures in oral and maxillofacial surgery (OMFS). A critical step for successful CAS is mirroring the unaffected side to create a template for the virtual reconstruction of the injured anatomical structure. The aim was to identify specific anatomical landmarks of the midfacial skeleton, to evaluate the symmetry in a group of the real-world Central European population, and to use these landmarks to assess midfacial symmetry in CT scans. MATERIAL AND METHODS: The retrospective cross-sectional study defined landmarks of the midface's bony contour using viscerocranial CT data. The distances of the skeletal landmarks (e.g., the frontozygomatic suture and temporozygomatic suture) of the left and right sides from the midline were measured and statistically compared. Midfacial symmetry for reference points was defined as a difference within 0 mm and their mean difference plus one standard deviation. RESULTS: We examined a total of 101 CT scans. 75% of our population shows symmetrical proportions of the midface. The means of the differences for the left and right sides ranged from 0.8 to 1.3 mm, averaging 1.1 ± 0.2 mm for all skeletal landmarks. The standard deviations ranged from 0.6 to 1.4 mm, with a computed mean of 0.9 ± 0.3 mm. CONCLUSION: We established a methodology to assess the symmetry of the bony midface. If the determined differences were equal to or lower than 2.5 mm in the mentioned midfacial skeletal landmarks, then the symmetry of the bony midface was considered present, and symmetry-based methods for CAS procedures are applicable. CLINICAL RELEVANCE: Many CAS procedures require facial symmetry. We provide an easy-to-apply method to probe for symmetry of the midface. The method may be used for population-based research, to check for proper reduction of fractures after reposition or to screen for symmetry prior to CAS planning.

Circulating 27-hydroxycholesterol, lipids, and steroid hormones in breast cancer risk: a nested case-control study of the Multiethnic Cohort Study.

BACKGROUND: Laboratory studies have indicated that a cholesterol metabolite and selective estrogen receptor modulator, 27-hydroxycholesterol (27HC), may be important in breast cancer etiology and explain associations between obesity and postmenopausal breast cancer risk. Epidemiologic evidence for 27HC in breast cancer risk is limited, particularly in multiethnic populations. METHODS: In a nested case-control study of 1470 breast cancer cases and 1470 matched controls within the Multiethnic Cohort Study, we examined associations of pre-diagnostic circulating 27HC with breast cancer risk among African American, Japanese American, Native Hawaiian, Latino, and non-Latino White postmenopausal females. We used multivariable logistic regression adjusted for age, education, parity, body mass index, and smoking status. Stratified analyses were conducted across racial and ethnic groups, hormone receptor (HR) status, and use of lipid-lowering drugs. We assessed interactions of 27HC with steroid hormones. RESULTS: 27HC levels were inversely related to breast cancer risk (odds ratio [OR] 0.80; 95% confidence interval [CI] 0.58, 1.12), but the association was not statistically significant in the full model. Directions of associations differed by racial and ethnic group. Results suggested an inverse association with HR-negative breast cancer (OR 0.46; 95% CI 0.20, 1.06). 27HC interacted with testosterone, but not estrone, on risk of breast cancer; 27HC was only inversely associated with risk among those with the highest levels of testosterone (OR 0.46; 95% CI 0.24, 0.86). CONCLUSION: This is the first US study to examine circulating 27HC and breast cancer risk and reports a weak inverse association that varies across racial and ethnic groups and testosterone level.

Particulate matter, traffic-related air pollutants, and circulating C-reactive protein levels: The Multiethnic Cohort Study.

Inhaled particles and gases can harm health by promoting chronic inflammation in the body. Few studies have investigated the relationship between outdoor air pollution and inflammation by race and ethnicity, socioeconomic status, and lifestyle risk factors. We examined associations of particulate matter (PM) and other markers of traffic-related air pollution with circulating levels of C-reactive protein (CRP), a biomarker of systemic inflammation. CRP was measured from blood samples obtained in 1994-2016 from 7,860 California residents participating in the Multiethnic Cohort (MEC) Study. Exposure to PM (aerodynamic diameter ≤2.5 µm [PM2.5], ≤10 µm [PM10], and between 2.5 and 10 µm [PM10-2.5]), nitrogen oxides (NOx, including nitrogen dioxide [NO2]), carbon monoxide (CO), ground-level ozone (O3), and benzene averaged over one or twelve months before blood draw were estimated based on participants' addresses. Percent change in geometric mean CRP levels and 95% confidence intervals (CI) per standard concentration increase of each pollutant were estimated using multivariable generalized linear regression. Among 4,305 females (55%) and 3,555 males (45%) (mean age 68.1 [SD 7.5] years at blood draw), CRP levels increased with 12-month exposure to PM10 (11.0%, 95% CI: 4.2%, 18.2% per 10 µg/m3), PM10-2.5 (12.4%, 95% CI: 1.4%, 24.5% per 10 µg/m3), NOx (10.4%, 95% CI: 2.2%, 19.2% per 50 ppb), and benzene (2.9%, 95% CI: 1.1%, 4.6% per 1 ppb). In subgroup analyses, these associations were observed in Latino participants, those who lived in low socioeconomic neighborhoods, overweight or obese participants, and never or former smokers. No consistent patterns were found for 1-month pollutant exposures. This investigation identified associations of primarily traffic-related air pollutants, including PM, NOx, and benzene, with CRP in a multiethnic population. The diversity of the MEC across demographic, socioeconomic, and lifestyle factors allowed us to explore the generalizability of the effects of air pollution on inflammation across subgroups.

Genome-wide association study of abdominal MRI-measured visceral fat: The multiethnic cohort adiposity phenotype study.

Few studies have explored the genetic underpinnings of intra-abdominal visceral fat deposition, which varies substantially by sex and race/ethnicity. Among 1,787 participants in the Multiethnic Cohort (MEC)-Adiposity Phenotype Study (MEC-APS), we conducted a genome-wide association study (GWAS) of the percent visceral adiposity tissue (VAT) area out of the overall abdominal area, averaged across L1-L5 (%VAT), measured by abdominal magnetic resonance imaging (MRI). A genome-wide significant signal was found on chromosome 2q14.3 in the sex-combined GWAS (lead variant rs79837492: Beta per effect allele = -4.76; P = 2.62 × 10-8) and in the male-only GWAS (lead variant rs2968545: (Beta = -6.50; P = 1.09 × 10-9), and one suggestive variant was found at 13q12.11 in the female-only GWAS (rs79926925: Beta = 6.95; P = 8.15 × 10-8). The negatively associated variants were most common in European Americans (T allele of rs79837492; 5%) and African Americans (C allele of rs2968545; 5%) and not observed in Japanese Americans, whereas the positively associated variant was most common in Japanese Americans (C allele of rs79926925, 5%), which was all consistent with the racial/ethnic %VAT differences. In a validation step among UK Biobank participants (N = 23,699 of mainly British and Irish ancestry) with MRI-based VAT volume, both rs79837492 (Beta = -0.026, P = 0.019) and rs2968545 (Beta = -0.028, P = 0.010) were significantly associated in men only (n = 11,524). In the MEC-APS, the association between rs79926925 and plasma sex hormone binding globulin levels reached statistical significance in females, but not in males, with adjustment for total adiposity (Beta = -0.24; P = 0.028), on the log scale. Rs79837492 and rs2968545 are located in intron 5 of CNTNAP5, and rs79926925, in an intergenic region between GJB6 and CRYL1. These novel findings differing by sex and racial/ethnic group warrant replication in additional diverse studies with direct visceral fat measurements.

Methodology: workflow for virtual reposition of mandibular condyle fractures.

BACKGROUND: Even though mandibular condyle fractures have a high clinical relevance, their treatment remains somewhat challenging. Open reduction and internal fixation are difficult due to narrow surgical approaches, poor overview during reduction, and a possible risk of facial nerve damage. In times of technical endeavors in surgery, there is a trend towards the usage of stable CAD-CAM-implants from additive manufacturing or titanium laser sintering. Up until now, there have not been any reports of fracture treatment of the mandibular condyle using this technique. RESULTS AND CONCLUSION: We present a workflow for virtual repositioning of the fractured mandibular condyle, to manufacture patient-specific implants for osteosynthesis with the intention of use of resorbable metal alloys in the future.

Salivary Areca and tobacco alkaloids for bioverification in the Betel Nut Intervention Trial.

BACKGROUND: The Betel Nut Intervention Trial (BENIT) is the first known randomized controlled intervention trial designed to help minority Pacific Islanders in Guam and Saipan quit chewing the carcinogenic Areca catechu nut (AN). We report the BENIT's saliva bioverification results against the self-reported chewing status ("quitter" or "chewer") at day 22 follow-up. MATERIAL AND METHODS: AN-specific (arecoline, arecaidine, guvacoline, and guvacine) and tobacco-specific (nicotine, cotinine, and hydroxycotinine) alkaloids were analyzed in saliva from 176 BENIT participants by an established and sensitive liquid chromatography mass spectrometry-based assay. RESULTS: The combined four AN alkaloid levels decreased from baseline in quitters (n = 50) and chewers (n = 108) by 32% and 9%, respectively. In quitters, decreases were significant for arecoline (p = 0.044)-the most prominent AN alkaloid, along with arecaidine (p = 0.042) and nicotine (p = 0.011). In chewers, decreases were significant only for hydroxycotinine (p = 0.004). Similar results were obtained when quitters and chewers were stratified by treatment arm. DISCUSSION: Salivary AN alkaloid levels generally agreed with self-reported chewing status, which suggests the former can be used to verify the latter. CONCLUSION: Our results can help to objectively evaluate compliance and program effectiveness in AN cessation programs.

Cost minimization analysis of indication-specific osteosynthesis material in oral and maxillofacial surgery.

PURPOSE: Following the introduction of the Regulation (EU) 2017/745 by the European Parliament, any bioactive substance or surgical implant introduced into the human body must be documented. The regulation requires any implant to be traced back to the manufacturer. Lot numbers need to be available for every single medical implant. Also, the manufacturer is required by law to provide implants individually packaged and sterilized. Previously, model tray systems (MOS tray) were used for osteosynthesis in oral and maxillofacial surgery, in which the individual implants could not be registered separately. The new regulation made it impossible to use such processes during surgery anymore and a need for a change in the medical practice surged. We examined a possible solution for the new legislation. The aim of this prospective cohort study is to analyze the MOS tray systems to osteosynthesis materials prepackaged in sets. We record and evaluate parameters such as surgical time and documentation time. We perform a short cost analysis of our clinic. The primary aim is to determine how much time is gained or lost by the mandatory increased patient safety. The secondary aim is to describe change in costs. METHODS: Patients that underwent standard surgical procedures in the clinic of oral and maxillofacial surgery of the faculty hospital Carl Gustav Carus in Dresden were included. We chose open reduction and internal fixation (ORIF) of anterior mandibular corpus fractures as well as mandibular advancement by means of bilateral sagittal split osteotomies (BSSO) as standardized procedures. Both of these procedures require two osteosynthesis plates and at least four screws for each plate. MOS trays were compared to prepackaged sterilized sets. The sets include a drill bit, two plates, and eight 5-mm screws. A total number of 40 patients were examined. We allocated 20 patients to the ORIF group and the other 20 patients to the BSSO group. Each group was evenly subdivided into a MOS tray group and a prepackaged group. Parameters such as the incision-suture time (IST) as well as the documentation time (DT) by the operating room (OR) staff to complete documentation for the implants are the main focus of investigation. RESULTS: For open reduction, the incision-suture time was significantly different in favor of the MOS tray (p < 0.05). There was no difference in the BSSO groups. However, we observed a significantly different (p < 0.01) documentation time advantage for the prepackaged sets in both the ORIF and BSSO groups. On top of that, we find that by using the prepackaged kits, we are able to reduce sterilization costs by €11.53 per size-reduced container. Also, there is also a total cut of costs of €38.90 and €43.70, respectively, per standardized procedure for implant material. CONCLUSIONS: By law, a change in the method of approaching surgery is necessary. For standardized procedures, the right choice of implants can lead to a reduction of documentation time and costs for implant material, sterilization, as well as utilizing less instruments. This in turn leads to lower costs for perioperative processing as well as provision of state-of-the-art implant quality implementing higher patient security.

Body Fat Distribution, Glucose Metabolism, and Diabetes Status Among Older Adults: The Multiethnic Cohort Adiposity Phenotype Study.

BACKGROUND: As the proportion of visceral (VAT) to subcutaneous adipose tissue (SAT) may contribute to type 2 diabetes (T2D) development, we examined this relation in a cross-sectional design within the Multiethnic Cohort that includes Japanese Americans known to have high VAT. The aim was to understand how ectopic fat accumulation differs by glycemic status across ethnic groups with disparate rates of obesity, T2D, and propensity to accumulate VAT. METHODS: In 2013-2016, 1,746 participants aged 69.2 (standard deviation, 2.7) years from five ethnic groups completed questionnaires, blood collections, and whole-body dual X-ray absorptiometry and abdominal magnetic resonance imaging scans. Participants with self-reported T2D and/or medication were classified as T2D, those with fasting glucose >125 and 100-125 mg/dL as undiagnosed cases (UT2D) and prediabetes (PT2D), respectively. Using linear regression, we estimated adjusted means of adiposity measures by T2D status. RESULTS: Overall, 315 (18%) participants were classified as T2D, 158 (9%) as UT2D, 518 (30%) as PT2D, and 755 (43%) as normoglycemic (NG), with significant ethnic differences (P < 0.0001). In fully adjusted models, VAT, VAT/SAT, and percent liver fat increased significantly from NG, PT2D, UT2D, to T2D (P < 0.001). Across ethnic groups, the VAT/SAT ratio was lowest for NG participants and highest for T2D cases. Positive trends were observed in all groups except African Americans, with highest VAT/SAT in Japanese Americans. CONCLUSION: These findings indicate that VAT plays an important role in T2D etiology, in particular among Japanese Americans with high levels of ectopic adipose tissue, which drives the development of T2D to a greater degree than in other ethnic groups.

Interplay between diet and gut microbiome, and circulating concentrations of trimethylamine N-oxide: findings from a longitudinal cohort of US men.

OBJECTIVES: Gut-produced trimethylamine N-oxide (TMAO) is postulated as a possible link between red meat intake and poor cardiometabolic health. We investigated whether gut microbiome could modify associations of dietary precursors with TMAO concentrations and cardiometabolic risk markers among free-living individuals. DESIGN: We collected up to two pairs of faecal samples (n=925) and two blood samples (n=473), 6 months apart, from 307 healthy men in the Men's Lifestyle Validation Study. Diet was assessed repeatedly using food-frequency questionnaires and diet records. We profiled faecal metagenome and metatranscriptome using shotgun sequencing and identified microbial taxonomic and functional features. RESULTS: TMAO concentrations were associated with the overall microbial compositions (permutational analysis of variance (PERMANOVA) test p=0.001). Multivariable taxa-wide association analysis identified 10 bacterial species whose abundance was significantly associated with plasma TMAO concentrations (false discovery rate <0.05). Higher habitual intake of red meat and choline was significantly associated with higher TMAO concentrations among participants who were microbial TMAO-producers (p<0.05), as characterised based on four abundant TMAO-predicting species, but not among other participants (for red meat, P-interaction=0.003; for choline, P-interaction=0.03). Among abundant TMAO-predicting species, Alistipes shahii significantly strengthened the positive association between red meat intake and HbA1c levels (P-interaction=0.01). Secondary analyses revealed that some functional features, including choline trimethylamine-lyase activating enzymes, were associated with TMAO concentrations. CONCLUSION: We identified microbial taxa that were associated with TMAO concentrations and modified the associations of red meat intake with TMAO concentrations and cardiometabolic risk markers. Our data underscore the interplay between diet and gut microbiome in producing potentially bioactive metabolites that may modulate cardiometabolic health.

Phytoestrogens and lung cancer risk: a nested case-control study in never-smoking Chinese women.

BACKGROUND: Since several lines of evidence suggest that estrogens may be involved in lung carcinogenesis, it has been hypothesized that intake of phytoestrogens, similar in molecular structure to mammalian estrogens, may be associated with lung cancer development. OBJECTIVE: The aim was to prospectively evaluate the association between phytoestrogen exposure and lung cancer risk in never-smoking women. METHODS: We conducted a nested case-control study within a population-based prospective cohort study of women. A total of 478 incident lung cancer cases and their individually matched controls were identified among never-smoking women after a mean follow-up of 15.6 years. Habitual intake of and internal exposure to phytoestrogens were assessed by repeated dietary surveys and urinary biomarkers, respectively. ORs and 95% CIs for lung cancer were estimated in conditional logistic regression models. RESULTS: After adjustment for potential confounders, a moderate intake of dietary isoflavones was inversely associated with lung cancer risk in never-smoking women, with the OR for the second quartile vs. the lowest quartile of intake being 0.52 (95% CI: 0.35, 0.76). Further increasing intake did not convey additional benefits, with ORs (95% CI) for the third and fourth quartiles of 0.53 (0.36, 0.78) and 0.47 (0.31, 0.72), respectively (P-overall < 0.001 and P-nonlinearity = 0.006). A similar association was seen when exposure to isoflavones was assessed by urinary biomarkers. ORs (95% CI) for the second, third, and fourth quartiles compared with the lowest quartile of urinary isoflavone excretion were 0.57 (0.39, 0.83), 0.64 (0.44, 0.92), and 0.60 (0.41, 0.86), respectively. The inverse association reached a plateau beyond the second quartile, with P-overall = 0.04 and P-nonlinearity = 0.15. Urinary excretion of gut-microbiota-derived metabolites of lignans was not related to lung cancer risk. CONCLUSIONS: This study suggests that moderately increasing intake of isoflavone-rich foods is associated with lower risk of lung cancer in never-smoking women.