Mucosa-penetrating liposomes for esophageal local drug delivery.

Local drug delivery to the esophagus is hampered by rapid transit time and poor permeability of the mucosa. If some strategies aimed to improve the residence time have been proposed, non-invasive approaches to increase the drug penetration in the mucosa have not been described so far. Herein, we designed mucosa-penetrating liposomes to favor the penetration and retention of curcumin (CURC) in the esophagus. A novel mucosa penetrating peptide (MPP), SLENKGP, was selected by Phage Display and conjugated to pegylated liposomes at different PEG and MPP's surface densities. Pegylation assured a long residence time of liposomes (at least 30 min) in the esophagus in vivo, but it did not favor the penetration of CURC in the mucosa. MPP-decorated liposomes instead delivered a significant higher amount of CURC in the mucosa compared to naked pegylated liposomes. Confocal microscopy studies showed that naked pegylated liposomes remain confined in the superficial layers of the mucosa whereas MPP-decorated liposomes penetrate the whole epithelium. In vitro, MPP reduced the interaction of PEG with mucin, meanwhile favoring the paracellular penetration of liposomes across epithelial cell multilayers. In conclusion, pegylated liposomes represent a valid approach to target the esophagus and the surface functionalization with MPP enhances their penetration in the mucosa.

Feeding Next-Generation Nanomedicines to Europe: Regulatory and Quality Challenges.

New and innovative nanomedicines have been developed and marketed over the past half-century, revolutionizing the prognosis of many human diseases. Although a univocal regulatory definition is not yet available worldwide, the term "nanomedicines" generally identifies medicinal products that use nanotechnology in their design or production. Due to the intrinsic high structural complexity of these products, the scientific and regulatory communities are reflecting on how to revise the regulatory framework to provide a more appropriate benefit/risk balance to authorize them on the market, considering the impact of their peculiar physicochemical features in the evaluation of efficacy and safety patterns. Herein, a critical perspective is provided on the current open issues regarding regulatory qualification and physicochemical characterization of nanosystems considering the current European regulatory framework on nanomedicine products. Practicable paths for improving their quality assurance and predicting their fate in vivo are also argued. Strengthening the multilevel alliance among academic institutions, industrial stakeholders, and regulatory authorities seems strategic to support innovation by standard approaches (e.g., qualification, characterization, risk assessment), and to expand current knowledge, also benefiting from the new opportunities offered by artificial intelligence and digitization in predictive modelling of the impact of nanomedicine characteristics on their fate in vivo.

Micelles-in-Liposome Systems Obtained by Proliposomal Approach for Cannabidiol Delivery: Structural Features and Skin Penetration.

Deformable liposomes represent valuable drug carriers for cutaneous administration. Nevertheless, the fluid lipid membrane can favor the drug leakage during storage. Proliposomes may represent a suitable strategy to solve this issue. As an alternative, a novel carrier, which encloses hydrophobic drugs in the inner core of vesicles, namely, a drug-in-micelles-in-liposome system (DiMiL), has been proposed. In this work, we investigated the possible advantages of combining these two approaches to obtain a formulation able to enhance the skin penetration of cannabidiol (CBD). Proliposomes were prepared by spray-drying or slurry method testing lactose, sucrose, and trehalose as carriers at different sugar/lipid weight ratios. The ratio between soy-phosphatidylcholine (main lipid) and Tween 80 was instead fixed at 85:15 w/w. DiMiL systems were extemporaneously obtained by the hydration of proliposomes with a Kolliphor HS 15 micellar dispersion (containing CBD, when appropriate). Based on the technological properties, sucrose and trehalose at 2:1 sugar/lipid ratio resulted in the best carriers for spray-dried and "slurried" proliposomes, respectively. Cryo-EM images clearly showed the presence of micelles in the aqueous core of lipid vesicles and the presence of sugars did not alter the structural organization of DiMiL systems, as demonstrated by SAXS analyses. All formulations were highly deformable and able to control CBD release regardless of the presence of sugar. The permeation through human epidermis of CBD carried by DiMiL systems was significantly improved compared to that obtained loading the drug in conventional deformable liposomes with the same lipid composition or in an oil solution. Furthermore, the presence of trehalose led to a further slight increase of the flux. Altogether, these results demonstrated that proliposomes may be a valuable intermediate for the preparation of deformable liposome-based cutaneous dosage forms, improving the stability without compromising the overall performances.

Is PEGylation of Drugs Associated with Hypersensitivity Reactions? An Analysis of the Italian National Spontaneous Adverse Drug Reaction Reporting System.

BACKGROUND AND OBJECTIVE: Evidence highlights the allergenic potential of PEGylated drugs because of the production of anti-polyethylene glycol immunoglobulins. We investigated the risk of hypersensitivity reactions of PEGylated drugs using the Italian spontaneous adverse drug reaction reporting system database. METHODS: We selected adverse drug reaction reports attributed to medicinal products containing PEGylated active substances and/or PEGylated liposomes from the Italian Spontaneous Reporting System in the period between its inception and March 2021. As comparators, we extracted adverse drug reaction reports of medicinal products containing the same non-PEGylated active substances and/or non-PEGylated liposomes (or compounds belonging to the same mechanistic class). A descriptive analysis of reports of hypersensitivity reactions was performed. Reporting rates and time to onset of hypersensitivity reactions were also calculated in the period between January 2009 and March 2021. As a measure of disproportionality, we calculated the reporting odds ratio. RESULTS: Overall, 3865 adverse drug reaction reports were related to PEGylated medicinal products and 11,961 to their non-PEGylated comparators. Around two-thirds of patients were female and reports mostly concerned patients aged between 46 and 64 years. The frequency of hypersensitivity reactions reporting was higher among PEGylated versus non-PEGylated medicinal products (11.7% vs 9.4%, p < 0.0001). The hypersensitivity reaction reporting rates were higher for PEGylated medicinal products versus non-PEGylated medicinal products, with reporting rate ratios that ranged from 1.4 (95% confidence interval 0.8-2.5) for pegfilgrastim versus filgrastim to 20.0 (95% confidence interval 2.8-143.5) for peginterferon alpha-2a versus interferon alpha-2a. The median time to onset of hypersensitivity reactions was 10 days (interquartile range: 0-61) for PEGylated medicinal products, and 36 days (interquartile range: 3-216) for non-PEGylated comparators. Statistically significant reporting odds ratios were observed when comparing the reporting of hypersensitivity reactions for PEGylated versus non-PEGylated medicinal products (reporting odds ratio: 1.3; 95% confidence interval 1.1-1.4). However, when using all other drugs as comparators, the disproportionality analysis showed no association with hypersensitivity reactions for PEGylated nor non-PEGylated medicinal products, thus suggesting that many other triggers of drug-induced hypersensitivity reactions play a major role. CONCLUSIONS: The findings of this analysis of the Italian spontaneous adverse drug reaction database suggest a potential involvement for PEGylation in triggering drug-related hypersensitivity reactions, especially clinically relevant reactions. However, when comparing both PEGylated and non-PEGylated drugs under study to all other drugs no disproportionate reporting of hypersensitivity reactions was observed, probably due to a masking effect owing to the presence in the same database of other medicinal products increasing the threshold required to highlight a safety signal when the entire database is used as a reference.

Spotlight on Calcipotriol/Betamethasone Fixed-Dose Combination in Topical Formulations: Is There Still Room for Innovation?

Psoriasis is a lifelong disease which requires treatment adherence for successful management. Considering the complexity of this pathology, the combination of active pharmaceutical ingredients with a synergistic mechanism of action can improve the safety and efficacy of the treatment with respect to the conventional monotherapy. Moreover, a fixed dose of therapeutic agents in a topical formulation offers the possibility to simplify administration, reduce the doses of each active ingredient, and improve patient's compliance. Among the first-line treatments in mild to moderate psoriasis, the formulation of calcipotriol (Cal) and betamethasone dipropionate (BD) in a single vehicle is challenging due to their chemical incompatibility in an aqueous environment and the formation of degradation products. Based on these considerations, this review aims to provide an overview on the biopharmaceutical properties of Cal/BD fixed-dose combination products available on the market (namely ointment, oleogel, foam, and O/W cream), highlighting also the novel approaches under evaluation. The main differences among topical formulations are discussed considering the different features of the anatomic districts involved in psoriasis and the patient's adherence. Moreover, since in vitro experiments are fundamental to evaluate the skin permeation profile during the development of an efficacious medicinal product, special emphasis is given to models proposed to mimic psoriatic lesions.

Design of Liposomal Lidocaine/Cannabidiol Fixed Combinations for Local Neuropathic Pain Treatment.

The administration of drug fixed combinations by nanocarriers is a new attractive approach since it can allow improvements in both the skin penetration of cargo compounds and their synergistic effects. The cutaneous administration of lidocaine (LD) and cannabidiol (CBD) combination can be useful for the local treatment of neuropathic pain. In fact, these drugs might exert a complementary effect on pain acting on sodium and calcium channels. In this study, the feasibility to deliver this combination in the deeper layers of the skin using deformable liposomes was studied. Based on a study of the drug affinity for lipid components performed by DSC, CBD was loaded in the lipid bilayer for limiting the leakage, while LD was loaded in the inner core by a pH gradient method (G-liposomes) or after previous encapsulation in micelle (DiMiL). The effect of the presence of Tween 80 in the liposome membrane was also evaluated. DiMiL increased both the skin permeation and the retention in the dermis of CBD and LD with respect to G-liposomes (R24dermis: 11.52 ± 2.4 against 4.51 ± 0.8 µg/cm2 for CBD; 19.6 ± 2.9 against 3.2 ± 0.1 µg/cm2 for LD). Moreover, both DiMiL and G-liposomes were more efficient than control formulations carrying free drugs in improving drug skin permeation. Interestingly, in the presence of a drug exerting a fluidizing effect such as CBD, the removal of Tween 80 from the composition led to an improved control of drug release and a higher extent of drug retention in the dermis layer.

Virucidal Activity of the Pyridobenzothiazolone Derivative HeE1-17Y against Enveloped RNA Viruses.

Pyridobenzothiazolone derivatives are a promising class of broad-spectrum antivirals. However, the mode of action of these compounds remains poorly understood. The HeE1-17Y derivative has already been shown to be a potent compound against a variety of flaviviruses of global relevance. In this work, the mode of action of HeE1-17Y has been studied for West Nile virus taking advantage of reporter replication particles (RRPs). Viral infectivity was drastically reduced by incubating the compound with the virus before infection, thus suggesting a direct interaction with the viral particles. Indeed, RRPs incubated with the inhibitor appeared to be severely compromised in electron microscopy analysis. HeE1-17Y is active against other enveloped viruses, including SARS-CoV-2, but not against two non-enveloped viruses, suggesting a virucidal mechanism that involves the alteration of the viral membrane.

Design and development of topical liposomal formulations in a regulatory perspective.

The skin is the absorption site for drug substances intended to treat loco-regional diseases, although its barrier properties limit the permeation of drug molecules. The growing knowledge of the skin structure and its physiology have supported the design of innovative nanosystems (e.g. liposomal systems) to improve the absorption of poorly skin-permeable drugs. However, despite the dozens of clinical trials started, few topically applied liposomal systems have been authorized both in the EU and the USA. Indeed, the intrinsic complexity of the topically applied liposomal systems, the higher production costs, the lack of standardized methods and the more stringent guidelines for assessing their benefit/risk balance can be seen as causes of such inefficient translation. The present work aimed to provide an overview of the physicochemical and biopharmaceutical characterization methods that can be applied to topical liposomal systems intended to be marketed as medicinal products, and the current regulatory provisions. The discussion highlights how such methodologies can be relevant for defining the critical quality attributes of the final product, and they can be usefully applied based on the phase of the life cycle of a liposomal product: to guide the formulation studies in the early stages of development, to rationally design preclinical and clinical trials, to support the pharmaceutical quality control system and to sustain post-marketing variations. The provided information can help define harmonized quality standards able to overcome the case-by-case approach currently applied by regulatory agencies in assessing the benefit/risk of the topically applied liposomal systems.

Rationalizing the Design of Hyaluronic Acid-Decorated Liposomes for Targeting Epidermal Layers: A Combination of Molecular Dynamics and Experimental Evidence.

This work provides information on the features of low molecular weight hyaluronic acid (HA)-decorated liposomes to target resveratrol (RSV) in the skin. Deformable liposomes were made of soy-phosphatidylcholine with Tween 80 as the fluidizing agent. For HA conjugation, three different phosphoethanolamines were tested: 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE), and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE). The different phosphoethanolamine-HA conjugates were inserted into the liposome bilayer by hydration (HA on both faces of the bilayer) or by the postinsertion method (HA only on the external face of the bilayer). The effect of these variables on deformability was experimentally assessed by an in-house method (K value, the lower the value, the higher the deformability) and molecular dynamics (MD) simulations. The results showed that the K values of HA-liposomes obtained by hydration were higher than the K values of HA-liposomes prepared by postinsertion, and both were at least 10-fold higher than the K values of the corresponding plain liposomes. The nature of the lipid anchor played a key role in deformability (DMPE > DOPE > DPPE) with high variability in the case of DOPE formulations. These data were justified by the trends found in silico for the bilayer bending modulus and the HA end-to-end distance. In addition to liposome flexibility, the HA extent seems to be the key factor governing the skin penetration of RSV. When the extent is higher, the amount of the drug retained in the skin is larger. Regarding skin permeation, a parabolic trend was recorded, and the optimal amount to favor skin permeation was an approximately 30 HA/phospholipid (µg/mmol) ratio. This study reports the first piece of evidence that it is possible to control drug delivery in the skin by tuning the amount of HA on the vesicle surface.

Design and development of plastic antibodies against SARS-CoV-2 RBD based on molecularly imprinted polymers that inhibit in vitro virus infection.

The present research study reports the development of plastic antibodies based on Molecularly Imprinted Polymers (MIPs) capable of selectively binding a portion of the novel coronavirus SARS-CoV-2 spike protein. Indeed, molecular imprinting represents a very promising and attractive technology for the synthesis of MIPs characterized by specific recognition abilities for a target molecule. Given these characteristics, MIPs can be considered tailor-made synthetic antibodies obtained by a templating process. After in silico analysis, imprinted nanoparticles were synthesized by inverse microemulsion polymerization and their ability to prevent the interaction between ACE2 and the receptor-binding domain of SARS-CoV-2 was investigated. Of relevance, the developed synthetic antibodies are capable of significantly inhibiting virus replication in Vero cell culture, suggesting their potential application in the treatment, prevention and diagnosis of SARS-CoV-2 infection.

Pre-Drawn Syringes of Comirnaty for an Efficient COVID-19 Mass Vaccination: Demonstration of Stability.

Moving towards a real mass vaccination in the context of COVID-19, healthcare professionals are required to face some criticisms due to limited data on the stability of a mRNA-based vaccine (Pfizer-BioNTech COVID-19 Vaccine in the US or Comirnaty in EU) as a dose in a 1 mL-syringe. The stability of the lipid nanoparticles and the encapsulated mRNA was evaluated in a "real-life" scenario. Specifically, we investigated the effects of different storing materials (e.g., syringes vs. glass vials), as well as of temperature and mechanical stress on nucleic acid integrity, number, and particle size distribution of lipid nanoparticles. After 5 h in the syringe, lipid nanoparticles maintained the regular round shape, and the hydrodynamic diameter ranged between 80 and 100 nm with a relatively narrow polydispersity (<0.2). Samples were stable independently of syringe materials and storage conditions. Only strong mechanical stress (e.g., shaking) caused massive aggregation of lipid nanoparticles and mRNA degradation. These proof-of-concept experiments support the hypothesis that vaccine doses can be safely prepared in a dedicated area using an aseptic technique and transferred without affecting their stability.

Extemporaneous printing of diclofenac orodispersible films for pediatrics.

OBJECTIVE: The possible application of a hot-melt ram extrusion printing to the preparation of diclofenac orodispersible films (ODF) made of maltodextrin was studied focusing the attention on the effects of taste-masking agents (i.e. namely mint, licorice-mint, and sucralose) and an opacifier (titanium dioxide [TiO2]). SIGNIFICANCE: This is a proof-of-concept of the feasibility to print ODF loaded with a thermosensitive drug substance by hot-melt technologies. METHODS: Diclofenac sodium (DNa) ODF made of maltodextrin (dextrose equivalent (DE) = 6 ) plasticized with glycerol were prepared by hot-melt extrusion printing. ODF were characterized for disintegration time, drug content, and solid state, in vitro dissolution in deionized water and simulated salivary fluid at pH 5.7, tensile, and adhesive properties. Moreover, the stability of ODF was assessed in accelerated conditions over six months. RESULTS: After the preparation, no variation in drug solid state was evident and the formation of impurity A of DNa was detected, even if it remained below the Pharmacopoeia (Ph. Eur.) limits (< 0.2%). Only the addition of DNa significantly improved the ODF tensile properties: the tensile strength increased from 0.17 ± 0.03 MPa (placebo ODF) to 2.21 ± 0.54 MPa (p ≤ 0.03). All ODF disintegrated in about 1 min, and the t80% was lower than 3 min. TiO2 reduced the static and dynamic peel forces (p ≤ 0.006) favoring the ODF detachment from the primary packaging material. During the accelerated stability study, ODF were easy to handle without fracture; the drug content, impurity A, and dissolution profiles remained superimposable. CONCLUSION: Hot-melt printing can be suitable to prepare palatable ODF loaded with bitter thermosensitive drugs.

Transplantation of autologous extracellular vesicles for cancer-specific targeting.

Nano- and microsized extracellular vesicles (EVs) are naturally occurring cargo-bearing packages of regulatory macromolecules, and recent studies are increasingly showing that EVs are responsible for physiological intercellular communication. Nanoparticles encapsulating anti-tumor theranostics represent an attractive "exosome-interfering" strategy for cancer therapy. Methods: Herein, by labeling plasma-derived EVs with indocyanine green (ICG) and following their biodistribution by in vivo and ex vivo imaging, we demonstrate the existence of nanoparticles with a highly selective cancer tropism in the blood of colorectal cancer (CRC) patients but not in that of healthy volunteers. Results: In CRC patient-derived xenograft (PDX) mouse models, we show that transplanted EVs recognize tumors from the cognate nanoparticle-generating individual, suggesting the theranostic potential of autologous EVs encapsulating tumor-interfering molecules. In large canine breeds bearing spontaneous malignant skin and breast tumors, the same autologous EV transplantation protocol shows comparable safety and efficacy profiles. Conclusions: Our data show the existence of an untapped resource of intercellular communication present in the blood of cancer patients, which represents an efficient and highly biocompatible way to deliver molecules directly to the tumor with great precision. The novel EV-interfering approach proposed by our study may become a new research direction in the complex interplay of modern personalized cancer therapy.

Topical Administration of Cannabidiol: Influence of Vehicle-Related Aspects on Skin Permeation Process.

Cannabidiol (CBD) is a non-psychoactive cannabinoid isolated from Cannabis sativa which, given its claimed beneficial properties and therapeutic potential, has lately aroused considerable attention from the scientific community. Starting from the little literature evidence, the main purpose of this study was to investigate the topical administration of CBD, with particular focus on the influence of vehicle-related aspects on the skin permeation process. This could provide useful information for the design of suitable drug delivery systems which could be used in developing topical medicines and cosmetics. In vitro human skin permeation studies were conducted using modified Franz diffusion cells to compare the performance of four solutions and two semisolid formulations. The Hildebrand solubility parameter was used to better understand the thermodynamic aspects implied in the partitioning process of the cannabinoid compound into the skin. It was interestingly found that a hydrophilic gel, mostly consisting of propylene glycol (79%, w/w), can be an optimal choice for the topical administration of CBD. Moreover, the feasibility of the preparation of CBD-loaded (trans)dermal patches, made with new printing technology, was also demonstrated.

Preserving the Integrity of Liposomes Prepared by Ethanol Injection upon Freeze-Drying: Insights from Combined Molecular Dynamics Simulations and Experimental Data.

The freeze-drying of complex formulations, such as liposomes, is challenging, particularly if dispersions contain residual organic solvents. This work aimed to investigate the effects of possible protectants, namely sucrose, trehalose and/or poly(vinyl pyrrolidone) (PVP), on the main features of the dried product using a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)-based liposomal dispersion prepared by ethanol injection and containing ethanol up to 6%, as a model. The interactions among vesicles and protectants were preliminary screened by Molecular Dynamics (MD) simulations, which have been proved useful in rationalizing the selection of protectant(s). The freeze-drying protocol was based on calorimetric results. Overall data suggested a stronger cryo-protectant effect of trehalose, compared with sucrose, due to stronger interactions with the DPPC bilayer and the formation of highly ordered clusters around the lipids. The effect further improved in the presence of PVP. Differently from the other tested protectants, the selected trehalose/PVP combination allows to preserve liposome size, even in the presence of 6% ethanol, as demonstrated by Nanoparticle Tracking Analysis (NTA). Nevertheless, it should be also underlined that cakes blew out at an ethanol concentration higher than 1% v/v, probably due to the poor cohesion within the cake and solvent vapour pressure upon sublimation.

Data on spray-drying processing to optimize the yield of materials sensitive to heat and moisture content.

Full dataset used to evaluate the spray-drying process parameters on the preparation of a micronized powder made of maltodextrin (MDX) is herein reported. The process parameters (namely, feed flow rate (FFR); inlet temperature (Tin); nozzle pressure (PN); noozle diameter (DN) and difference of pressure between cyclone and chamber (ΔP)) were screened through a Central Composite Design (25-1; 2∗5; nC=2) using the following responses: product yield, powder size and size dispersity (span) and the outlet temperature of the exhausted air (Tout). Data indicate that, in the considered range, only the product yield and the powder median diameter were influenced by the process. The product yield progressively increased on increasing inlet temperature and decreasing the amount or the size of droplets to be dried. The powder median diameter was positively influenced only by the nozzle diameter. This data presented in this article completes a wider work related on "Maltodextrins as drying auxiliary agent for the preparation of easily resuspendable nanoparticles" (Magri et al., 2019).

Glatiramer acetate: A complex drug beyond biologics.

Complex drugs may be either biological, if the active ingredients are derived from a biological source, or non-biological, if obtained by chemical synthesis. In both cases, their quality depends considerably on the manufacturing process. In the case of Non Biological Complex Drugs (NBCDs), complexity may arise either from the active substance, as in the case of glatiramer acetate, or from other sources, such as the formulation, as in the case of liposomes. In this paper, the case of glatiramer acetate (GA) - a NBCD relevant for clinical and economic reasons - is considered and the differences between US and EU regulatory approaches to GA marketing authorization are highlighted. Indeed, though US and EU regulatory agencies have chosen a generic approach integrated with additional data the implementation is different in the two jurisdictions. In the US, the additional data required are listed in a product specific guideline and copies of Copaxone® have been approved as generics. In the EU, instead regulatory agencies followed a hybrid approach requiring an additional comparative study, and interchangeability policies and substitution schemes have been left to national agencies.

In Vitro Anticancer Activity of Extracellular Vesicles (EVs) Secreted by Gingival Mesenchymal Stromal Cells Primed with Paclitaxel.

Interdental papilla are an interesting source of mesenchymal stromal cells (GinPaMSCs), which are easy to isolate and expand in vitro. In our laboratory, GinPaMSCs were isolated, expanded, and characterized by studying their secretome before and after priming with paclitaxel (PTX). The secretome of GinPaMSCs did not affect the growth of cancer cell lines tested in vitro, whereas the secretome of GinPaMSCs primed with paclitaxel (GinPaMSCs/PTX) exerted a significant anticancer effect. GinPaMSCs were able to uptake and then release paclitaxel in amounts pharmacologically effective against cancer cells, as demonstrated in vitro by the direct activity of GinPaMSCs/PTX and their secretome against both human pancreatic carcinoma and squamous carcinoma cells. PTX was associated with extracellular vesicles (EVs) secreted by cells (EVs/PTX), suggesting that PTX is incorporated into exosomes during their biogenesis. The isolation of mesenchymal stromal cells (MSCs) from gingiva is less invasive than that from other tissues (such as bone marrow and fat), and GinPaMSCs provide an optimal substrate for drug-priming to obtain EVs/PTX having anticancer activity. This research may contribute to develop new strategies of cell-mediated drug delivery by EVs that are easy to store without losing function, and could have a superior safety profile in therapy.

Drug-in-micelles-in-liposomes (DiMiL) systems as a novel approach to prevent drug leakage from deformable liposomes.

Deformable liposomes (DL) are successfully exploited to enhance the skin penetration of several compounds. Nevertheless, the "soft" nature of the bilayer favors the drug leakage, mainly in the case of hydrophobic compounds. This work aimed to develop a suitable strategy to stabilize the lipid bilayer, without compromising the deformability properties of DL. The approach relied on the design of a "matryoshka" system, namely a drug in micelles in deformable liposomes (DiMiL) system. The performances (drug leakage, deformability and in vitro skin penetration profile) of DiMiLs were tested using nifedipine and piroxicam as model compounds and compared to those of traditional DL. The micelles were made of Kolliphor HS15 whereas the lipid vesicles were composed of egg-phosphatidylcholine and Tween 80 (T80) at 95:5 or 85:15 w/w ratios. As expected, the drug leakage from DL was high after only one month of storage (almost 50% in the case of nifedipine and in the range of 39-79% in the case of piroxicam loaded DL, depending on T80 content). Optimized DiMiL formulations retained instead the drug content up to two-months storage period. Moreover, the constant of deformability of DiMiLs felt in the acceptance range for deformable vesicles intended for cutaneous application and the skin permeated amount of the delivered drugs was increased of at least 4 times. In conclusion, DiMiL reveals to be a suitable approach to avoid the leakage of hydrophobic compounds and an attractive transdermal drug delivery system for poorly permeable drugs.

Copies of nonbiological complex drugs: generic, hybrid or biosimilar?

The experience gained with biosimilars has made it clear that copies of complex drugs are more challenging to produce and put on the market than generics. In the case of so-called nonbiological complex drugs (NBCDs), the complexity can arise either from a complex active substance or by other factors, such as formulation or route of delivery. Regulatory policies in the USA and the EU for the marketing of NBCD copies are reviewed, using glatiramer acetate copies as a case study. In the USA, they are approved and marketed as generics (although needing additional data), and so they are interchangeable with the originator. In the EU, they are managed with a hybrid application, and their interchangeability and substitution are established by individual member states.