Tibio-femoral kinematics of the healthy knee joint throughout complete cycles of gait activities.

Accurate assessment of 3D tibio-femoral kinematics is essential for understanding knee joint functionality, but also provides a basis for assessing joint pathologies and the efficacy of musculoskeletal interventions. Until now, however, the assessment of functional kinematics in healthy knees has been mostly restricted to the loaded stance phase of gait, and level walking only, but the most critical conditions for the surrounding soft tissues are known to occur during high-flexion activities. This study aimed to determine the ranges of tibio-femoral rotation and condylar translation as well as provide evidence on the location of the centre of rotation during multiple complete cycles of different gait activities. Based on radiographic images captured using moving fluoroscopy in ten healthy subjects during multiple cycles of level walking, downhill walking and stair descent, 3D femoral and tibial poses were reconstructed to provide a comprehensive description of tibio-femoral kinematics. Despite a significant increase in joint flexion, the condylar antero-posterior range of motion remained comparable across all activities, with mean translations of 6.3-8.3 mm and 7.3-9.3 mm for the medial and lateral condyles respectively. Only the swing phase of level walking and stair descent exhibited a significantly greater range of motion for the lateral over the medial compartment. Although intra-subject variability was low, considerable differences in joint kinematics were observed between subjects. The observed subject-specific movement patterns indicate that accurate assessment of individual pre-operative kinematics together with individual implant selection and/or surgical implantation decisions might be necessary before further improvement to joint replacement outcome can be achieved.

Kinematic Evaluation of the GMK Sphere Implant During Gait Activities: A Dynamic Videofluoroscopy Study.

Joint stability is a primary concern in total knee joint replacement. The GMK Sphere prosthesis was specifically designed to provide medial compartment anterior-posterior (A-P) stability, while permitting rotational freedom of the joint through a flat lateral tibial surface. The objective of this study was to establish the changes in joint kinematics introduced by the GMK Sphere prosthesis during gait activities in comparison to conventional posterior-stabilized (PS) fixed-bearing and ultra-congruent (UC) mobile-bearing geometries. The A-P translation and internal/external rotation of three cohorts, each with 10 good outcome subjects (2.9 ± 1.6 years postop), with a GMK Sphere, GMK PS or GMK UC implant were analysed throughout complete cycles of gait activities using dynamic videofluoroscopy. The GMK Sphere showed the smallest range of medial compartment A-P translation for level walking, downhill walking, and stair descent (3.6 ± 0.9 mm, 3.1 ± 0.8 mm, 3.9 ± 1.3 mm), followed by the GMK UC (5.7 ± 1.0 mm, 8.0 ± 1.7 mm, 8.7 ± 1.9 mm) and the GMK PS (10.3 ± 2.2 mm, 10.1 ± 2.6 mm, 11.6 ± 1.6 mm) geometries. The GMK Sphere exhibited the largest range of lateral compartment A-P translation (12.1 ± 2.2 mm), and the largest range of tibial internal/external rotation (13.2 ± 2.2°), both during stair descent. This study has shown that the GMK Sphere clearly restricts A-P motion of the medial condyle during gait activities while still allowing a large range of axial rotation. The additional comparison against the conventional GMK PS and UC geometries, not only demonstrates that implant geometry is a key factor in governing tibio-femoral kinematics, but also that the geometry itself probably plays a more dominant role for joint movement than the type of gait activity. © 2019 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 37:2337-2347, 2019.

The position of the centre of the femoral head relative to the midline of the pelvis: a consistent landmark in total knee replacement surgery.

BACKGROUND: Femoro-tibial malalignment in excess of 3° is a recognised contributor of early mechanical failure in total knee replacement (TKR). Knowledge of the location of the centre of the femoral head is a pre-requisite to identification of the mechanical axis of the femur and can facilitate optimal component orientation. We investigated variation in the location of the centre of the femoral head relative to the midline of the pelvis. METHODS: We analysed the pelvic radiographs of 150 patients with unilateral total hip replacements. The perpendicular distance from the centre of the femoral head of the non-operated hip to the centre of pubic symphysis was measured. RESULTS: The mean distance from the centre of the femoral head to the pubic symphysis was 89.2mm (standard deviation, 5.7 mm). Patient height strongly correlated with this distance (r=0.53, p<0.01), as did the diameter of the femoral head (r=0.59, p<0.01). The latter was significantly larger in men than in women (50.9 mm vs. 44.5mm, p<0.01). CONCLUSION: The results demonstrate that the position of the centre of the femoral head has very little variability, irrespective of patient age or body-mass index. If the gender-specific mean femoral head to midline distance is used to estimate the location of the femoral head centre, a line from this point to the centre of the femoral condyles will deviate from the true mechanical axis by no more than 1.5°, in 98% of cases.

The effect on wear of lift-off in total knee arthroplasty.

Femoral lift-off has been reported in total knee arthroplasty using dynamic fluoroscopic analysis. However, the effect of femoral lift-off on ultra-high-molecular-weight polyethylene (UHMWPE) is not clear. The objective of this study was to evaluate the effect of lift-off movement on the wear of UHMWPE using a pin-on-disc testing machine. Using oxidised UHMWPE, delamination was observed in 70% of the discs with lift-off movement, as against none in without lift-off movement (p=0.0603). In non-oxidised UHMWPE the depth of the wear track was increased in the impact area after lift-off, but there was no delamination and no increase in wear as measured by weight loss. UHMWPE can sustain the impact of after lift-off with neither delamination nor wear by other mechanisms. In contrast, degraded (i.e., oxidised) UHMWPE undergoes delamination after lift-off. Since it is probable that lift-off cannot be prevented, oxidised UHMWPE should never be used in TKA.

O suprimento sanguíneo da cabeça femoral artrósica: um estudo comparativo / The blood supply to the osteoarthritic femoral head: a comparative study

O suprimento sanguíneo à parte proximal do fêmur foi medido em dois grupos de pacientes. Foi usado um método que utiliza hemácias marcadas in vivo pelo tecnécio 99m. Doze pacientes submetidos à substituição total do quadril por artrose primária constituíram o grupo osteoartrósico (OA). O grupo controle foi formado por 11 pacientes sem artrose do quadril, operados por fraturas transtrocanterianas ou subtrocanterianas produzidas por impactos de baixa energia, sabidamente inócuas à irrigação da cabeça femoral. Os pacientes dos dois grupos pertenciam à mesma faixa etária. O suprimento sanguíneo da cabeça femoral, expresso por um quociente de atividade, não mostrou diferença significante entre os grupos OA e controle quando comparados por um modelo que levou em conta efeitos aleatórios individuais. Relevância clínica: ao programar o tratamento cirúrgico de um quadril artrósico, a cabeça femoral não deve ser considerada isquêmica.