Resistance of plastic ophthalmic lenses: the effect of base curve on different materials during static load testing.

PURPOSE: This study was designated to evaluate, through a static load test, the influence of lens base curve on the fracture resistance of three common plastic materials. METHODS: A JJ Lloyd load cell machine was used to test the fracture resistance of -4.00 D spherical lenses. The samples had a nominal center thickness of 2.0 mm and a base curve distributed in one of five groups (+0.50, +2.50, +4.50, +6.50, and +8.50 D). The lenses were manufactured in CR39, polycarbonate, and TL16, a high refractive index plastic (n = 1.599). RESULTS: The lens base curve influenced fracture resistance for all materials. For these materials, resistance increased as the base curve varied from +0.50 to +8.50 D. The resistance of CR39, TL16, and polycarbonate lenses was found to be linearly dependent on lens base curve. The effect is stronger for polycarbonate. Fracture resistance was higher for TL16 than for CR39, and polycarbonate was much more resistant to breakage than the two other materials. CONCLUSIONS: For a given power, the fracture resistance of an ophthalmic lens is reduced when its base curve has a low value. Consequently, the flattening of ophthalmic lenses for cosmetic purposes is not recommended as far as fracture resistance is concerned.

Visual dysfunction among former microelectronics assembly workers.

Although known neurotoxins with potential ophthalmotoxic properties are commonly used in microelectronics assembly, there has been no systematic study of visual disturbances among past or present workers in this industry. The objective of the present study was to compare visual functions, using a matched-pair design, between former workers from a microelectronics plant and a local reference population. From an initial population of 180 former workers and 157 potential referents, 54 pairs were matched for age (+/- 3 y), education (+/- 2 y), sex, ethnic origin, and number of children. Near and far visual acuity, chromatic discrimination, and near contrast sensitivity were assessed monocularly. Paired comparisons (Signed-rank Wilcoxon test) revealed that the former microelectronics workers had significantly lower contrast sensitivity, particularly in the intermediate frequencies, independently of near visual acuity loss. There were no differences for far visual acuity in both eyes. Even though near visual acuity and color vision were compromised among the former workers, the differences were only significant for one eye, as was the prevalence of acquired dyschromatopsia (chi-square for matched pairs, p less than .001). These findings suggest a pattern of contrast sensitivity deficits consistent with impairment to foveal and/or neuro-optic pathways among these former microelectronics workers. Exposure to ophthalmotoxic chemicals is proposed as the most probable risk factor.

Contrast-sensitivity loss in a group of former microelectronics workers with normal visual acuity.

The measurement of contrast sensitivity at varying grating frequencies is used increasingly to study visual and neural disorders. It provides more information than conventional acuity measures. Refractive errors initially affect high spatial frequencies, whereas lower spatial frequencies are affected only when these errors are pronounced. Neurophysiological alterations are reflected by depressed sensitivity to coarse gratings. Visual dysfunction has been associated with workplace exposures to a wide range of organic solvents. In microelectronics assembly where large quantities of organic solvents are used in many aspects of the work processes, visual deficits have been observed. The objective of the present study was to compare contrast sensitivity among former microelectronics assembly workers, with normal far and near visual acuity, and a reference group from the same region, with similar acuity. No significant differences were observed between scores at the two ends of the contrast sensitivity curves; however, at the intermediate spatial frequencies, the former microelectronics workers' scores were significantly lower (Student's t-test; p less than 0.05). For the microelectronics workers, no relation was observed between age and contrast sensitivity at any spatial frequency, whereas for the reference group, contrast sensitivity scores were progressively lower with age at spatial frequencies greater than or equal to 6.0 cpd (r2 = 0.15 at 6 cpd to r2 = 0.45 at 18.0 cpd), suggesting that for the former there is some form of interference with the expected contrast sensitivity loss with age. Lower contrast sensitivity scores in intermediate spatial frequencies, observed among the former microelectronics workers, possibly reflect neural alterations, which may have resulted from exposure to neurotoxic substances. These findings suggest the need for further studies on visual functions in microelectronics workers.

Measurement precision of a portable instrument to assess vibrotactile perception threshold.

The objective of the present study was to evaluate the reliability of a modified version of the commercially available Biothesiometer, and to examine vibrotactile perception thresholds with respect to age and gender. A standardized protocol for measuring vibrotactile perception threshold was administered to 80 subjects, once a week over 4 weeks. Inter-session variability was stable (analysis of variance for repeated measures; P greater than 0.05) and correlations were high (Pearson's: 0.87 less than or equal to r less than or equal to 0.90; P less than or equal to 0.001). For sites on both hands and feet, there was a significant increase with age (0.19 less than or equal to r2 less than or equal to 0.52; P less than or equal to 0.001). Five factor analysis of variance model showed that vibrotactile perception threshold was significantly different with stimulus site, age category and gender; no differences were observed with alcohol consumption or smoking status. The findings indicate that the measurements from this device are highly reproducible and sensitive to expected threshold differences with age and gender. The authors attribute this to technical improvements of the original apparatus, rigid adherence to test protocol and maintenance of standard conditions. This type of instrument would be useful in assessing vibrotactile perception loss in occupational health studies.