Design and Effects of the Cinnamic Acids Chemical Structures as Organocatalyst on the Polymerization of Benzoxazines.

This study focuses on the catalytic effect of the two geometric isomers of a cinnamic acid derivative, E and Z-forms of 3-methoxycinnamic acid (3OMeCA), analyzing the influence of their chemical structures. E and Z-3OMeCA isomers show very good catalytic effect in the polymerization of benzoxazines, decreasing by 40 and 55 °C, respectively, the polymerization temperatures, for catalyst contents of up to 10% w/w. Isothermal polymerizations show that polymerizations are easily realized and analyzed at temperatures as low as 130 °C and at much shorter times using Z-3OMeCA instead of E-3OMeCA. Thus, both cinnamic acids are good catalysts, with Z-3OMeCA being better. The molecular reasons for this difference and mechanistic implications in benzoxazine polymerizations are also presented.

Developing Further Versatility in Benzoxazine Synthesis via Hydrolytic Ring-Opening.

In this study, 2-(aminomethyl)phenol and its derivatives, the reactants for 2-substituted 1,3-benzoxazines, are synthesized by HCl hydrolysis from the typical benzoxazines. The phenol/aniline-based mono-oxazine benzoxazine, PH-a, and the bisphenol A/aniline-based bis-oxazine benzoxazine, BA-a, are used as examples to demonstrate the feasibility of this new approach. Their chemical structures are characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) and Raman spectroscopies, and are further verified by elementary analysis. Their thermal properties are studied by differential scanning calorimetry (DSC). These two 2-(aminomethyl) phenolic derivatives are reacted with paraformaldehyde to close the oxazine rings. A benzoxazine with a phenyl substituent at the 2-position of the oxazine ring is obtained from the 2-((phenylamino)methyl)phenol (hPH-a) and benzaldehyde. All these results highlight the success of the HCl hydrolysis and the formation of stable intermediates, namely 2-(aminomethyl) phenolic derivatives, from readily available benzoxazine monomers. This further demonstrates the feasibility of using these intermediates as reactants for a novel benzoxazine synthesis.

Development of Hydrogen-Rich Benzoxazine Resins with Low Polymerization Temperature for Space Radiation Shielding.

A systematic study has been carried out to develop a material with significant protection properties from galactic cosmic radiation and solar energetic particles. The research focused on the development of hydrogen-rich benzoxazines, which are particularly effective for shielding against such radiation. Newly developed benzoxazine resin can be polymerized at 120 °C, which meets the low-temperature processing requirements for use with ultrahigh molecular weight polyethylene (UHMWPE) fiber, a hydrogen-rich composite reinforcement. This highly reactive benzoxazine resin also exhibits low viscosity and good shelf-life. The structure of the benzoxazine monomer is confirmed by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy. Polymerization behavior and thermal properties are evaluated by differential scanning calorimetry and thermogravimetric analysis. Dynamic mechanical analysis is used to study chemorheological properties of the benzoxazine monomer, rheological properties of the cross-linked polybenzoxazine, and rheological properties of UHMWPE-reinforced polybenzoxazine composites. The theoretical radiation shielding capability of the composite is also evaluated using computer-based simulations.

Smart, Sustainable, and Ecofriendly Chemical Design of Fully Bio-Based Thermally Stable Thermosets Based on Benzoxazine Chemistry.

A smart synthetic chemical design incorporating furfurylamine, a natural renewable amine, into a partially bio-based coumarin-containing benzoxazine is presented. The versatility of the synthetic approach is shown to be flexible and robust enough to be successful under more ecofriendly reaction conditions by replacing toluene with ethanol as the reaction solvent and even under solventless conditions. The chemical structure of this coumarin-furfurylamine-containing benzoxazine is characterized by FTIR, (1) H NMR spectroscopy and two-dimensional (1) H-(1) H nuclear Overhauser effect spectroscopy (2D (1) H-(1) H NOESY). The thermal properties of the resin toward polymerization are characterized by differential scanning calorimetry (DSC) and the thermal stability of the resulting polymers by thermogravimetric analysis (TGA). The results reveal that the furanic moiety induces a co-operative activating effect, thus lowering the polymerization temperature and also contributes to a better thermal stability of the resulting polymers. These results, in addition to those of natural renewable benzoxazine resins reviewed herein, highlight the positive and beneficial implication of designing novel bio-based polybenzoxazine and possibly other thermosets with desirable and competitive properties.

Intramolecular Hydrogen Bonding in Benzoxazines: When Structural Design Becomes Functional.

The future evolution of benzoxazines and polybenzoxazines as advanced molecular, structural, functional, engineering, and newly commercial materials depends to a great extent on a deeper and more fundamental understanding at the molecular level. In this contribution, the field of benzoxazines is briefly introduced along with a more detailed review of ortho-amide-functional benzoxazines, which are the main subjects of this article. Provided in this article are the detailed and solid scientific evidences of intramolecular five-membered-ring hydrogen bonding, which is supposed to be responsible for the unique and characteristic features exhibited by this ever-growing family of ortho-functionalized benzoxazines. One-dimensional (1D) (1)H NMR spectroscopy was used to study various concentrations of benzoxazines in various solvents with different hydrogen-bonding capability and at various temperatures to investigate in detail the nature of hydrogen bonding in both ortho-amide-functionalized benzoxazine and its para counterpart. These materials were further investigated by two-dimensional (2D) (1)H-(1)H nuclear Overhauser effect spectroscopy (NOESY) to verify and support the conclusions derived during the 1D (1)H NMR experiments. Only highly purified single-crystal benzoxazine samples have been used for this study to avoid additional interactions caused by any impurities.

Design, synthesis, and miniemulsion polymerization of new phosphonate surfmers and application studies of the resulting nanoparticles as model systems for biomimetic mineralization and cellular uptake.

Heterophase polymerizations have gained increasing attention in the past decades, especially as the decoration and functionalization of the particle surface for further applications gets more and more into focus. One promising approach for the functionalization exclusively on the particle surface is the use of surfmers (surfactant and monomer). Herein, we present the synthesis of a new family of surfmers and their use for decorating nanoparticles with phosphonate groups through miniemulsion polymerization. Furthermore the synthesis of a dye-labeled functional surfmer provided an elegant manner to evaluate and get deeper insights about its copolymerization. Additionally, potential applications of the synthesized particles in biological studies as well as their use as template for biomimetic mineralization are presented.

Photoreactive nanoparticles as nanometric building blocks for the generation of self-healing hydrogel thin films.

The use of reversible photo-cross-linkable nanoparticles as nano building blocks for the formulation of nanostructured self-healing thin hydrogel films is shown for the first time. This strategy for the fabrication of autonomous self-healing coatings consisted of various microgels bearing surface cinnamate moieties. The nanoparticles were formed by miniemulsion copolymerization, which was followed by surface functionalization with the cinnamate groups. These nanoparticles were then used to form films by drop-casting, followed by interparticle photo-cross-linking polymerization through the light-induced forward dimerization reaction of the previously incorporated cinnamate groups. The reversibility of this macroscopic network formation was also demonstrated by photoinducing the backward dimerization reaction and carrying out several cycles of photoinduced cross-linking and de-cross-linking. The self-healing ability through swelling of these films following surface damage was also demonstrated. Finally, the ability of these self-healing macroscopic films to incorporate additives of different chemical nature before photo-cross-linking was evaluated.

Towards the generation of self-healing materials by means of a reversible photo-induced approach.

Photo-induced reversibility as a tool for self-healing: a reversible photo-induced dendritic macromonomer was synthesized and proven to form networks with different features depending on the crosslinking conditions. While networks formed from aqueous systems exhibited a reversible change in their crosslinking degree, networks generated in bulk underwent fully reversibility. The latter was then exploited for generating self-healing materials by means of a photo-induced treatment.

Determination of the Förster distance in polymer films by fluorescence decay for donor dyes with a nonexponential decay profile.

Fluorescence resonance energy transfer (FRET) experiments were carried out on three pairs of donor-acceptor dyes in polymer films in which the donor dyes had absorption maxima in the range of 350-450 nm. Two of the donors, a coumarin dye and a naphthalimide dye covalently bound to polystyrene, gave nonexponential decays in the absence of acceptors. The decay profiles could be fitted to a stretched exponential form with a beta value on the order of 0.9. We developed equations for analyzing donor fluorescence intensity decay profiles for donor-acceptor mixtures in rigid matrices for the case of donors showing relatively small deviations from exponentiality. To test these equations, we calculate values of the Förster radius (R0(FR)) from the decay profile data and compare these values to the Förster radius R0(SO) determined by the traditional spectral overlap method. Agreement between these values validates the methodology developed here for the use of such donor dyes in FRET studies of more complex polymer systems.

Nanoscale co-organization of quantum dots and conjugated polymers using polymeric micelles as templates.

Hierarchical organization of light-absorbing molecules is integral to natural light harvesting complexes and has been mimicked by elegant chemical systems. A challenge is to attain such spatial organization among nanoscale systems. Interactions between nanoscale systems, e.g., conjugated polymers, carbon nanotubes, quantum dots, and so on, are of interest for basic and applied reasons. However, typically the excited-state interactions and dynamics are examined in rather complex blends, such as cast films. A model system with complexity intermediate between a film and a supramolecular system would yield helpful insights into electronic energy and charge transfer. Here, we report a simple and versatile approach to achieving spatially defined organization of colloidal CdSe, CdSe/ZnS core/shell, or PbS nanocrystals (quantum dots) with poly(3-hexylthiophenes) (P3HTs) using micelles of poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) as the main structural motif. We compare the characteristics of this system to those of natural light-harvesting complexes. Bulk heterojunction films (and related systems) are characterized by electronic interactions, and therefore dynamics of charge and energy transfer, at interfaces rather than between specific donor-acceptor molecules. Owing to structural disorder, such systems are inherently complex. Therefore, we expect that the spatially defined organization of the active components in the present system provides new opportunities for studying the complicated photophysics intrinsic to blends of nanoscale systems, such as bulk heterojunctions by establishing simplified and better controlled interfaces.