The role of limb alignment on natural tibiofemoral kinematics and kinetics.

Aims: This study aimed to analyze kinematics and kinetics of the tibiofemoral joint in healthy subjects with valgus, neutral, and varus limb alignment throughout multiple gait activities using dynamic videofluoroscopy. Methods: Five subjects with valgus, 12 with neutral, and ten with varus limb alignment were assessed during multiple complete cycles of level walking, downhill walking, and stair descent using a combination of dynamic videofluoroscopy, ground reaction force plates, and optical motion capture. Following 2D/3D registration, tibiofemoral kinematics and kinetics were compared between the three limb alignment groups. Results: No significant differences for the rotational or translational patterns between the different limb alignment groups were found for level walking, downhill walking, or stair descent. Neutral and varus aligned subjects showed a mean centre of rotation located on the medial condyle for the loaded stance phase of all three gait activities. Valgus alignment, however, resulted in a centrally located centre of rotation for level and downhill walking, but a more medial centre of rotation during stair descent. Knee adduction/abduction moments were significantly influenced by limb alignment, with an increasing knee adduction moment from valgus through neutral to varus. Conclusion: Limb alignment was not reflected in the condylar kinematics, but did significantly affect the knee adduction moment. Variations in frontal plane limb alignment seem not to be a main modulator of condylar kinematics. The presented data provide insights into the influence of anatomical parameters on tibiofemoral kinematics and kinetics towards enhancing clinical decision-making and surgical restoration of natural knee joint motion and loading.

Greater hip internal rotation range of motion is associated with increased dynamic knee valgus during jump landing, both before and after fatigue.

PURPOSE: The aim of this study was to analyse sex-specific differences contributing to dynamic valgus in competitive soccer players before and after a standardised fatiguing protocol. METHODS: Thirty-nine healthy female and male competitive soccer players (19 females and 20 males) were recruited for the purpose of this study. Bilateral medial knee displacement (MKD) was assessed during drop jump landings using a three-dimensional motion capture system before and after a standardised fatiguing protocol. In addition, all soccer players underwent clinical examinations, including rotational hip range of motion (ROM), isokinetic strength testing and magnetic resonance imaging (MRI) of the hip and knee. Sex-specific and fatigue-dependent differences were reported, and the influence of demographic, clinical and radiographic factors on MKD was analysed via multiple linear regression models. RESULTS: Compared with male soccer players, female soccer players demonstrated a tendency towards increased MKD during drop jump landings before (p = 0.09) and after the fatiguing protocol (p = 0.04). Sex-specific differences included increased hip internal rotation (IR) ROM, decreased hip external rotation (ER) strength and increased femoral torsion in females (all p < 0.002). According to the multiple linear regression models (stepwise method), increased hip IR ROM (90° of flexion) and the non-dominant leg remained the sole independent predictors of increased MKD during drop jump landings before (p < 0.01 and p = 0.02, respectively) and after fatigue (p < 0.01 and p < 0.01, respectively). An increase in hip IR ROM in females was linearly related to MKD after fatigue (R2 = 0.25; p < 0.01). CONCLUSION: Female soccer players exhibited increased dynamic valgus before and after fatigue, which is likely attributed to joint mobility, as well as muscular and anatomical differences, such as increased hip IR ROM, reduced hip ER strength and increased femoral torsion. In particular, females with increased hip IR ROM were more susceptible to effects of fatigue on MKD, which may increase their risk for anterior cruciate ligament injury. LEVEL OF EVIDENCE: Level III.

Dome versus single-cut osteotomies for correction of long bone deformities-technical considerations.

Corrective osteotomy allows to improve joint loading, pain and function. In complex deformities, the biggest challenge is to define the optimal surgical solution, while considering anatomical, technical and biomechanical factors. While the single-cut osteotomy (SCOT) and focal dome osteotomy (FDO) are well-established treatment options, their mathematical relationship remain largely unclear. The aim of the study was (1) to describe the close mathematical relationship between the SCOT and FDO and (2) to analyze and introduce a novel technique-the stepped FDO-as a modification of the classic FDO. The mathematical background and relationship of SCOT and FDO are described for the example of a femoral deformity correction and visualized using a 3D surface model taking into account the benefits for the clinical application. The novel modifications of the stepped FDO are introduced and its technical and clinical feasibility demonstrated. Both, SCOT and FDO, rely on the same deformity axis that defines the rotation axis k for a 3D deformity correction. To achieve the desired correction using a SCOT, the resulting cutting plane is perpendicular to k, while using a FDO will result in a cylindrical cut with a central axis parallel to k. The SCOT and FDO demonstrate a strong mathematical relation, as both methods rely on the same deformity axis, however, resulting in different cutting planes. These characteristics enable a complementary use when defining the optimal type of osteotomy. This understanding enables a more versatile planning approach when considering factors as the surgical approach, biomechanical characteristics of fixation or soft tissue conditions. The newly introduced stepped FDO facilitates an exact reduction of the bone fragments and potentially expands the clinical applicability of the FDO.

Trochlear Dysplasia Is Associated With Increased Sagittal Tibial Tubercle Trochlear-Groove Distance in Patients With Patellar Instability.

PURPOSE: To compare the sagittal position of the tibial tubercle in relation the trochlea groove in patients with and without trochlear dysplasia (TD). Patients with high-grade TD show a significantly increased sagittal position of the tibial tubercle in relation to the trochlear groove (sTTTG) compared with patients without TD. This may affect patellofemoral loading and contribute to the increased prevalence of cartilage lesions seen in the patellofemoral joint of patients with dysplasia of the trochlear groove. METHODS: All patients between January 2017 and December 2020 with high-grade TD (Dejour type B, C, and D) who underwent patellar-stabilizing surgery for patellar instability at a single institution were included in the current study. Patients without preoperative magnetic resonance imaging (MRI), any previous osteotomy on the affected lower extremity, or cruciate ligament insufficiency were excluded. Patients who underwent knee arthroscopy for meniscal repair/debridement without any signs of TD or any of the aforementioned criteria served as the control group. Preoperative MRI was retrospectively assessed to compare common patellofemoral anatomic parameters including patellar angle, patellar tilt, patella morphology according to Wiberg, Caton-Deschamps index, PF index, trochlear sulcus angle, sulcus depth, lateral inclination angle of the trochlea, tibiofemoral rotation, TTTG, and sTTTG distance between both groups. The sTTTG is measured as the distance between the nadir point of the cartilaginous trochlear groove and the most anterior point of the tibial tubercle on an axial MRI. Independent predictors for the sTTTG were assessed for patients with TD. RESULTS: Patients with high-grade TD (n = 82) showed an increased patellar tilt, Caton-Deschamps index, trochlear sulcus angle, lateral tibiofemoral rotation angle, TTTG, and sTTTG (9.16 ± 4.47 mm vs 2.66 ± 4.21 mm) compared with the control group (n = 83) (P < .001). Patellar angle, PF index, sulcus depth, and lateral inclination angle of the trochlear were significantly decreased in the TD group (P < .001). The sTTTG was similar in all TD groups (n.s.). Among patients with TD, both tibiofemoral rotation and patellar height were independent predictors of the sTTTG (P < .05). CONCLUSIONS: Patients with high-grade TD show not only abnormal values in common patellofemoral instability risk factors but also a significantly increased sTTTG compared with patients without TD. LEVEL OF EVIDENCE: Level III, retrospective case comparative study.

No significant change of tibiofemoral rotation after femoral rotational osteotomy in patients with patellofemoral instability.

PURPOSE: An increased value of tibiofemoral rotation is frequently observed in patients with patellofemoral instability or maltracking. Nevertheless, the appropriate approach for addressing this parameter remains unclear so far. One potential approach for correcting tibiofemoral rotation is femoral rotational osteotomy. We hypothesized that femoral rotational osteotomy affects tibiofemoral rotation. METHODS: All patients who underwent femoral rotational osteotomy between January 2018 and May 2022 were included in this study. Pre- and postoperative tibiofemoral rotation and the degree of femoral rotation were measured using two-dimensional (2D) and three-dimensional (3D) measurements. The effect of femoral rotation on tibiofemoral rotation was assessed. RESULTS: Forty knees (18 right and 22 left) of 36 patients (28 females and 8 males) were included. Mean preoperative femoral torsion was 32.1 ± 10.1° in 2D and 30.8 ± 10.1° in 3D. Femoral rotation was performed by -14.1 ± 8.3° using 2D measurements and -15.0 ± 8.0° using 3D measurements. Tibiofemoral rotation changed from 9.9 ± 6.2° to 9.7 ± 6.0° (p = n.s.) in 2D, and from 10.2 ± 5.5° to 9.4 ± 5.4° (p = n.s.) in 3D. CONCLUSION: Tibiofemoral rotation showed no significant changes after femoral rotational osteotomy. Hence, femoral rotational osteotomy cannot be used to correct tibiofemoral rotation in addition to correcting the femoral version. Other surgical techniques need to be evaluated if correction of tibiofemoral rotation is required. LEVEL OF EVIDENCE: Level III.

Validation of a Three-Dimensional Weight-Bearing Measurement Protocol for Medial Open-Wedge High Tibial Osteotomy.

Three-dimensional (3D) deformity assessment and leg realignment planning is emerging. The aim of this study was to (1) validate a novel 3D planning modality that incorporates the weight-bearing (WB) state (3D WB) by comparing it to existing modalities (3D non-weight-bearing (NWB), 2D WB) and (2) evaluate the influence of the modality (2D vs. 3D) and the WB condition on the measurements. Three different planning and deformity measurement protocols were analyzed in 19 legs that underwent medial open-wedge high tibial osteotomy (HTO): (1) a 3D WB protocol, after 2D/3D registration of 3D CT models onto the long-leg radiograph (LLR) (3D WB), (2) a 3D NWB protocol based on the 3D surface models obtained in the supine position (3D NWB), and (3) a 2D WB protocol based on the LLR (2D WB). The hip-knee-ankle angle (HKA), joint line convergence angle (JLCA), and the achieved surgical correction were measured for each modality and patient. All the measurement protocols demonstrated excellent intermodal agreement for the achieved surgical correction, with an ICC of 0.90 (95% CI: 0.76-0.96)) (p < 0.001). Surgical correction had a higher mean absolute difference compared to the 3D opening angle (OA) when measured with the WB protocols (3D WB: 2.7 ± 1.8°, 3D NWB: 1.9 ± 1.3°, 2D WB: 2.2 ± 1.3°), but it did not show statistical significance. The novel planning modality (3D WB) demonstrated excellent agreement when measuring the surgical correction after HTO compared to existing modalities.

Deep-learning based 3D reconstruction of lower limb bones from biplanar radiographs for preoperative osteotomy planning.

PURPOSE: Three-dimensional (3D) preoperative planning has become the gold standard for orthopedic surgeries, primarily relying on CT-reconstructed 3D models. However, in contrast to standing radiographs, a CT scan is not part of the standard protocol but is usually acquired for preoperative planning purposes only. Additionally, it is costly, exposes the patients to high doses of radiation and is acquired in a non-weight-bearing position. METHODS: In this study, we develop a deep-learning based pipeline to facilitate 3D preoperative planning for high tibial osteotomies, based on 3D models reconstructed from low-dose biplanar standing EOS radiographs. Using digitally reconstructed radiographs, we train networks to localize the clinically required landmarks, separate the two legs in the sagittal radiograph and finally reconstruct the 3D bone model. Finally, we evaluate the accuracy of the reconstructed 3D models for the particular application case of preoperative planning, with the aim of eliminating the need for a CT scan in specific cases, such as high tibial osteotomies. RESULTS: The mean Dice coefficients for the tibial reconstructions were 0.92 and 0.89 for the right and left tibia, respectively. The reconstructed models were successfully used for clinical-grade preoperative planning in a real patient series of 52 cases. The mean differences to ground truth values for mechanical axis and tibial slope were 0.52° and 4.33°, respectively. CONCLUSIONS: We contribute a novel framework for the 2D-3D reconstruction of bone models from biplanar standing EOS radiographs and successfully use them in automated clinical-grade preoperative planning of high tibial osteotomies. However, achieving precise reconstruction and automated measurement of tibial slope remains a significant challenge.

The coronal alignment differs between two-dimensional weight-bearing and three-dimensional nonweight bearing planning in total knee arthroplasty.

Purpose: The goal of this study is (1) to assess differences between two-dimensional (2D) weight-bearing (WB) and three-dimensional (3D) nonweight-bearing (NWB) planning in total knee arthroplasty (TKA) and (2) to identify factors that influence intermodal differences. Methods: Retrospective single-centre analysis of patients planned for a TKA with patient-specific instruments (PSI). Preoperative WB long-leg radiographs and NWB computed tomography were analysed and following radiographic parameters included: hip-knee-ankle angle (HKA) (+varus/-valgus), joint line convergence angle (JLCA), femorotibial subluxation and bony defect classified according to Anderson. Preoperative range of motion was also considered as possible covariate. Demographic factors included age, sex, and body mass index. Results: A total of 352 knees of 323 patients (66% females) with a mean age of 66 ± 9.7 years were analysed. The HKA differed significantly between 2D and 3D planning modalities; varus knees (n = 231): 9.9° ± 5.1° vs. 6.7° ± 4°, p < 0.001; valgus knees (n = 121): -8.2° ± 6° vs. -5.5° ± 4.4°, p < 0.001. In varus knees, HKA (ß = 0.38; p < 0.0001) and JLCA (ß = 0.14; p = 0.03) were associated with increasing difference between 2D/3D HKA. For valgus knees, HKA (ß = -0.6; p < 0.0001), JLCA (ß = -0.3; p = 0.0001) and lateral distal femoral angle (ß = -0.28; p = 0.03) showed a significant influence on the mean absolute difference. Conclusion: The coronal alignment in preoperative 3D model for PSI-TKA significantly differed from 2D WB state and the difference between modalities correlated with the extent of varus/valgus deformity. In the vast majority of cases, the 3D NWB approach significantly underestimated the preoperative deformity, which needs to be considered to achieve the planned correction when using PSI in TKA. Level of Evidence: Level III.

Increased tibial tuberosity torsion has the greatest predictive value in patients with patellofemoral instability compared to other commonly assessed parameters.

PURPOSE: The multifactorial nature of patellofemoral instability requires a comprehensive assessment of the affected patients. While an association between tibial tuberosity (TT) torsion and patellofemoral instability is known, its specific effect has not yet been investigated. This study investigated the effect of TT torsion on patellofemoral instability. METHODS: This retrospective cohort study compared patients who underwent surgical intervention for patellofemoral instability and asymptomatic controls. TT torsion was measured in addition to other commonly assessed risk factors for patellofemoral instability using standardised computed tomography (CT) data of the lower extremities. The diagnostic performances of the assessed parameters were evaluated using receiver operating characteristic curve analysis and odds ratios (ORs) were calculated. RESULTS: The patellofemoral instability group consisted of 79 knees, compared to 72 knees in the asymptomatic control group. Both groups differed significantly in all assessed parameters (p < 0.001), except for tibial torsion (n.s.). Among all parameters, TT torsion presented the best diagnostic performance for predicting patellar instability with an area under the curve of 0.95 (95% confidence interval [CI], 0.91-0.98; p < 0.001). A cut-off value of 17.7° yielded a 0.87 sensitivity and 0.89 specificity to predict patellar instability (OR, 55.2; 95% CI, 20.5-148.6; p < 0.001). CONCLUSION: Among the evaluated risk factors, TT torsion had the highest predictive value for patellofemoral instability. Patients with TT torsions ≥ 17.7° showed a 55-fold increased probability of patellofemoral instability. Therefore, TT torsion should be included in the assessment of patients with patellofemoral instability. LEVEL OF EVIDENCE: Level III.

The influence of the weight-bearing state on three-dimensional (3D) planning in lower extremity realignment - analysis of novel vs. state-of-the-art planning approaches.

BACKGROUND: The use of 3D planning to guide corrective osteotomies of the lower extremity is increasing in clinical practice. The use of computer-tomography (CT) data acquired in supine position neglects the weight-bearing (WB) state and the gold standard in 3D planning involves the manual adaption of the surgical plan after considering the WB state in long-leg radiographs (LLR). However, this process is subjective and dependent on the surgeons experience. A more standardized and automated method could reduce variability and decrease costs. PURPOSE: The aim of the study was (1) to compare three different three-dimensional (3D) planning modalities for medial open-wedge high tibial osteotomy (MOWHTO) and (2) to describe the current practice of adapting NWB CT data after considering the WB state in LLR. The purpose of this study is to validate a new, standardized approach to include the WB state into the 3D planning and to compare this method against the current gold standard of 3D planning. Our hypothesis is that the correction is comparable to the gold standard, but shows less variability due compared to the more subjective hybrid approach. METHODS: Three surgical planning modalities were retrospectively analyzed in 43 legs scheduled for MOWHTO between 2015 and 2019. The planning modalities included: (1) 3D hybrid (3D non-weight-bearing (NWB) CT models after manual adaption of the opening angle considering the WB state in LLR, (2) 3D NWB (3D NWB CT models) and (3) 3D WB (2D/3D registration of 3D NWB CT models onto LLR to simulate the WB state). The pre- and postoperative hip-knee-ankle angle (HKA) and the planned opening angle (°) were assessed and differences among modalities reported. The relationship between the reported differences and BMI, preoperative HKA (LLR), medial meniscus extrusion, Outerbridge osteoarthritis grade and joint line convergence angle (JLCA) was analyzed. RESULTS: The mean (std) planned opening angle of 3D hybrid did not differ between 3D hybrid and 3D WB (0.4 ± 2.1°) (n.s.) but was higher in 3D hybrid compared to 3D NWB (1.1° ± 1.1°) (p = 0.039). 3D WB demonstrated increased preoperative varus deformity compared to 3D NWB: 6.7 ± 3.8° vs. 5.6 ± 2.7° (p = 0.029). Patients with an increased varus deformity in 3D WB compared to 3D NWB (> 2 °) demonstrated more extensive varus alignment in LLR (p = 0.009) and a higher JLCA (p = 0.013). CONCLUSION: Small intermodal differences between the current practice of the reported 3D hybrid planning modality and a 3D WB approach using a 2D/3D registration algorithm were reported. In contrast, neglecting the WB state underestimates preoperative varus deformity and results in a smaller planned opening angle. This leads to potential under correction in MOWHTO, especially in patients with extensive varus deformities or JLCA. CLINICAL RELEVANCE: Incorporating the WB state in 3D planning modalities has the potential to increase accuracy and lead to a more consistent and reliable planning in MOWHTO. The inclusion of the WB state in automatized surgical planning algorithms has the potential to reduce costs and time in the future.

Morphological and Quantitative Parametric MRI Follow-up of Cartilage Changes Before and After Intra-articular Injection Therapy in Patients With Mild to Moderate Knee Osteoarthritis: A Randomized, Placebo-Controlled Trial.

BACKGROUND: Intra-articular injections are routinely used for conservative treatment of knee osteoarthritis (OA). The detailed comparative therapeutic effects of these injections on cartilage tissue are still unclear. OBJECTIVE: The aim of this study was to detect and compare knee cartilage changes after intra-articular injection of glucocorticoid, hyaluronic acid, or platelet-rich plasma (PRP) to placebo using quantitative (T2 and T2* mapping) and morphological magnetic resonance imaging parameters in patients with mild or moderate osteoarthritis. MATERIALS AND METHODS: In a double-blinded, placebo-controlled, single-center trial, knees with mild or moderate osteoarthritis (Kellgren-Lawrence grade 1-3) were randomly assigned to an intra-articular injection with 1 of these substances: glucocorticoid, hyaluronic acid, PRP, or placebo. Cartilage degeneration on baseline and follow-up magnetic resonance imaging scans (after 3 and 12 months) was assessed by 2 readers using quantitative T2 and T2* times (milliseconds) and morphological parameters (modified Outerbridge grading, subchondral bone marrow edema, subchondral cysts, osteophytes). RESULTS: One hundred twenty knees (30 knees per treatment group) were analyzed with a median patient age of 60 years (interquartile range, 54.0-68.0 years). Interreader reliability was good for T2 (ICC, 0.76; IQR, 0.68-0.83) and T2* (ICC, 0.83; IQR, 0.76-0.88) measurements. Morphological parameters showed no significant changes between all groups after 3 and 12 months. T2 mapping after 12 months showed the following significant ( P = 0.001-0.03) changes between groups in 6 of 14 compartments: values after PRP injection decreased compared with glucocorticoid in 4 compartments (complete medial femoral condyle and central part of lateral condyle) and compared with placebo in 2 compartments (anterior and central part of medial tibial plateau); values after glucocorticoid injection decreased compared with placebo in 1 compartment (central part of medial tibial plateau). No significant changes were seen for T2 and T2* times after 3 months and T2* times after 12 months. No correlation was found between T2/T2* times and Kellgren-Lawrence grade, age, body mass index, or pain (Spearman ρ, -0.23 to 0.18). CONCLUSIONS: Platelet-rich plasma injection has a positive long-term effect on cartilage quality in the medial femoral compartment compared to glucocorticoid, resulting in significantly improved T2 values after 12 months. For morphological cartilage parameters, injections with glucocorticoid, PRP, or hyaluronic acid showed no better effect in the short or long term compared with placebo.

Exercise- and education-based prehabilitation before total knee arthroplasty: a pilot study.

OBJECTIVE: To determine the feasibility and estimates of effects of a supervised exercise- and education-based prehabilitation programme aiming to improve knee functioning compared with usual care in patients awaiting total knee arthroplasty. DESIGN: A randomized controlled pilot study. SUBJECTS: Patients receiving primary, unilateral total knee arthroplasty. METHODS: Patients randomized to the intervention group participated in a personalized 4-8-week prehabilitation programme before surgery. Feasibility of the intervention and self-reported knee functioning, pain, physical performance and hospital stay were assessed at baseline, immediately preoperatively, 6 and 12 weeks after surgery. RESULTS: Twenty patients (mean age 72.7±5.95 years) were enrolled in this study. The personalized prehabilitation programme was found to be feasible and safe, with an exercise adherence of 90%. Significant medium interaction effects between groups and over time favouring prehabilitation were reported for the sport subscale of the Knee Osteoarthritis Outcome Score (F(3/54) = 2.895, p = 0.043, η² = 0.139) and Tegner Activity Scale (F(2.2/39.1) = 3.20, p = 0.048, η² = 0.151). CONCLUSION: The absence of adverse events and high adherence to the programme, coupled with beneficial changes shown in the intervention group, support the conduct of a full-scale trial investigating the effectiveness of prehabilitation.

[Osteotomies around the knee: preoperative planning using CT-based three-dimensional analysis, patient-specific cutting and reduction guides]. / Kniegelenknahe Osteotomien: operative Planung mithilfe von CT-3-D-Analyse, patientenspezifischen Schnitt- und Korrekturblöcken.

OBJECTIVE: The goal of osteotomy is either to restore pretraumatic anatomic conditions or to shift the load to less affected compartments. INDICATIONS: Indications for computer-assisted 3D analysis and the use of patient-specific osteotomy and reduction guides include "simple" deformities and, in particular, multidimensional complex (especially posttraumatic) deformities. CONTRAINDICATIONS: General contraindications for performing a computed tomography (CT) scan or for an open approach for performing the surgery. SURGICAL TECHNIQUE: Based on CT examinations of the affected and, if necessary, the contralateral healthy extremity as a healthy template (including hip, knee, and ankle joints), 3D computer models are generated, which are used for 3D analysis of the deformity as well as for calculation of the correction parameters. For the exact and simplified intraoperative implementation of the preoperative plan, individualized guides for the osteotomy and the reduction are produced by 3D printing. POSTOPERATIVE MANAGEMENT: Partial weight-bearing from the first postoperative day. Increasing load after the first x­ray control 6 weeks postoperatively. No limitation of the range of motion. RESULTS: There are several studies that have analyzed the accuracy of the implementation of the planned correction for corrective osteotomies around the knee joint with the use of patient-specific instruments with promising results.

Osteoconductive Scaffold Placed at the Femoral Tunnel Aperture in Hamstring Tendon ACL Reconstruction: A Randomized Controlled Trial.

Background: Bone tunnel enlargement after single-bundle anterior cruciate ligament reconstruction remains an unsolved problem that complicates revision surgery. Hypothesis: Positioning of an osteoconductive scaffold at the femoral tunnel aperture improves graft-to-bone incorporation and thereby decreases bone tunnel widening. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: In a 1:1 ratio, 56 patients undergoing primary anterior cruciate ligament reconstruction were randomized to receive femoral fixation with cortical suspension fixation and secondary press-fit fixation at the tunnel aperture of the tendon graft only (control) or with augmentation by an osteoconductive scaffold (intervention). Adverse events, patient-reported outcomes, and passive knee stability were recorded over 2 years after the index surgery. Three-dimensional bone tunnel widening was assessed using computed tomography at the time of surgery and 4.5 months and 1 year postoperatively. Results: The intervention group exhibited a similar number of adverse events as the control group (8 vs 10; P = .775) including 2 partial reruptures in both groups. The approach was feasible, although 1 case was encountered where the osteoconductive scaffold was malpositioned without adversely affecting the patient's recovery. There was no difference between the intervention and control groups in femoral bone tunnel enlargement, as expressed by the relative change in tunnel volume from surgery to 4.5 months (mean ± SD, 36% ± 25% vs 40% ± 25%; P = .644) and 1 year (19% ± 20% vs 17% ± 25%; P =.698). Conclusion: Press-fit graft fixation with an osteoconductive scaffold positioned at the femoral tunnel aperture is safe but does not decrease femoral bone tunnel enlargement at postoperative 1 year. Registration: NCT03462823 (ClinicalTrials.gov identifier).

An automated optimization pipeline for clinical-grade computer-assisted planning of high tibial osteotomies under consideration of weight-bearing.

3D preoperative planning for high tibial osteotomies (HTO) has increasingly replaced 2D planning but is complex, time-consuming and therefore expensive. Several interdependent clinical objectives and constraints have to be considered, which often requires multiple rounds of revisions between surgeons and biomedical engineers. We therefore developed an automated preoperative planning pipeline, which takes imaging data as an input to generate a ready-to-use, patient-specific planning solution. Deep-learning based segmentation and landmark localization was used to enable the fully automated 3D lower limb deformity assessment. A 2D-3D registration algorithm allowed the transformation of the 3D bone models into the weight-bearing state. Finally, an optimization framework was implemented to generate ready-to use preoperative plannings in a fully automated fashion, using a genetic algorithm to solve the multi-objective optimization (MOO) problem based on several clinical requirements and constraints. The entire pipeline was evaluated on a large clinical dataset of 53 patient cases who previously underwent a medial opening-wedge HTO. The pipeline was used to automatically generate preoperative solutions for these patients. Five experts blindly compared the automatically generated solutions to the previously generated manual plannings. The overall mean rating for the algorithm-generated solutions was better than for the manual solutions. In 90% of all comparisons, they were considered to be equally good or better than the manual solution. The combined use of deep learning approaches, registration methods and MOO can reliably produce ready-to-use preoperative solutions that significantly reduce human workload and related health costs.

Finite element analysis of medial closing and lateral opening wedge osteotomies of the distal femur in relation to hinge fractures.

PURPOSE: Intraoperative hinge fractures in distal femur osteotomies represent a risk factor for loss of alignment and non-union. Using finite element analysis, the goal of this study was to investigate the influence of different hinge widths and osteotomy corrections on hinge fractures in medial closed-wedge and lateral open-wedge distal femur osteotomies. METHODS: The hinge was located at the proximal margin of adductor tubercle for biplanar lateral open-wedge and at the upper border of the lateral femoral condyle for biplanar medial closed-wedge distal femur osteotomies, corresponding to optimal hinge positions described in literature. Different hinge widths (5, 7.5, 10 mm) were created and the osteotomy correction was opened/closed by 5, 7.5 and 10 mm. Tensile and compressive strain of the hinge was determined in a finite element analysis and compared to the ultimate strain of cortical bone to assess the hinge fracture risk. RESULTS: Doubling the correction from 5 to 10 mm increased mean tensile and compressive strain by 50% for lateral open-wedge and 48% for medial closed-wedge osteotomies. A hinge width of 10 mm versus 5 mm showed increased strain in the hinge region of 61% for lateral open-wedge and 32% for medial closed-wedge osteotomies. Medial closed-wedge recorded a higher fracture risk compared to lateral open-wedge osteotomies due to a larger hinge cross-section area (60-67%) for all tested configurations. In case of a 5 mm hinge, medial closed-wedge recorded 71% higher strain in the hinge region compared to lateral open-wedge osteotomies. CONCLUSION: Due to morphological features of the medial femoral condyle, finite element analysis suggests that lateral-open wedge osteotomies are the preferable option if larger corrections are intended, as a thicker hinge can remain without an increased hinge fracture risk.

Three-dimensional analysis of functional femoral antetorsion and the position of the greater trochanter in high-grade patellofemoral dysplastic knees.

BACKGROUND: The relationship between functional femoral antetorsion, the greater trochanter (GT) position and anatomical antetorsion has been demonstrated in patients with a primary hip pathology. However, the functional antetorsion and GT position have not been analyzed in patellofemoral dysplastic knees. The aim of this study was to develop a three-dimensional (3D) measurement to quantify the functional femoral antetorsion and position of the GT and to analyze these measurements in a cohort of high-grade patellofemoral dysplastic knees. METHOD: A 3D measurement was developed to analyze functional antetorsion and the axial position of the GT and assessed in 100 cadaveric femora. For validity and repeatability testing, inter- and intra-observer reliability were determined using intraclass correlation coefficients (ICCs). These measurements were then evaluated in a cohort of 19 high-grade patellofemoral dysplastic knees (Dejour type C, D). The relationship between anatomical antetorsion, functional antetorsion and GT position were reported. RESULTS: Inter- and intra-reader reliability for 3D functional antetorsion and axial position of the GT demonstrated a minimum ICC of 0.96 (P < 0.001). Anatomical and functional antetorsion demonstrated a highly linear relationship (R2 = 0.878; P < 0.001) in high-grade patellofemoral dysplastic knees. The mean difference between anatomical and functional antetorsion decreased with increasing anatomical antetorsion (R2 = 0.25; P = 0.031, indicating a more anterior position of the GT relative to the femoral neck axis. CONCLUSION: In high-grade patellofemoral dysplastic knees, the GT is located more anteriorly, relative to the femoral neck axis, with increasing anatomical antetorsion and correction osteotomy may result in an excessively anterior position of the GT.

A Randomized Trial of Intra-articular Injection Therapy for Knee Osteoarthritis.

BACKGROUND: Intra-articular injections are widely used for conservative treatment of knee osteoarthritis (OA). However, rigorous data are lacking regarding the comparative therapeutic effectiveness of these injections. PURPOSE: The aim of this study was to compare clinical outcomes after intra-articular injections of glucocorticoid, hyaluronic acid, platelet-rich plasma (PRP), or placebo in patients with mild or moderate OA of the knee. MATERIALS AND METHODS: In a double-blinded, placebo-controlled, single-center trial, we randomly assigned knees with early- to middle-stage knee OA (Kellgren-Lawrence grade 1-3) to an intra-articular injection with one of these substances: glucocorticoid, hyaluronic acid, PRP, or placebo. Primary outcome was pain reduction within 6 months after the injection, assessed with the numeric rating scale (NRS; range, 0-100). Secondary outcome parameters included WOMAC scores, Tegner Activity Scale, knee mobility, and adverse events. Finally, a linear mixed-effects model was calculated and corrected for possible patient and covariate effects. RESULTS: One hundred twenty knees (30 knees per treatment group) in 95 patients (41 female) were included in the final analysis. The median age of patients was 60 years (interquartile range, 54.0-68.0). There was no evidence that the drug effects of primary and secondary outcome parameters differed over time. The median pain at baseline was 32.5 (interquartile range, 15.00-50.00) on NRS. The changes in pain level during the first 6 months compared with baseline were small (within ±5 points on NRS), whereas the intrapatient variability was large between -20 and +20 points. Secondary outcome parameters did not differ significantly among the groups. Kellgren-Lawrence grade did not have a statistically significant effect on pain reduction ( P = 0.61). CONCLUSIONS: There is no evidence that knee injections with glucocorticoid, PRP, or hyaluronic acid have superior short- or long-term effects in patients with low pain level at baseline and early- to middle-stage knee OA when compared with placebo.

Influence of medial open wedge high tibial osteotomy on tibial tuberosity-trochlear groove distance.

PURPOSE: Medial open wedge high tibial osteotomy (MOWHTO) is an effective treatment option for realignment of a varus knee. However, a simple supra-tuberositary osteotomy can lead to patella baja and potentially increases the tibial tuberosity-trochlear groove distance (TTTG). The purpose of this study was to quantify the influence of MOWHTO on TTTG. METHODS: Three-dimensional (3D) surface models of five lower extremities with a varus hip-knee-ankle angle (HKA) and a borderline TTTG (≥ 15 mm), five lower extremities with a varus HKA and a normal TTTG (< 15 mm) and a 3D statistical shape model (SSM) of a neutrally aligned healthy knee were analysed by simulating MOWHTO with a stepwise increment of one degree of valgisation from the preoperative coronal deformity (0°-15°) for each patient, resulting in a total of 165 simulations. Postoperative 3D TTTG and tibial torsion (TT) were measured for each simulation. A mathematical formula was developed to calculate the increase of TTTG after MOWHTO. Mean differences between simulated and calculated TTTG were analysed. RESULTS: Mean preoperative HKA was 6.5 ± 3.0° varus (range 0.8°-11.5°). Mean TTTG increased from 14.2 ± 3.2 mm (range 9.6-19.1) preoperatively to 18.8 ± 3.8 mm (range 14.5-25.0) postoperatively (p = 0.001). TTTG increased approximately linear by + 0.5 ± 0.2° (range 0.3-0.8) per 1° of valgisation with a high positive correlation (0.99, p = 0.001) from 0° to 15°. Mean difference between simulated and calculated TTTG was 0.03 ± 0.02 mm (range 0.01-0.07) per 1° of valgisation (p < 0.001). CONCLUSION: MOWHTO results in an approximately linear increase in TTTG of + 0.5 mm per 1° of valgisation in the range from 0° to 15° and the lateralisation of the tibial tuberosity can be calculated reliably using the described formula. Preoperative analysis of TTTG in patients undergoing MOWHTO may prevent unintentional patellofemoral malalignment. LEVEL OF EVIDENCE: III.

No relevant mechanical leg axis deviation in the frontal and sagittal planes is to be expected after subtrochanteric or supracondylar femoral rotational or derotational osteotomy.

PURPOSE: The purpose of this study was to investigate if one level of corrective femoral osteotomy (subtrochanteric or supracondylar) bears an increased risk of unintentional implications on frontal and sagittal plane alignment in a simulated clinical setting. METHODS: Out of 100 cadaveric femora, 23 three-dimensional (3-D) surface models with femoral antetorsion (femAT) deformities (> 22° or < 2°) were investigated, and femAT normalized to 12° with single plane rotational osteotomies, perpendicular to the mechanical axis of the femur. Change of the frontal and sagittal plane alignment was expressed by the mechanical lateral distal femoral angle (mLDFA) and the posterior distal femoral angle (PDFA), respectively. The influence of morphologic factors of the femur [centrum-collum-diaphyseal (CCD) angle and antecurvatum radius (ACR)] were assessed. Furthermore, position changes of the lesser (LT) and greater trochanters (GT) in the frontal and sagittal plane compared to the hip centre were investigated. RESULTS: Mean femoral derotation of the high-antetorsion group (n = 6) was 12.3° (range 10-17°). In the frontal plane, mLDFA changed a mean of 0.1° (- 0.06 to 0.3°) (n.s.) and - 0.3° (- 0.5 to - 0.1) (p = 0.03) after subtrochanteric and supracondylar osteotomy, respectively. In the sagittal plane, PDFA changed a mean of 1° (0.7 to 1.1) (p = 0.03) and 0.3° (0.1 to 0.7) (p = 0.03), respectively. The low-antetorsion group (n = 17) was rotated by a mean of 13.8° (10°-23°). mLDFA changed a mean of - 0.2° (- 0.5° to 0.2°) (p < 0.006) and 0.2° (0-0.5°) (p < 0.001) after subtrochanteric and supracondylar osteotomy, respectively. PDFA changed a mean of 1° (- 2.3 to 1.3) (p < 0.01) and 0.5° (- 1.9 to 0.3) (p < 0.01), respectively. The amount of femAT correction was associated with increased postoperative deviation of the mechanical leg axis (p < 0.01). Using multiple regression analysis, no other morphological factors were found to influence mLDFA or PDFA. Internal rotational osteotomies decreased the ischial-lesser trochanteric space by < 5 mm in both the frontal and sagittal plane (p < 0.001). CONCLUSIONS: In case of femAT correction of ≤ 20°, neither subtrochanteric nor supracondylar femoral derotational or rotational osteotomies have a clinically relevant impact on frontal or sagittal leg alignment. A relevant deviation in the sagittal (but not frontal plane) might occur in case of a > 25° subtrochanteric femAT correction. LEVEL OF EVIDENCE: IV.