Pulse shaping in a midwave-IR OPCPA for multi-µJ few-cycle pulse generation at 12 µm via DFG.

We report on dispersion management in mid-IR optical parametric chirped pulse amplifiers (OPCPA) aiming for high-energy few-cycle pulses beyond 4 µm. The available pulse shapers in this spectral region limit the feasibility of sufficient higher-order phase control. Intending the generation of high energy pulses at 12 µm via DFG driven by the signal and idler pulses of a midwave-IR OPCPA, we introduce alternative approaches for mid-IR pulse shaping, namely a germanium-prism pair and a sapphire-prism Martinez compressor. Furthermore, we explore the limits of bulk compression in Si and Ge for multi-mJ pulse energies.

10-µJ few-cycle 12-µm source based on difference-frequency generation driven by a 1-kHz mid-wave infrared OPCPA.

We report on high-energy, few-cycle pulse generation in the long-wave infrared spectral region via difference-frequency generation (DFG) in GaSe and AgGaSe2 nonlinear crystals. The DFG is driven by the signal at 3.5 µm and idler at 5 µm of a high-power mid-wave infrared optical parametric chirped pulse amplification (OPCPA) system operating at a 1-kHz repetition rate. The DFG pulses contain up to 17 µJ of energy and cover a spectrum from 8.5 µm to 14.5 µm. They are generated with a conversion efficiency of 2.1 %. Compression results in 10.2-µJ pulses with sub-150-fs duration, corresponding to less than four optical cycles.

Cr:ZnS-based soliton self-frequency shifted signal generation for a tunable sub-100 fs MWIR OPCPA.

We present a tunable, high-energy optical parametric chirped pulse amplification system with a front-end based on a femtosecond Cr:ZnS laser. By taking advantage of the broad emission spectrum of the femtosecond Cr:ZnS master oscillator, we are able to directly seed the holmium-based pump around 2 µm. At the same time, the signal pulses for the parametric process are generated via Raman self-frequency shifting of the red end of the spectrum centered at 2.4 µm. The solitons, generated in a fluoride fiber, are tunable over the wavelength range between 2.8 and 3.2 µm. The optical parametric amplifier operates at a 1 kHz repetition rate, and consists of two stages equipped with ZGP as nonlinear crystal. The generated idler pulses are tunable between 5.4 and 6.8 µm with a pulse energy of up to 400 µJ. Dispersion management using bulk material stretching and compression in combination with precise phase shaping prior to amplification enables idler pulses of a sub-100 fs duration, translating into a peak power as high as 4 GW.

Compact OPCPA system seeded by a Cr:ZnS laser for generating tunable femtosecond pulses in the MWIR.

A compact mid-wavelength infrared (MWIR) optical parametric chirped pulse amplification (OPCPA) system generates sub-150 fs pulses at wavelengths from 5.4 to 6.8 µm with >400µJ energy at a 1 kHz repetition rate. A femtosecond Cr:ZnS master oscillator emitting 40 fs pulses at 2.4 µm seeds both a Ho:YLF regenerative amplifier and a two-stage OPCPA based on ZnGeP2 crystals. The 2.05 µm few-picosecond pump pulses from the Ho:YLF amplifier have an energy of 13.4 mJ. Seed pulses for the OPCPA are generated by soliton self-frequency shifting in a fluoride fiber and are tunable between 2.8 and 3.25 µm with a sub-100 fs duration and few-nanojoule energy. The intense MWIR pulses hold strong potential for applications in ultrafast mid-infrared nonlinear optics and spectroscopy.