Modified aluminosilicates as low-cost sorbents of As(III) from anoxic groundwater.

The utilization of low-grade clay materials as selective sorbents represents one of the most effective possibilities of As removal from contaminated water reservoirs. The simple pre-treatment of these materials with Fe (Al, Mn) salts can significantly improve their sorption affinity to As oxyanions. The natural kaolin calcined at 550 degrees C (mostly metakaolin) and raw bentonite (mostly montmorillonite) pre-treated with Fe(II), Fe(III), Al(III) and Mn(II) salts were used to remove of As from the model anoxic groundwater with As(III) concentration about 0.5 and 10 mg L(-1). All the pre-treating methods were appropriate for bentonite; the efficiency of As(III) sorption varied from 92 to >99%, by the sorption capacity higher than 4.5 mg g(-1). In the case of metakaolin, Fe(II)- and Mn(II)-treatments proved the high sorption efficiency (>97%), while only <50% of As was removed after Fe(III) and Al(III) pre-treatment. The sorption capacities of treated metakaolin ranged from 0.1 to 2.0 mg g(-1).

Sorption of As(V) on aluminosilicates treated with Fe(II) nanoparticles.

Adsorption of arsenic on clay surfaces is important for the natural and simulated removal of arsenic species from aqueous environments. In this investigation, three samples of clay minerals (natural metakaoline, natural clinoptilolite-rich tuff, and synthetic zeolite) in both untreated and Fe-treated forms were used for the sorption of arsenate from model aqueous solution. The treatment of minerals consisted of exposing them to concentrated solution of Fe(II). Within this process the mineral surface has been laden with Fe(III) oxi(hydroxides) whose high affinity for the As(V) adsorption is well known. In all investigated systems the sorption capacity of Fe(II)-treated sorbents increased significantly in comparison to the untreated material (from about 0.5 to >20.0 mg/g, which represented more than 95% of the total As removal). The changes of Fe-bearing particles in the course of treating process and subsequent As sorption were investigated by the diffuse reflectance spectroscopy and the voltammetry of microparticles. IR spectra of treated and As(V)-saturated solids showed characteristic bands caused by Fe(III)SO(4), Fe(III)O, and AsO vibrations. In untreated As(V)-saturated solids no significant AsO vibrations were observed due to the negligible content of sorbed arsenate.