An efficient and accurate semi-analytical matching technique for waveguide-fed antennas.

Several RF and microwave radiating devices, such as horn antennas, Fabry-Perot cavity antennas, and aperture-fed focusing devices, are excited through rectangular waveguides. The impedance matching of the overall system (from the waveguide feed to the radiating aperture) is a task of crucial importance that is often addressed by means of brute-force parameter-sweep full-wave analyses or blind optimization algorithms. In both cases, a significant amount of memory and time resources are required. For this purpose, we propose here a simple, yet effective solution, which only requires a single full-wave simulation and a semi-analytical procedure. The former is used to retrieve the antenna input impedance at the end of the waveguide port excitation. The semi-analytical procedure consists in a transmission-line equivalent circuit that models two waveguide discontinuities (namely two capacitive irises) within the waveguide section, whose position and geometric features are finely tuned to obtain a satisfactory impedance matching around the working frequency. The proposed method is shown to be effective in diverse and attractive application-oriented contexts, from the impedance matching of a Fabry-Perot cavity antenna to that of a wireless near-field link between two aperture-fed focusing devices. A remarkable agreement between full-wave simulations and numerical results is found in all cases. Thanks to its versatility, simplicity, and a rather low demand of computational resources, the proposed approach may become an essential tool for the effective design of waveguide-fed antennas.

A Leaky-Wave Analysis of Resonant Bessel-Beam Launchers: Design Criteria, Practical Examples, and Potential Applicationsat Microwave and Millimeter-Wave Frequencies.

Resonant Bessel-beam launchers are low-cost, planar, miniaturized devices capable of focusing electromagnetic radiation in a very efficient way in various frequency ranges, with recent increasing interest for microwave and millimeter-wave applications (i.e., 3-300 GHz). In recent years, various kinds of launchers have appeared, with different feeding mechanisms (e.g., coaxial probes, resonant slots, or loop antennas), field polarization (radial, azimuthal, and longitudinal), and manufacturing technology (axicon lenses, radial waveguides, or diffraction gratings). In this paper, we review the various features of these launchers both from a general electromagnetic background and a more specific leaky-wave interpretation. The latter allows for deriving a useful set of design rules that we here show to be applicable to any type of launcher, regardless its specific realization. Practical examples are discussed, showing a typical application of the proposed design workflow, along with a possible use of the launchers in a modern context, such as that of wireless power transfer at 90 GHz.

Reconfigurable beam-steerable leaky-wave antenna loaded with metamaterial apertures using liquid crystal-based delay lines.

An original liquid crystal (LC)-based substrate integrated waveguide (SIW) leaky-wave antenna is proposed. Inside the SIW, there is an embedded stripline sandwiched between an LC pool and another dielectric slab. The antenna couples the guided quasi-TEM mode into free space through a periodic set of complementary electric inductive-capacitive (cELC) resonators. Simulation results show that the antenna performs fixed-frequency continuous beam steering of 52° from backward -28° to forward 24° at 25.85 GHz. This relatively wide beam scan angle is achieved by tuning the LC permittivity through an applied quasi-DC bias voltage to the stripline. Simulation results show that the antenna has high realized gain through the entire scanning range (less than 1 dB degradation), relatively wide bandwidth, and good tolerance to frequency drift and fabrication errors.