Biodiesel Production Using Palm Oil with a MOF-Lipase B Biocatalyst from Candida Antarctica: A Kinetic and Thermodynamic Study.

This research presents the results of the immobilization of Candida Antarctica Lipase B (CALB) on MOF-199 and ZIF-8 and its use in the production of biodiesel through the transesterification reaction using African Palm Oil (APO). The results show that the highest adsorption capacity, the 26.9 mg·g-1 Lipase, was achieved using ZIF-8 at 45 °C and an initial protein concentration of 1.20 mg·mL-1. The results obtained for the adsorption equilibrium studies allow us to infer that CALB was physically adsorbed on ZIF-8 while chemically adsorbed with MOF-199. It was determined that the adsorption between Lipase and the MOFs under study better fit the Sips isotherm model. The results of the kinetic studies show that adsorption kinetics follow the Elovich model for the two synthesized biocatalysts. This research shows that under the experimental conditions in which the studies were carried out, the adsorption processes are a function of the intraparticle and film diffusion models. According to the results, the prepared biocatalysts showed a high efficiency in the transesterification reaction to produce biodiesel, with methanol as a co-solvent medium. In this work, the catalytic studies for the imidazolate, ZIF-8, presented more catalytic activity when used with CALB. This system presented 95% biodiesel conversion, while the biocatalyst formed by MOF-199 and CALB generated a catalytic conversion percentage of 90%. Although both percentages are high, it should be noted that CALB-MOF-199 presented better reusability, which is due to chemical interactions.

Influence of stacked structure of carbons modified on its surface on n-pentane adsorption.

In this study, the microstructure of a series of activated carbons modified on its chemistry surface was evaluated from X-ray diffraction and porous structure analysis, and the effect of the stacked graphitic structure on the n-pentane adsorption capacity. The activated carbons were prepared modifying an activated carbon (obtained from coconut shell) by carbonization processes at 1073, 1173 and 1273 K and impregnation with 65% nitric acid solution, 60% phosphoric acid solution and reflux with 30% ammonium hydroxide solution. The activated carbons were characterized by N2 adsorption at 77 K. It was found that these are essentially microporous materials with surface areas between 469 and 1113 m2 g-1, and the evaluation of the microstructure was performed by determining the number of aromatic layers stacked from the analysis of the observed diffraction peak between 20-30° 2θ which corresponds to the 002 reflection in the plane of the coal using the STACK XRD technical. The results showed that impregnation as carbonization favours the development of the crystalline structure to the activated carbons, which is shown by the increase of the stacked structure at the same time; this favours the n-pentane adsorption.