Boosting the Hydrodeoxygenation Activity and Selectivity of Ni/(M)-SBA-15 Catalysts by Chemical Alteration of the Support.

The influence of the acid sites in the hydrodeoxygenation of anisole performed over Ni catalysts supported on SBA-15 modified with metal oxides (Ni/M-SBA-15, M = Ti, Zr, Al, or Nb) was demonstrated. Catalysts were characterized by SEM-EDX, nitrogen physisorption, XRD, UV-visible DRS, TPR, TPD of ammonia, IR-Py, O2 chemisorption, and high-resolution transmission electron microscopy. The mesoporous structure and the hexagonal arrangement of the supports were maintained in the catalysts. Ni catalysts supported on modified M-SBA-15 exhibited a higher metal-support interaction, an increase in the acidity and, as a consequence, improved selectivity to cyclohexane. The deoxygenation reaction rate constants increased as Ni/SBA-15 < Ni/Ti-SBA-15 < Ni/Nb-SBA-15 < Ni/Zr-SBA-15 < Ni/Al-SBA-15, which is attributed to the increase in the amount and strength of acid sites, especially of the Brønsted ones, which promotes the cleavage of the C-O bond. It is also important to keep the metal/acid sites together to obtain high activity and selectivity to hydrodeoxygenated products.

Study of Surface Wettability Change of Unconsolidated Sand Using Diffuse Reflectance Infrared Fourier Transform Spectroscopy and Thermogravimetric Analysis.

The effects exerted by the adsorption of vapors of a non-polar compound (deuterated benzene) and a polar compound (water) on the surface of Ottawa sand and a sample of reservoir sand (Channel), which was previously impregnated with silicon oil or two kinds of surfactants, (2-hydroxyethyl) trimethylammonium oleate (HETAO) and (2-hydroxyethyl)trimethylammonium azelate (HETAA), were studied by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and thermogravimetric analysis (TGA). The surface chemistry of the sandstone rocks was elucidated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX). Terminal surface groups such as hydroxyls can strongly adsorb molecules that interact with these surface groups (surfactants), resulting in a wettability change. The wettability change effect suffered by the surface after treating it with surfactants was possible to be detected by the DRIFTS technique, wherein it was observed that the surface became more hydrophobic after being treated with silicon oil and HETAO; the surface became more hydrophilic after treating it with HETAA.