Rubber Compounds from Devulcanized Ground Tire Rubber: Recipe Formulation and Characterization.

In this study, our focus was on developing and investigating rubber recipes that are suitable for devulcanized ground tire rubber (dGTR). Devulcanized rubber has a powdery or sticky uncured rubber-like appearance depending on the extent of main-chain degradation that occurs with selective crosslinking scission. Still, it has a significantly shorter scorch time than a new rubber compound. Therefore, our primary goal was to slow down the vulcanization process of dGTR and improve its mechanical properties via recipe development. We formulated several recipes (sulfur-, peroxide-, and phenolic resin-based) and studied the vulcanization process and the main properties of the revulcanized rubber sheets. We observed that the vulcanization process could be altered with different vulcanization methods: using peroxide and vulcanizing resin extended the process significantly. Peroxide vulcanization also provided enhanced elongation compared to sulfuric systems. With a balance of properties in mind, we selected a semi-efficient sulfur-based recipe and studied the characteristics of natural rubber/dGTR mixtures with the help of plasticizer oils. We successfully replaced a notable portion of natural rubber with dGTR, maintaining its properties without much compromise.

Development of nanoparticle-filled polypropylene-based single polymer composite foams.

In this study, our focus was on developing and investigating nanoparticle-filled polypropylene-based single polymer composite foams. These composites had porous and nanotube-reinforced matrices, with plain woven polypropylene (PP) fabric as reinforcement. Our main objective was to enhance the energy absorption and stiffness of the single polymer composites (SPCs) by modifying their matrices. We produced SPCs with two different matrices: one of amorphous poly-alpha-olefin (APAO) and one of thermoplastic elastomer (TPE) blended with APAO. We observed that the APAO matrix exhibited better impregnation of the fabric due to its low viscosity, while the composites with the TPE matrix showed significantly better tensile properties. The foaming process applied to the matrices resulted in a substantial increase in energy absorption for the SPCs, while preserving their tensile properties relative to their density. Scanning electron microscope images confirmed that foaming of the APAO matrix was notably more effective, primarily due to its low viscosity. Furthermore, we successfully enhanced the stiffness and tensile properties of the SPCs by nano-reinforcing the matrices with multi-wall carbon nanotubes (MWCNTs). Due to the size of the nanotubes, this reinforcement did not compromise the impact properties of the SPCs. Scanning electron microscope images also demonstrated improved dispersion of the nanotubes within the APAO matrices.

Polypropylene Blends for Highly Drawn Tapes with Improved Toughness.

In this study, we used four amorphous poly-alpha-olefin (APAO) grades to improve the toughness of drawn polypropylene (PP) tapes. The samples containing different amounts of APAOs were drawn in a heat chamber of a tensile testing machine. The APAOs reduced the work of drawing and increased the melting enthalpy of the drawn specimens, as they facilitated the movement of the PP molecules. The APAO with the highest molecular weight and with a low level of crystallinity increased both the tensile strength and the strain-at-break of the specimens, so we also produced drawn tapes from that PP/APAO blend on a continuous-operation stretching line. The continuously drawn tapes also showed improved toughness.