Removal of COD, aromaticity and color of a pretreated chemical producing industrial wastewater: a comparison between adsorption, ozonation, and advanced oxidation processes.

A wide range of products are produced in the chemical producing industry such as textile dyes, chemicals, printing dyes and chemicals, paper chemicals, electrostatic powder dyes, and optical brighteners. The aim of this study is to investigate the treatability of chemical oxygen demand (COD), aromaticity, and color in the wastewater of this sector, where highly complex chemicals are used. Most of the studies in the literature are related to the treatment of synthetically prepared dyed wastewater. This study is important as it is carried out with real wastewater and gives results of many treatment methods. In the study, COD, UV-vis absorbance, and color values were attempted to be removed from the wastewater of a chemical producing industry that was pretreated by coagulation-flocculation. The COD value of the pretreated wastewater discharged to the central treatment system was restricted as 1000 mg/L. Pretreated wastewater characterization is as follows: COD: 2117 mg/L, UV-vis absorbance values at; 254 nm: 9.91, 280 nm: 8.65, 341 nm: 12.77, 436 nm: 5.01, 525 nm: 2.24, and 620 nm: 1.59. In the study, adsorption, ozonation, and advanced oxidation processes (Fenton and persulfate oxidation) were used to remove COD and UV-vis absorbance values (aromaticity, organics, and color). The method by which the best removal efficiency was obtained for all parameters was the adsorption process using powdered activated carbon (PAC). The equilibrium PAC dose was found as 6 g/L. At this adsorbent dose, the removal efficiencies of UV-vis absorbance values were all around 99% and the efficiency of COD removal was 77%. The Langmuir isotherm constants were found to be qmax= 30.4 mg/g and KL = 487.9 (L/mg). The COD concentration at this adsorbent dose was 486 mg/L and wastewater was suitable for discharge to the central wastewater treatment plant in that region.

Utility of a source-related matrix in basin management studies: a practice on a sub-Basin in Turkey.

According to the water framework directive (WFD), the chemical status should be determined for each water body in a basin through monitoring and evaluation studies, and the gap between the status of water bodies and good water status should be revealed in river basin management plans. In this context, the methodology starting with the evaluation of the monitoring results of the priority substances (PSs) until the end of determining the measures to achieve good condition in surface waters was given in this study. The key aim was to provide a useful methodology defined as a matrix for determining the sources of pollutants that caused this gap. This matrix was applied to the most polluted sub-basin of Küçük Menderes Basin located on the western part of the Turkey. Monitoring studies were carried out in 21 water bodies for a 1-year period for 45 PSs and monitoring results were compared with environmental quality standards (EQS). It was determined that 13 of 45 PSs in 15 water bodies exceeded the EQS. The common PSs in the basin were lead, nickel, fluoranthene, benzo(a)pyrene, C10-13 chloroalkanes, and 4-nonylphenols and average rates of exceeding the EQS were 58.3%, 36.4%, 91.5%, 99.9%, 74.8%, and 49.4%, respectively. The detailed emission inventory of each water body in the basin has been made. Potential sources of PSs were searched via the matrix formed and a total number of 420 basic and supplementary measures were proposed to improve the water quality of the sub-basin.

Determination of the color removal efficiency of laccase enzyme depending on dye class and chromophore.

The aim of this article was to clarify which type of dye chromophores could be decolorized efficiently with the use of laccase enzyme. For this purpose, enzymatic degradation of different type of dye classes (4 reactive, 2 acid and 1 basic dye) having various chromophore groups was investigated by using commercial laccase from Cerrena unicolor. It was observed that the chromophore structure of dye is very important on enzymatic color removal efficiency. According to the experimental results, it was found that color removal efficiencies (20 mg/L initial dye) were 98.7% for RB220 (0.1 g/L enzyme after 6 h), 95.1% for RB19 (0.1 g/L enzyme after 48 h), 90.8% for AR42 (0.1 g/L enzyme after 48 h) while they were 60.9% for AR114 (0.25 g/L enzyme), 58.6% for RB21 (0.5 g/L enzyme), 39.7% for RR239 (0.25 g/L enzyme) even after seven days. As a result, it can be said that the highest decolorization rate was achieved for the reactive dye having formazan copper complex (RB220) chromophore. On the other hand, the enzymatic degradation of basic dye (BB9) was found to be rather difficult compared to the acid and reactive dyes used in this study and the maximum color removal was 42.8% after seven days.

Presence and distributions of POPS in soil, atmospheric deposition, and bioindicator samples in an industrial-agricultural area in Turkey.

In this study, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were detected in the soil, lichen pine needle, and total deposition samples in the Meriç-Ergene Basin, which is one of the most important regions in terms of industrial and agricultural activities in Turkey. POP concentrations were measured in 192 samples selected to represent four seasons over a 1-year period across four different regions: an intensive industrial area, an industrial + residential area, an agricultural area, and a background area. Total PAH concentrations are found in the range of 69.6-887.6 ng/g, 74.6-1277.7 ng/g, 113.4-588.9 ng/g, and 0.00-937.8 ng/m2-day; total PCB concentrations are 9.98-62.9 ng/g, 6.8-68.1 ng/g, 11.3-32.7 ng/g, and 0.00-144.4 ng/m2-day; total OCPs concentrations are 5.9-83.2 ng/g, 7.3-85.6 ng/g, 9.9-97.1 ng/g, and 0.00-137.6 ng/m2-day respectively for soil, lichen, pine needles, and bulk samples. The data were evaluated according to pollutant groups and spatial and temporal changes. The highest PAH and PCB values were detected in lichen samples from industrial areas. The highest OCP values were detected for total deposition and soil samples and in the agricultural area. The results showed that two- to three-ring PAHs, hepta-PCBs, and cyclodienes were the most widespread pollutant groups. Statistical analyses were performed to evaluate the accumulation and indication properties of the matrices in the study for 0.05 significance level. The pollutant group in which matrices are most similar is PAHs. Total deposition samples showed the most different pattern in terms of indications, especially for PCBs. For OCP results, the concentration values obtained in soil samples were different from all other matrices. It was determined that the indication properties of the matrices identified as pollutant indicators differ markedly from the pollutant type, and this difference is at the lowest level for PAH pollutants. Graphical abstract ᅟ.

Comparison of Fenton process and adsorption method for treatment of industrial container and drum cleaning industry wastewater.

The present study aims to explore the characterization of industrial container and drum cleaning (ICDC) industry wastewater and treatment alternatives of this wastewater using Fenton and adsorption processes. Wastewater derived from ICDC industry is usually treated by chemical coagulation and biological treatment in Turkey and then discharged in a centralized wastewater treatment facility. It is required that the wastewater COD is below 1500 mg/L to treat in a centralized wastewater treatment facility. The wastewater samples were characterized for parameters of pH, conductivity, COD, BOD5, TSS, NH3-N, TN, TOC, TP, Cd, Cr, Cu, Fe, Ni, Pb, Zn, and Hg. Initial COD values were in the range of 11,300-14,200 mg/L. The optimum conditions for Fenton treatment were 35-40 g/L for H2O2, 2-5 g/L for Fe2+, and 13-36 for H2O2/Fe2+ molar ratio. The optimum conditions of PAC doses and contact times in adsorption studies were 20-30 g/L and 5-12 h, respectively. Removal efficiencies of characterized parameters for the three samples were compared for both Fenton and adsorption processes under optimum conditions. The results suggest that these wastewaters are suitable for discharge to a centralized wastewater treatment plant.

Comparison of activated carbon and bottom ash for removal of reactive dye from aqueous solution.

The adsorption of reactive dye from synthetic aqueous solution onto granular activated carbon (GAC) and coal-based bottom ash (CBBA) were studied under the same experimental conditions. As an alternative to GAC, CBBA was used as adsorbent for dye removal from aqueous solution. The amount of Vertigo Navy Marine (VNM) adsorbed onto CBBA was lower compared with GAC at equilibrium and dye adsorption capacity increased from 0.71 to 3.82 mg g(-1), and 0.73 to 6.35 mg g(-1) with the initial concentration of dye from 25 to 300 mg l(-1), respectively. The initial dye uptake of CBBA was not so rapid as in the case of GAC and the dye uptake was slow and gradually attained equilibrium.