A glucose biosensor based on novel Lutetium bis-phthalocyanine incorporated silica-polyaniline conducting nanobeads.

The facile preparation of highly sensitive electrochemical bioprobe based on lutetium phthalocyanine incorporated silica nanoparticles (SiO2(LuPc2)) grafted with Poly(vinyl alcohol-vinyl acetate) itaconic acid (PANI(PVIA)) doped polyaniline conducting nanobeads (SiO2(LuPc2)PANI(PVIA)-CNB) is reported. The preparation of CNB involves two stages (i) pristine synthesis of LuPc2 incorporated SiO2 and PANI(PVIA); (ii) covalent grafting of PANI(PVIA) onto the surface of SiO2(LuPc2). The morphology and other physico-chemical characteristics of CNB were investigated. The scanning electron microscopy images show that the average particle size of SiO2(LuPc2)PANI(PVIA)-CNB was between 180-220nm. The amperometric measurements showed that the fabricated SiO2(LuPc2)PANI(PVIA)-CNB/GOx biosensor exhibited wide linear range (1-16mM) detection of glucose with a low detection limit of 0.1mM. SiO2(LuPc2)PANI(PVIA)-CNB/GOx biosensor exhibited high sensitivity (38.53µAmM-1cm-2) towards the detection of glucose under optimized conditions. Besides, the real (juice and serum) sample analysis based on a standard addition method and direct detection method showed high precision for measuring glucose at SiO2(LuPc2)PANI(PVIA)-CNB/GOx biosensor. The SiO2(LuPc2)PANI(PVIA)-CNB/GOx biosensor stored under refrigerated condition over a period of 45 days retains ~ 96.4% glucose response current.

Excited state dynamics and conformations of a Cu(ii)-phthalocyanine-perylenebisimide dyad.

We investigate the excited state dynamics and the conformations of a new molecular donor-bridge-acceptor system, a Cu(ii)-phthalocyanine (CuPc) covalently linked via a flexible aliphatic spacer to a perylenebisimide (PBI). We performed time-resolved polarization anisotropy and pump-probe measurements in combination with molecular dynamics simulations. Our data suggest the existence of three conformations of the dyad: two more extended, metastable conformations with centre-of-mass distances >1 nm between the PBI and CuPc units of the dyad, and a highly stable folded structure, in which the PBI and CuPc units are stacked on top of each other with a centre-of-mass distance of 0.4 nm. In the extended conformations the dyad shows emission predominantly from the PBI unit with a very weak contribution from the CuPc unit. In contrast, for the folded conformation the PBI emission of the dyad is strongly quenched due to fast energy transfer from the PBI to the CuPc unit (3 ps) and subsequent intersystem-crossing (300 fs) from the first excited singlet state of CuPc unit into its triplet state. Finally, the CuPc triplet state is deactivated non-radiatively with a time constant of 25 ns.

A novel glucose sensor using lutetium phthalocyanine as redox mediator in reduced graphene oxide conducting polymer multifunctional hydrogel.

Herein, we report a scalable synthesis of multifunctional conducting polyacrylic acid (PAA) hydrogel (MFH) integrated with reduced grapheme oxide (rGO), vinyl substituted polyaniline (VS-PANI) and lutetium Phthalocyanine (LuPc2) as three dimensional robust matrix for glucose oxidase (GOx) immobilization (PAA-rGO/VS-PANI/LuPc2/GOx-MFH). We have integrated the multicomponents such as PAA with rGO, and VS-PANI through free radical polymerization using methylene bis-acrylamide, and ammonium persulphate as the cross linker and initiator. The LuPc2 was then doped to form multifunctional hydrogel (PAA-rGO/VS-PANI/LuPc2-MFH). Finally, biosensor was fabricated by immobilizing GOx into PAA-rGO/VS-PANI/LuPc2-MFH and subsequently used for electrochemical detection of glucose. The PAA-rGO/VS-PANI/LuPc2/GOx-MFH biosensor exhibited high sensitivity (15.31µAmM-1cm-2) for the detection of glucose over a concentration range of 2-12mM with a low detection limit of 25µm. The PAA-rGO/VS-PANI/LuPc2-MFH biosensor showed a fast response time (1s) to the addition of glucose with high storage stability of 3 months. The real sample analysis reveals that PAA-rGO/VS-PANI/LuPc2/GOx-MFH could be effectively used as an electrochemical biosensor in industrial as well clinical diagnosis.

Investigations and application in piezoelectric phenol sensor of Langmuir-Schäfer films of a copper phthalocyanine derivative functionalized with bulky substituents.

An octa-substituted copper phthalocyanine was dissolved in chloroform and spread on ultrapure water subphase in a Langmuir trough. The floating films were characterized at the air-water interface by the Langmuir isotherm, Brewster angle microscopy, and UV-Vis reflection spectroscopy and transferred by Langmuir-Schäfer technique on a silicon substrate, and thickness, refractive index, and extinction coefficient of the phthalocyanine derivative thin film were calculated by means of spectroscopic ellipsometry. A different number of layers were deposited using Langmuir-Schäfer method onto QCM crystals, and the active layers were tested as sensors for the detection of phenols in aqueous solution. The piezoelectric sensor response, totally reversible, is influenced by the number of transferred layers and by the nature of the substituent; on the contrary, the pK(a) value of the injected analytes slightly affects the device performances. Repeatability of the sensor responses was tested, and the frequency variation appears unchanged at least for 100 days.

Use of the electrochromic behaviour of lanthanide phthalocyanine films for nicotinamide adenine dinucleotide detection.

Electrochromic properties of spun films of bis[octakis(hexylthio)phthalocyaninato] dysprosium(III) were investigated for determining nicotinamide adenine dinucleotide hydride (NADH) in water solutions. A spin-coated film deposited on indium tin oxide electrode displays only one redox couple (at E1/2=0.78V). The films of [(C6H13S)8Pc]2Dy were modified chemically or electrochemically for the detection of reduced NADH in water solution. The modified film in the oxidized ([(C6H13S)8Pc]2Dy)+ form is believed to be reduced to its neutral form on interaction with NADH.

Synthesis, structure, spectroscopic properties, and magnetic properties of an octakis(alkylthio)-substituted lutetium(III) bisphthalocyanine.

The synthesis of a new sandwich lutetium(III) bisphthalocyanine substituted with hexylthio groups (1), [(C6H1)S)8-Pc]2Lu, is described. The compound is very soluble in most common organic solvents and has been fully characterized (elemental analysis, IR, 1H and 13C NMR, UV-vis spectroscopy, mass spectrometry). The chemically oxidized and reduced forms have been formed and characterized. The crystal structure of the compound (1) has been determined by X-ray diffraction on a single crystal. It crystallizes in the monoclinic space group C2/c with a = 31.558(2) A, b = 32.755(2) A, c = 20.489(1) A, beta = 127.119(1) degrees, and Z = 4. The temperature dependence of the magnetic susceptibility, measured on polycrystalline samples and in the range 6-300 K, is in agreement with one unpaired electron per molecular unit as found for the unsubstituted derivative. The magnetic results can be modeled assuming one-dimensional chain of spin S = 1/2 with g = 2.04 and an antiferromagnetic coupling (J = -11.83 cm(-1), H = -2JSigmaSiSj).