Fijación artroscópica sin metal del bloque óseo en la inestabilidad anterior del hombro. Resultados funcionales y radiológicos a corto plazo / Arthroscopic bone block metal-free fixation for anterior shoulder instability. Short-term functional and radiological outcomes

Introducción: Existen múltiples técnicas para la reconstrucción del defecto óseo glenoideo con bloque óseo en la inestabilidad glenohumeral anterior que reducen el riesgo de recidiva tras cirugía de partes blandas, la mayoría utilizando fijación metálica. El objetivo de este estudio es evaluar la seguridad quirúrgica y los resultados funcionales y radiológicos a corto plazo de los pacientes sometidos a una técnica artroscópica con bloque óseo y fijación sin metal. Material y métodos: Estudio retrospectivo de pacientes con inestabilidad y defecto óseo glenoideo>15% con 12 meses de seguimiento mínimo. Se sometieron a estudio radiográfico y tomografía axial computarizada. Se cumplimentaron escalas funcionales de manera pre y postoperatoria: el Western Ontario Shoulder Instability Index y la escala de Rowe. Resultados: Se incluyeron un total de 21 pacientes con una edad media de 30,6 (DE 7,1). Todos mostraron consolidación radiográfica a los 3 meses. El 90,4% de los injertos presentó osteólisis en las áreas más periféricas y el 95,2% presentó consolidación en las áreas de contacto con la glenoides. La media del área de superficie de la glenoides pasó del 79,3% preoperatoria al 98,4% a los 12 meses. Los resultados funcionales medios resultaron estadísticamente significativos (p<0,001) tanto para el Western Ontario Shoulder Instability Index (de 35,6 a 86,9) como para la escala de Rowe (de 25,2 a 96,4). No se presentaron complicaciones graves. Conclusión: La técnica de bloque óseo y fijación sin metal es un método de fijación seguro, sin componentes metálicos. Consigue una consolidación completa del injerto con buenos resultados funcionales y radiográficos a los 12 meses.(AU)

Introduction: Anterior glenohumeral bone loss reconstruction reduces failure rates after soft tissue surgery in patients with large glenoid bone defects. Multiple bone block techniques have been described, most with metal hardware fixation. The objective of this study is to evaluate the safety, as well as the short-term functional and radiological results of an arthroscopic bone block metal-free fixation or bone block cerclage. Material and methods: Retrospective study of patients with glenohumeral instability and>15% glenoid bone loss operated during 2019 with follow-up of at least 12 months. Radiography and computerized tomography studies were performed. Functional outcomes were evaluated before and after surgery with the Western Ontario Shoulder Instability Index and Rowe score. Results: A total of 21 patients with a median age of 30.6 (SD 7.1) were included. All showed radiographic consolidation at 3 months follow-up. A percentage of 90.4 of bone grafts presented osteolysis at peripherical areas and 95.2% revealed consolidation in the areas with contact to the glenoid. The median glenoid estimated surface went from 79.3% before surgery to 98.4% at 12 months. Functional scores were statically significant (P<.001) for Western Ontario Shoulder Instability Index (35.6-86.9) and Rowe score (25.2 to 96.4). No serious complications were reported. Conclusion: The bone block cerclage is a safe, metal-free technique that achieves total consolidation of the bone graft and favorable functional and radiological outcomes at 12 months follow-up.(AU)

Arthroscopic bone block metal-free fixation for anterior shoulder instability. Short-term functional and radiological outcomes / Fijación artroscópica sin metal del bloque óseo en la inestabilidad anterior del hombro. Resultados funcionales y radiológicos a corto plazo

Introduction: Anterior glenohumeral bone loss reconstruction reduces failure rates after soft tissue surgery in patients with large glenoid bone defects. Multiple bone block techniques have been described, most with metal hardware fixation. The objective of this study is to evaluate the safety, as well as the short-term functional and radiological results of an arthroscopic bone block metal-free fixation or bone block cerclage. Material and methods: Retrospective study of patients with glenohumeral instability and>15% glenoid bone loss operated during 2019 with follow-up of at least 12 months. Radiography and computerized tomography studies were performed. Functional outcomes were evaluated before and after surgery with the Western Ontario Shoulder Instability Index and Rowe score. Results: A total of 21 patients with a median age of 30.6 (SD 7.1) were included. All showed radiographic consolidation at 3 months follow-up. A percentage of 90.4 of bone grafts presented osteolysis at peripherical areas and 95.2% revealed consolidation in the areas with contact to the glenoid. The median glenoid estimated surface went from 79.3% before surgery to 98.4% at 12 months. Functional scores were statically significant (P<.001) for Western Ontario Shoulder Instability Index (35.6-86.9) and Rowe score (25.2 to 96.4). No serious complications were reported. Conclusion: The bone block cerclage is a safe, metal-free technique that achieves total consolidation of the bone graft and favorable functional and radiological outcomes at 12 months follow-up.(AU)

Introducción: Existen múltiples técnicas para la reconstrucción del defecto óseo glenoideo con bloque óseo en la inestabilidad glenohumeral anterior que reducen el riesgo de recidiva tras cirugía de partes blandas, la mayoría utilizando fijación metálica. El objetivo de este estudio es evaluar la seguridad quirúrgica y los resultados funcionales y radiológicos a corto plazo de los pacientes sometidos a una técnica artroscópica con bloque óseo y fijación sin metal. Material y métodos: Estudio retrospectivo de pacientes con inestabilidad y defecto óseo glenoideo>15% con 12 meses de seguimiento mínimo. Se sometieron a estudio radiográfico y tomografía axial computarizada. Se cumplimentaron escalas funcionales de manera pre y postoperatoria: el Western Ontario Shoulder Instability Index y la escala de Rowe. Resultados: Se incluyeron un total de 21 pacientes con una edad media de 30,6 (DE 7,1). Todos mostraron consolidación radiográfica a los 3 meses. El 90,4% de los injertos presentó osteólisis en las áreas más periféricas y el 95,2% presentó consolidación en las áreas de contacto con la glenoides. La media del área de superficie de la glenoides pasó del 79,3% preoperatoria al 98,4% a los 12 meses. Los resultados funcionales medios resultaron estadísticamente significativos (p<0,001) tanto para el Western Ontario Shoulder Instability Index (de 35,6 a 86,9) como para la escala de Rowe (de 25,2 a 96,4). No se presentaron complicaciones graves. Conclusión: La técnica de bloque óseo y fijación sin metal es un método de fijación seguro, sin componentes metálicos. Consigue una consolidación completa del injerto con buenos resultados funcionales y radiográficos a los 12 meses.(AU)

Arthroscopic bone block metal-free fixation for anterior shoulder instability. Short-term functional and radiological outcomes. / Fijación artroscópica sin metal del bloque óseo en la inestabilidad anterior del hombro. Resultados funcionales y radiológicos a corto plazo.

INTRODUCTION: Anterior glenohumeral bone loss reconstruction reduces failure rates after soft tissue surgery in patients with large glenoid bone defects. Multiple bone block techniques have been described, most with metal hardware fixation. The objective of this study is to evaluate the safety, as well as the short-term functional and radiological results of an arthroscopic bone block metal-free fixation or bone block cerclage. MATERIAL AND METHODS: Retrospective study of patients with glenohumeral instability and>15% glenoid bone loss operated during 2019 with follow-up of at least 12 months. Radiography and computerized tomography studies were performed. Functional outcomes were evaluated before and after surgery with the Western Ontario Shoulder Instability Index and Rowe score. RESULTS: A total of 21 patients with a median age of 30.6 (SD 7.1) were included. All showed radiographic consolidation at 3 months follow-up. A percentage of 90.4 of bone grafts presented osteolysis at peripherical areas and 95.2% revealed consolidation in the areas with contact to the glenoid. The median glenoid estimated surface went from 79.3% before surgery to 98.4% at 12 months. Functional scores were statically significant (P<.001) for Western Ontario Shoulder Instability Index (35.6-86.9) and Rowe score (25.2 to 96.4). No serious complications were reported. CONCLUSION: The bone block cerclage is a safe, metal-free technique that achieves total consolidation of the bone graft and favorable functional and radiological outcomes at 12 months follow-up.

Enfermedades reumatológicas en la columna vertebral: diagnóstico radiológico / Rheumatic diseases of the spine: imaging diagnosis

La afectación raquídea es frecuente tanto en las espondiloartritis como en la artritis reumatoide, la cual afecta selectivamente al segmento cervical. La afectación reumatoide de la columna cervical presenta unas manifestaciones radiológicas típicas, fundamentalmente en forma de varios tipos de patrones de inestabilidad articular atloaxoidea. La resonancia magnética (RM) es la técnica de elección para evaluar la posible repercusión mielorradicular de la inestabilidad atloaxoidea en los pacientes con artritis reumatoide, así como para evaluar parámetros indicativos de inflamación activa, como el edema óseo y la sinovitis. La afectación axial es característica en las espondiloartritis y presenta unas manifestaciones radiográficas distintivas, que reflejan fenómenos destructivos y reparativos. El uso de la RM ha cambiado la concepción de la espondiloartritis al conseguir detectar de manera directa los cambios inflamatorios propios de la enfermedad, permitiendo establecer un diagnóstico precoz cuando las radiografías son normales (espondiloartritis axial no radiográfica), evaluar el pronóstico de la enfermedad y contribuir a la planificación del tratamiento (AU)

Spinal involvement is common both in the spondyloarthritides and in rheumatoid arthritis, in which the cervical segment is selectively affected. Rheumatoid involvement of the cervical spine has characteristic radiologic manifestations, fundamentally different patterns of atlantoaxial instability. Magnetic resonance imaging (MRI) is the technique of choice for evaluating the possible repercussions of atlantoaxial instability on the spinal cord and/or nerve roots in patients with rheumatoid arthritis as well as for evaluating parameters indicative of active inflammation, such as bone edema and synovitis. Axial involvement is characteristic in the spondyloarthritides and has distinctive manifestations on plain-film X-rays, which reflect destructive and reparative phenomena. The use of MRI has changed the conception of spondyloarthritis because it is able to directly detect the inflammatory changes that form part of the disease, making it possible to establish the diagnosis early in the disease process, when plain-film X-ray findings are normal (non-radiographic axial spondyloarthritis), to assess the prognosis of the disease, and to contribute to treatment planning (AU)

Rheumatic diseases of the spine: imaging diagnosis. / Enfermedades reumatológicas en la columna vertebral: diagnóstico radiológico.

Spinal involvement is common both in the spondyloarthritides and in rheumatoid arthritis, in which the cervical segment is selectively affected. Rheumatoid involvement of the cervical spine has characteristic radiologic manifestations, fundamentally different patterns of atlantoaxial instability. Magnetic resonance imaging (MRI) is the technique of choice for evaluating the possible repercussions of atlantoaxial instability on the spinal cord and/or nerve roots in patients with rheumatoid arthritis as well as for evaluating parameters indicative of active inflammation, such as bone edema and synovitis. Axial involvement is characteristic in the spondyloarthritides and has distinctive manifestations on plain-film X-rays, which reflect destructive and reparative phenomena. The use of MRI has changed the conception of spondyloarthritis because it is able to directly detect the inflammatory changes that form part of the disease, making it possible to establish the diagnosis early in the disease process, when plain-film X-ray findings are normal (non-radiographic axial spondyloarthritis), to assess the prognosis of the disease, and to contribute to treatment planning.

Development of a molecularly imprinted polymer-matrix solid-phase dispersion method for selective determination of ß-estradiol as anabolic growth promoter in goat milk.

A simple, fast, and sensitive method for determination of 17 ß-estradiol (E2) in goat milk samples has been developed by combining selective molecularly imprinted matrix solid-phase dispersion (MIP-MSPD) and liquid chromatography with diode-array detection (DAD). The molecularly imprinted polymer was synthesized by use of 17ß-estradiol as template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker monomer, azobisisobutyronitrile as initiator, and acetonitrile as porogen, and was used as selective solid support for matrix solid-phase dispersion. The selected dispersant had high affinity for E2 in the goat milk matrix and the extract obtained was sufficiently clean for direct injection for HPLC analysis without any interferences from the matrix. The proposed MIP-MSPD method was validated for linearity, precision, accuracy, decision limit (CCα) and detection capability (CCß), in accordance with European Commission Decision 2002/657/EC criteria. Linearity ranged from 0.3-10 µg g(-1) (correlation coefficient r(2) > 0.999). Mean recovery of E2 from goat milk samples at different spiked levels was between 89.5 and 92.2%, with RSD values within 1.3-2%. CCα and CCß values were 0.36 and 0.39 µg g(-1), respectively. The developed MIP-MSPD method was successfully applied to direct determination of E2 in goat milk samples.

Adsorption of p-nitrophenol on activated carbon fixed-bed.

Carbon fixed-beds are usually used to remove organic contaminants. Adsorption in a carbon filter is a dynamic, non-steady process which is not yet completely understood. The objective of this paper is to establish a methodology to simplify the study of this process based on the wave theory, rapid small-scale column test and experimental design/surface response analysis. The constant pattern wave hypothesis was confirmed by the experimental data. The influence of the inlet concentration of p-nitrophenol and the flow rate on dynamic adsorption was studied at 20 degrees C following a central composite design using a second-order model. Both parameters have an important influence on the response variables studied. The methodology used is a useful tool for studying the dynamic process and shows interactions that are difficult to verify by the classical step-by-step method.

Determination of the energy potential of gases produced in the pyrolysis processes of the vegetal carbon manufacture industry.

In this work, a pyrolysis plant located in Valverde de Leganes, Badajoz (SW Spain) was studied. At present, only the solid phase obtained by pyrolysis finds an application as domestic fuel. In order to analyze the feasibility of a further energetic exploitation of the plant under study, the gases flowing through the chimneys were collected at different times throughout the pyrolysis process. Next, they were characterized and quantified by gas chromatography, the energy potential of each of the gases being determined. According to the results obtained in this study, a total energy potential of 5.6 x 10(7) MJ (i.e., 1.78 MW(t)) might be generated yearly. Hence, considering an overall process yield equal to 20%, up to 358 KW(e) would be produced. This power would supply enough electric energy to the industry, the remaining being added to the common electric network.