Topographically guided hierarchical mineralization.

Material platforms based on interaction between organic and inorganic phases offer enormous potential to develop materials that can recreate the structural and functional properties of biological systems. However, the capability of organic-mediated mineralizing strategies to guide mineralization with spatial control remains a major limitation. Here, we report on the integration of a protein-based mineralizing matrix with surface topographies to grow spatially guided mineralized structures. We reveal how well-defined geometrical spaces defined within the organic matrix by the surface topographies can trigger subtle changes in single nanocrystal co-alignment, which are then translated to drastic changes in mineralization at the microscale and macroscale. Furthermore, through systematic modifications of the surface topographies, we demonstrate the possibility of selectively guiding the growth of hierarchically mineralized structures. We foresee that the capacity to direct the anisotropic growth of such structures would have important implications in the design of biomineralizing synthetic materials to repair or regenerate hard tissues.

Enhanced Human-Induced Pluripotent Stem Cell Derived Cardiomyocyte Maturation Using a Dual Microgradient Substrate.

Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM) raise many possibilities for cardiac research but they exhibit an immature phenotype, which influences experimental outcomes. The aim of our research is to investigate the effects of a topographical gradient substrate on the morphology and function of commercially available hiPSC-CM. The lateral dimensions the microgrooves on the substrate varied from 8 to 100 µm space between the 8 µm grooves on one axis and from ∼5 nm to ∼1 µm in depth on the other axis. Cells were seeded homogeneously across the substrate and according to the manufacturers protocols. At days 4 and 10, measures of eccentricity, elongation, orientation, sarcomere length (SL), and contractility of the hiPSC-CM were taken. Only the deepest and widest region (8-30 µm wide and 0.85-1 µm deep) showed a significantly higher percentage of hiPSC-CM with an increased eccentricity (31.3 ± 6.4%), elongation (10.4 ± 4.3%), and orientation (<10°) (32.1 ± 2.7%) when compared with the control (flat substrate) (15.8 ± 5.0%, 3.4 ± 2.7%, and 10.6 ± 1.1%, respectively). Additionally, during stimulus-induced contraction, the relaxation phase of the twitch was prolonged (400 ms) compared to nonelongated cells (200 ms). These findings support the potential use of dual microgradient substrates to investigate substrate topographies that stimulate migration and/or maturation of hiPSC-CM.

Nanotopography and plasma treatment: redesigning the surface for vascular graft endothelialisation.

INTRODUCTION: Vascular graft materials in clinical use, such as polytetrafluoroethylene (PTFE) and Dacron, do not endothelialise and have low patency rates. The importance of an endothelial cell layer on the luminal surface of a vascular graft is well-known with surface topography and chemistry playing an important role. The aim of this study was to investigate the potential of plasma treatment and topographical structures on the luminal graft surface to enhance the self-endothelialisation potential of a nanocomposite vascular graft. METHODS: POSS-PCU is a polycarbonate urea urethane (PCU) with a nanoparticle, polyhedral oligomeric silsesquioxane (POSS) incorporated within it. Planar, microgrooved, and nanopit patterned polymer films were fabricated using photolithography, electron beam lithography, reactive ion etching, and replication by solvent casting. Films were then exposed to oxygen plasma treatment at different powers for a fixed time (40 W, 60 W, 80 W/60 seconds). Effects of plasma treatment were assessed using scanning electron microscopy, atomic force microscopy and water contact angle analysis. Human umbilical vein endothelial cell (HUVEC) proliferation and morphology were characterised using immunostaining, live/dead staining, and Coomassie blue staining. RESULTS: Successful embossing of the micro- and nanostructures was confirmed. Oxygen plasma treatment of the different samples showed that increasing power significantly increased the hydrophilicity of the samples (p < .0001). Improved HUVEC adhesion was seen on plasma modified compared with untreated samples (p < .0001). Coomassie blue staining showed that after 5 days, cells started to form monolayers and live/dead staining showed the cells were viable. Immunostaining showed that HUVECs expressed nitric oxide synthase on all topographies with focal adhesions appearing more pronounced on nanopit surfaces, showing retention of morphology and function. CONCLUSION: These encouraging results indicate a future important role for plasma treatment and nanotopography in the development of endothelialised vascular grafts.

Luminal surface engineering, 'micro and nanopatterning': potential for self endothelialising vascular grafts?

OBJECTIVE: New technologies are being explored to meet the clinical need for an 'off-the-shelf' small diameter vascular graft with superior or at least equivalent properties to autologous vessel. The field of nanotechnology and fabrication promises major advances in biomaterial design and wall structure to deliver biomimetic grafts. This review brings together recent work on this topic. METHODS: A literature search was conducted of PubMed and ISI Web of Knowledge using relevant keywords. Articles published after January 2005 were given preference. Personal communications and PhD theses were also used as sources. RESULTS: An evolving focus on surface patterning of biomaterials has been found to carry great potential. Influencing cellular behaviour on prosthetic grafts using graft luminal surface modulation at the micro- and nano-levels is the basis of this recent concept in vascular graft development. CONCLUSION: This technology may deliver small diameter grafts with the potential for spontaneous in situ endothelialisation without the need for prior 'seeding', with the potential to open a new chapter in vascular graft development.

A miniaturized bioreactor system for the evaluation of cell interaction with designed substrates in perfusion culture.

In tissue engineering, chemical and topographical cues are normally developed using static cell cultures but then applied directly to tissue cultures in three dimensions (3D) and under perfusion. As human cells are very sensitive to changes in the culture environment, it is essential to evaluate the performance of any such cues in a perfused environment before they are applied to tissue engineering. Thus, the aim of this research was to bridge the gap between static and perfusion cultures by addressing the effect of perfusion on cell cultures within 3D scaffolds. For this we developed a scaled-down bioreactor system, which allows evaluation of the effectiveness of various chemical and topographical cues incorporated into our previously developed tubular ε-polycaprolactone scaffold under perfused conditions. Investigation of two exemplary cell types (fibroblasts and cortical astrocytes) using the miniaturized bioreactor indicated that: (a) quick and firm cell adhesion in the 3D scaffold was critical for cell survival in perfusion culture compared with static culture; thus, cell-seeding procedures for static cultures might not be applicable, therefore it was necessary to re-evaluate cell attachment on different surfaces under perfused conditions before a 3D scaffold was applied for tissue cultures; (b) continuous medium perfusion adversely influenced cell spread and survival, which could be balanced by intermittent perfusion; (c) micro-grooves still maintained their influences on cell alignment under perfused conditions, while medium perfusion demonstrated additional influence on fibroblast alignment but not on astrocyte alignment on grooved substrates. This research demonstrated that the mini-bioreactor system is crucial for the development of functional scaffolds with suitable chemical and topographical cues by bridging the gap between static culture and perfusion culture.

Polyelectrolyte multilayers generated in a microfluidic device with pH gradients direct adhesion and movement of cells.

In this study, multilayers from polyethylene imine, heparin and chitosan are prepared at three different pH values of 5, 7 and 9. Water contact angle and quartz microbalance measurements show that resulting multilayers differ in terms of wetting behaviour, layer mass and mechanical properties. The multilayer is then formed within a gradient generation microfluidic (µFL) device. Polyethylene imine or heparin solutions of pH 5 are introduced into one inlet and the same solutions but at pH 9 into another inlet of the µFL device. The pH gradient established during the multilayer formation can be visualized inside the microchamber by pH sensitive fluorophores and confocal laser scanning microscopy. From this setup it is expected that properties of multilayers displayed at distinct pH values can be realised in a gradient manner inside the µFL device. Behaviour of the osteoblast cell line MG-63 seeded and cultured on top of multilayers created inside the µFL device support this hypothesis. It is observed that more cells adhere and spread on multilayers build-up at the basic side of the µFL channel, while those cells on top of multilayers built at pH 5 are fewer and smaller. These results are consistent with the behaviour of MG-63 cells seeded on multilayers formed at discrete pH values. It is particularly interesting to see that cells start to migrate from multilayers built at pH 5 to those built at pH 9 during 6 h of culture. Overall, the presented multilayer formation setup applying pH gradients leads to surfaces that promote migration of cells.

Ultrasensitive detection and characterization of biomolecules using superchiral fields.

The spectroscopic analysis of large biomolecules is important in applications such as biomedical diagnostics and pathogen detection, and spectroscopic techniques can detect such molecules at the nanogram level or lower. However, spectroscopic techniques have not been able to probe the structure of large biomolecules with similar levels of sensitivity. Here, we show that superchiral electromagnetic fields, generated by the optical excitation of plasmonic planar chiral metamaterials, are highly sensitive probes of chiral supramolecular structure. The differences in the effective refractive indices of chiral samples exposed to left- and right-handed superchiral fields are found to be up to 10(6) times greater than those observed in optical polarimetry measurements, thus allowing picogram quantities of adsorbed molecules to be characterized. The largest differences are observed for biomolecules that have chiral planar sheets, such as proteins with high ß-sheet content, which suggests that this approach could form the basis for assaying technologies capable of detecting amyloid diseases and certain types of viruses.

Biodegradable microgrooved polymeric surfaces obtained by photolithography for skeletal muscle cell orientation and myotube development.

During tissue formation, skeletal muscle precursor cells fuse together to form multinucleated myotubes. To understand this mechanism, in vitro systems promoting cell alignment need to be developed; for this purpose, micrometer-scale features obtained on substrate surfaces by photolithography can be used to control and affect cell behaviour. This work was aimed at investigating how differently microgrooved polymeric surfaces can affect myoblast alignment, fusion and myotube formation in vitro. Microgrooved polymeric films were obtained by solvent casting of a biodegradable poly-l-lactide/trimethylene carbonate copolymer (PLLA-TMC) onto microgrooved silicon wafers with different groove widths (5, 10, 25, 50, 100microm) and depths (0.5, 1, 2.5, 5microm), obtained by a standard photolithographic technique. The surface topography of wafers and films was evaluated by scanning electron microscopy. Cell assays were performed using C2C12 cells and myotube formation was analysed by immunofluorescence assays. Cell alignment and circularity were also evaluated using ImageJ software. The obtained results confirm the ability of microgrooved surfaces to influence myotube formation and alignment; in addition, they represent a novel further improvement to the comprehension of best features to be used. The most encouraging results were observed in the case of microstructured PLLA-TMC films with grooves of 2.5 and 1microm depth, presenting, in particular, a groove width of 50 and 25microm.

Asymmetric photoelectron transmission through chirally-sculpted, polycrystalline gold.

Strong circular dichroism is observed in core-level photoelectron transmission through a chirally-etched polycrystalline Au surface, consistent with a chiral dependence on the electron's orbital angular momentum.

A hierarchical response of cells to perpendicular micro- and nanometric textural cues.

In this paper, we report on the influence of shallow micro- and nanopatterned substrata on the attachment and behavior of a human fibroblast [human telomerase transfected immortalized (hTERT)] cells. We identify a hierarchy of textural guidance cues with respect to cell alignment on these substrates. Cells were seeded and cultured for 48 h on silicon substrates patterned with two linear textures overlaid at 90 degrees, both with 24 microm pitch: a micrograting and a nanopattern of rows of 140- nm-diameter pits arranged in a rectangular array with 300 nm centre-to-centre spacing. The cell response to these textures was shown to be highly dependent on textural feature dimensions. We show that cells align to the stripes of nanopits. Stripes of 30-nm deep nanopits were also shown to elicit a stronger response from cells than 160-nm deep nanopits.

The effects of nanoscale pits on primary human osteoblast adhesion formation and cellular spreading.

Current understanding of the mechanisms involved in ossesoinegration following implantation of a biomaterial has led to an emphasis being placed on the modification of material topography to control interface reactions. Recent studies have inferred nanoscale topography as an important mediator of cell adhesion and differentiation. Biomimetic strategies in orthopaedic research aim to exploit these influences to regulate cellular adhesion and subsequent bony tissue formation. Here experimental topographies of nanoscale pits demonstrating varying order have been fabricated by electron-beam lithography in (poly)carbonate. Osteoblast adhesion to these nanotopographies was ascertained by quantification of the relation between adhesion complex formation and total cell area. This study is specifically concerned with the effects these nanotopographies have on adhesion formation in S-phase osteoblasts as identified by BrdU incorporation. Nanopits were found to reduce cellular spreading and adhesion formation.

Regulation of implant surface cell adhesion: characterization and quantification of S-phase primary osteoblast adhesions on biomimetic nanoscale substrates.

Integration of an orthopedic prosthesis for bone repair must be associated with osseointegration and implant fixation, an ideal that can be approached via topographical modification of the implant/bone interface. It is thought that osteoblasts use cellular extensions to gather spatial information of the topographical surroundings prior to adhesion formation and cellular flattening. Focal adhesions (FAs) are dynamic structures associated with the actin cytoskeleton that form adhesion plaques of clustered integrin receptors that function in coupling the cell cytoskeleton to the extracellular matrix (ECM). FAs contain structural and signalling molecules crucial to cell adhesion and survival. To investigate the effects of ordered nanotopographies on osteoblast adhesion formation, primary human osteoblasts (HOBs) were cultured on experimental substrates possessing a defined array of nanoscale pits. Nickel shims of controlled nanopit dimension and configuration were fabricated by electron beam lithography and transferred to polycarbonate (PC) discs via injection molding. Nanopits measuring 120 nm diameter and 100 nm in depth with 300 nm center-center spacing were fabricated in three unique geometric conformations: square, hexagonal, and near-square (300 nm spaced pits in square pattern, but with +/-50 nm disorder). Immunofluorescent labeling of vinculin allowed HOB adhesion complexes to be visualized and quantified by image software. Perhipheral adhesions as well as those within the perinuclear region were observed, and adhesion length and number were seen to vary on nanopit substrates relative to smooth PC. S-phase cells on experimental substrates were identified with bromodeoxyuridine (BrdU) immunofluorescent detection, allowing adhesion quantification to be conducted on a uniform flattened population of cells within the S-phase of the cell cycle. Findings of this study demonstrate the disruptive effects of ordered nanopits on adhesion formation and the role the conformation of nanofeatures plays in modulating these effects. Highly ordered arrays of nanopits resulted in decreased adhesion formation and a reduction in adhesion length, while introducing a degree of controlled disorder present in near-square arrays, was shown to increase focal adhesion formation and size. HOBs were also shown to be affected morphologicaly by the presence and conformation of nanopits. Ordered arrays affected cellular spreading, and induced an elongated cellular phenotype, indicative of increased motility, while near-square nanopit symmetries induced HOB spreading. It is postulated that nanopits affect osteoblast-substrate adhesion by directly or indirectly affecting adhesion complex formation, a phenomenon dependent on nanopit dimension and conformation.

Atomic force microscopy in biology: technology and techniques.

In this review, I describe the biological applications of the atomic force microscope (AFM). The historical background and the development of the microscope are described. The AFM can operate in many different modes relevant to biological systems including topography, chemical analysis, and forces relevant at the biological length scale (single cell to DNA dimensions and pico to nano Newton forces). A limited number of examples from the literature are described to illustrate some of the many capabilities of this microscope. The aim is to give an introduction of the technique to the inexperienced in this rapidly growing field.

3D polymer scaffolds for tissue engineering.

This review discusses some of the most common polymer scaffold fabrication techniques used for tissue engineering applications. Although the field of scaffold fabrication is now well established and advancing at a fast rate, more progress remains to be made, especially in engineering small diameter blood vessels and providing scaffolds that can support deep tissue structures. With this in mind, we introduce two new lithographic methods that we expect to go some way to addressing this problem.

Cells react to nanoscale order and symmetry in their surroundings.

Mammalian cells react to microstructured surfaces, but there is little information on the reactions to nanostructured surfaces, and such as have been tested are poorly ordered or random in their structure. We now report that ordered surface arrays (orthogonal or hexagonal) of nanopits in polycaprolactone or polymethylmethacrylate have marked effects in reducing cell adhesion compared with less regular arrays or planar surfaces. The pits had diameters of 35, 75, and 120 nm, respectively, with pitch between the pits of 100, 200, and 300 nm, respectively. The cells appear to be able to distinguish between different symmetries of array. We suggest that interfacial forces may be organized by the nanostructures to affect the cells in the same way as they affect liquid crystal orientations.

Rapid fibroblast adhesion to 27nm high polymer demixed nano-topography.

It is well known that many cell types react strongly to micro-topography. It is rapidly becoming clear than cells will also react to nano-topography. Polymer demixing is a rapid and low-cost chemical method of producing nano-topography. This manuscript investigates human fibroblast response to 27nm high nano-islands produced by polymer demixing. Cell spreading, cytoskeleton, focal adhesion and Rac localisation were studied. The results showed that an initial rapid adhesion and cytoskeletal formation on the islands at 4 days of culture gave way to poorly formed contacts and vimentin cytoskeleton at 30 days of culture.

Quantification of grafted poly(ethylene glycol)-silanes on silicon by time-of-flight secondary ion mass spectrometry.

Silicon grafted monodisperse poly(ethylene glycol) (PEG) silanes with various PEG chain lengths and mixtures of these were systematically analyzed with static time-of-flight secondary ion mass spectrometry (TOF-SIMS). The mass spectra show differences in the various relative signal intensities, an observation that was used to elucidate important aspects of the grafting process. The relationship between PEG-silane fragment ion abundances and Si(+) ion abundances were used to (i) qualitatively describe layer thicknesses of grafted mixtures of PEG-silanes on silicon, (ii) construct a calibration curve from which PEG chain length (or molecular mass) can be determined and (iii) quantitatively determine surface mixture compositions of grafted monodisperse PEG-silanes of different chain lengths (3, 7 and 11 PEG units). The results suggest that discrimination does take place in the adsorption process. The PEG-silane with the shorter PEG chain is discriminated for mixtures containing PEG3-silane, whereas the PEG-silane with the longer PEG chain is discriminated in PEG7/PEG11-silane mixtures. The origin of this difference in adsorption behavior is not well understood. Aspects of the grafting process and the TOF-SIMS analyses are discussed.