Controlled di-lithiation enabled synthesis of phosphine-sulfonamide ligands and implications in ethylene oligomerization.

Catalyst design for ethylene oligomerization has attracted significant interest. Herein, we report the synthesis of phosphine-sulfonamide-derived palladium complexes and examine their performance in ethylene oligomerization. Arresting a dilithiation intermediate of N-(2-bromophenyl)-4-methylbenzenesulfonamide (1) at -84 °C selectively produced N-(2-(bis(2-methoxyphenyl)phosphanyl)phenyl)-4-methylbenzenesulfonamide (L1A). However, the same reaction at -41 °C delivered a different ligand; 2-(bis(2-methoxyphenyl)phosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2A). The generality of our strategy has been demonstrated by preparing N-(2-(diphenylphosphanyl)phenyl)-4-methylbenzenesulfonamide (L1B) and 2-(diphenylphosphanyl)-4-methyl-N-phenylbenzenesulfonamide (L2B). Subsequently, L1A and L1B were treated with a palladium precursor to yield 5-membered complexes C1 and C2, respectively. In contrast, L2A upon treatment with palladium produced a 6-membered metal complex C3. Thus, a small library of 7 palladium complexes (C1-C7) were synthesized by varying the donor moiety (pyridine, DMSO, and acetonitrile). The identity of palladium complexes was unambiguously ascertained using a combination of spectroscopic and analytical methods, including single-crystal X-ray diffraction. The performance of the complexes C1-C7 was investigated in ethylene oligomerization and almost all of them were found to be active. The resultant ethylene oligomers were characterized using 1H and 13C NMR, MALDI-ToF-MS, and GPC. Detailed screening of reaction parameters revealed 100 °C and 40 bars ethylene to be optimal conditions. Complex C5 outperformed other complexes and produced ethylene oligomers with a molecular weight of 1000-1900 g mol-1.

Palladium-Catalyzed Insertion of Ethylene and 1,1-Disubstituted Difunctional Olefins: An Experimental and Computational Study.

Insertion or coordination copolymerization of ethylene with di-substituted olefins is challenging and the choice of di-substituted mono-functional olefin versus di-substituted di-functional olefin (DDO) appears to be decisive. Here we show that DDO-inserted species are amenable to ethylene insertion and polymerization. DDOs such as 2-acetamidoacrylic acid (AAA), methyl 2-acetamidoacrylate (MAAA), and ethyl 2-cyanoacrylate (ECA) were treated with palladium complex [{P∧O}PdMe(L)] (P∧O=κ2 -P,O-Ar2 PC6 H4 SO2 O with Ar=2-MeOC6 H4 ; L=C2 H6 OS) and the existence of respective insertion intermediates in moderate yield (up to 37 %) was established. These intermediates were exposed to ethylene and corresponding ethylene-inserted products were isolated and characterized. A careful comparison with three model compounds confirmed ethylene insertion and polymerization. Thus, the combined experimental and computational investigations show that DDO-inserted species can undergo ethylene insertion and polymerization.

Pd-Iminocarboxylate Complexes and Their Behavior in Ethylene Polymerization.

Designing co-catalyst-free late transition metal complexes for ethylene polymerization is a challenging task at the interface of organometallic and polymer chemistry. Herein, a set of new, co-catalyst-free, single-component catalytic systems for ethylene polymerization have been unraveled. Treatment of anthranilic acid with various aldehydes produced four iminocarboxylate ligands (L1-L4) in very good to excellent yield (75-92 %). The existence of 2-((2-methoxybenzylidene)amino) benzoic acid (L1) has been unambiguously demonstrated using NMR spectroscopy, MS and single-crystal X-ray diffraction. A neutral Pd-iminocarboxylate complex [{N O}PdMe(L1)] (N O=κ2 -N,O-ArCHNC6 H4 CO2 with Ar=2-MeOC6 H4 ) C1 was prepared by treating stoichiometric amount of L1.Na with palladium precursor. The identity of C1 was confirmed by 1-2D NMR spectroscopy and single-crystal X-ray diffraction studies. Along the same lines, palladium complexes C2-C4 were prepared from ligands L2-L4 respectively. In-situ high-pressure NMR investigations revealed that these Pd complexes are amenable to ethylene insertion and undergo facile ß-H elimination to produce propylene. These palladium complexes were then evaluated in ethylene polymerization reaction and various reaction parameters were screened. When C1-C4 were exposed to ethylene pressures of 10-50 bar, formation of low-molecular-weight polyethylene was observed.

Neutral Imino-Methyl Benzenesulfonate-Ligated Pd(II) Complexes and Implications in Ethylene Polymerization.

A reaction between sodium 2-formylbenzenesulfonate and aniline revealed the near-quantitative (91%) formation of sodium-2-((phenylimino)methyl)benzenesulfonate L1. The identity of L1 was unambiguously ascertained using spectroscopic and analytical methods. The scope of this methodology was widened and various electron-donating amines were treated with sodium 2-formylbenzenesulfonate, and a small library of 6 imine ligands L2-L6 was generated. When L2 was treated with [(COD)PdMeCl], instead of the anticipated [L2PdMe(DMSO)] complex, the formation of [(DMSO)2Pd2Cl2Me2] Pd-Dim was observed. Nevertheless, the desired imino-methyl benzenesulfonate-ligated palladium complex [L2PdMe(Lu)] C1 was obtained by in situ abstraction of chloride and addition of bulky 2,6-lutidine as the donor group. The observation of characteristic Pd-Me protons at 0.06 ppm and the corresponding carbon at -8.1 ppm indicated the formation of C1. These 1D NMR observations were corroborated by 2D C-H correlation spectra and mass analysis, and the existence of C1 was unambiguously ascertained. Along the same lines, L4 and L5 were treated with a palladium precursor to produce [L4/5PdMe(Lu)]-type complexes C2-C3 in 55-84% yield, and their identity was established by using a combination of spectroscopic tools, analytical methods, and single-crystal X-ray diffraction. The synthetic utility of C1-C3 has been demonstrated by utilizing these complexes in the insertion polymerization of ethylene to polyethylene.

H-Bonding Assisted Self-Assembly of Anionic and Neutral Ligand on Metal: A Comprehensive Strategy To Mimic Ditopic Ligands in Olefin Polymerization.

Self-assembly of two neutral ligands on a metal to mimic bidentate ligand coordination has been frequently encountered in the recent past, but self-assembly of an anionic ligand on a metal template alongside a neutral ligand remains an elusive target. Such a self-assembly is hampered by additional complexity, wherein a highly negatively charged anion can form intermolecular hydrogen bonding with the supramolecular motif, leaving no scope for self-assembly with neutral ligand. Presented here is the self-association of anionic ligand 3-ureidobenzoic acid (2a) and neutral ligand 1-(3-(diphenylphosphanyl)phenyl)urea (1a) on a metal template to yield metal complex [{COOC6H4NH(CO)NH2}{Ph2PC6H4NH(CO)NH2}PdMeDMSO] (4a). The identity of 4a was established by NMR and mass spectroscopy. Along the same lines, 3-(3-phenylureido)benzoic acid (2b) and 1-(3-(diphenylphosphanyl)phenyl)-3-phenylurea (1b) self-assemble on a metal template to produce palladium complex [{COOC6H4NH(CO)NHPh}{Ph2PC6H4NH(CO)NHPh}PdMePy] (5c). The existence of 5c was confirmed by Job plot, 1-2D NMR spectroscopy, deuterium labeling, IR spectroscopy, UV-vis spectroscopy, model complex synthesis, and DFT calculations. These solution and gas phase investigations authenticated the presence of intramolecular hydrogen bonding between hydrogen's of 1b and carbonyl oxygen of 2b. The generality of the supramolecular approach has been validated by preparing six complexes from four monodentate ligands, and their synthetic utility was demonstrated in ethylene polymerization. Complex 4a was found to be the most active, leading to the production of highly branched polyethylene with a molecular weight of 55700 g/mol and melting temperature of 112 °C.

Insertion Copolymerization of Difunctional Polar Vinyl Monomers with Ethylene.

A single-step synthesis, structural characterization and application of a neutral, acetonitrile ligated, palladium-phosphinesulfonate complex [{P∧O}PdMe(L)] (P∧O = κ2-P,O-Ar2PC6H4SO2O with Ar = 2-MeOC6H4; L = CH3CN) (3) in coordination/insertion copolymerization of ethylene with difunctional olefin is investigated. In a significant development, complex 3 was found to catalyze insertion copolymerization of industrially relevant 1,1-disubstituted difunctional vinyl monomers for the first time. Thus, insertion copolymerization of ethyl-2-cyanoacrylate (ECA or super glue) and trifluoromethyl acrylic acid (TFMAA) with ethylene produced the corresponding copolymers with 6.5% ECA and 3% TFMAA incorporation. Increasing the concentration of difunctional olefins led to higher incorporation but at the expense of lower activities. These observations indicate that complex 3 tolerates difunctional vinyl monomers and provides direct access to difunctional polyolefins that have not been attempted before.