Light-induced spin-state switching in Fe(II) spin-crossover complexes with thiazole-based chelating ligands.

Homoleptic complexes [Fe(4bt)3](ClO4)2 (1), [Fe(2bt)3](ClO4)2 (2), and [Fe(3tpH)3](ClO4)2 (3) were obtained by a reaction between the Fe(II) precursor salt and the corresponding thiazole-based bidentate ligand (L = 4bt = 4,4'-bithiazole, 2bt = 2,2'-bithiazole, 3tpH = 3-(thiazol-2-yl)pyrazole). X-ray crystal structure determination revealed crystallization of solvent-free complex 1, a solvate 2·MeOH, and a co-crystal 3·2(3tpH). The crystal packing of all these complexes is dominated by one-dimensional interactions between the [Fe(L)3]2+ cations. These interactions are stronger in 2·MeOH and 3·2(3tpH), leading to cooperative and slightly hysteretic transitions between the high-spin and low-spin electronic configurations at ∼235 K and 159 K, respectively. In contrast, weaker intermolecular interactions in 1 result in a gradual spin crossover above 300 K, with the maximum fraction of the HS state ∼25% achieved at 400 K. Complexes 2 and 3·2(3tpH) exhibit light-induced excited spin state trapping (LIESST) under irradiation with white light or a 532 nm laser at 5 K. After the photoexcitation, the trapped metastable HS state relaxes to the ground LS state with the average relaxation temperature of 81 K and 68 K, respectively. Examination of the relaxation dynamics by optical absorption spectroscopy on a single crystal of 3·2(3tpH) revealed the sigmoidal shape of the relaxation curves at lower temperatures, attributed to cooperative effects, as well as a plateau at ∼10% of the HS fraction at intermediate temperatures, hinting at a more complex mechanism for the relaxation of the LIESST phase in this material.

Homoleptic Rare-Earth-Metal Sandwiches with Dibenzo[a,e]cyclooctatetraene Dianions.

A family of rare-earth complexes [RE(III) = Y, La, Gd, Tb, Dy, and Er] with doubly reduced dibenzo[a,e]cyclooctatetraene (DBCOT) has been synthesized and structurally characterized. X-ray diffraction analysis confirms that all products of the [RE(DBCOT)(THF)4][RE(DBCOT)2] composition consist of the anionic sandwich [RE(DBCOT)2]- and the cationic counterpart [RE(DBCOT)(THF)4]+. Within the sandwich, two elongated π decks are slightly bent toward the metal center (avg. 7.3°) with a rotation angle of 35.9-37.6°. The RE(III) ion is entrapped between the central eight-membered rings of DBCOT2- in a η8 fashion. The trends in the RE-COT bond lengths are consistent with the variations of the ionic radii of RE(III) centers. The 1H NMR spectra of the diamagnetic Y(III) and La(III) analogues illustrate the distinct solution behavior for the cationic and anionic parts in this series. Magnetic measurements for the Dy analogue reveal single-molecule magnetism, which was rationalized by considering the effect of crystal-field splitting for both building units analyzed by electronic structure calculations.

Polyhydroxy Fullerenes Enhance Antibacterial and Electrocatalytic Activity of Silver Nanoparticles.

Silver nanoparticles (AgNPs) are known and widely used for their antibacterial properties. However, the ever-increasing resistance of microorganisms compels the design of novel nanomaterials which are able to surpass their capabilities. Herein, we synthesized silver nanoparticles using, for the first time, polyhydroxy fullerene (PHF) as a reducing and capping agent, through a one-pot synthesis method. The resulting nanoparticles (PHF-AgNPs) were compared to AgNPs that were synthesized using sodium citrate (citrate-AgNPs). They were characterized using high-resolution transmission electron microscopy (HR-TEM), dynamic light scattering, and UV-visible spectroscopy. Our results showed that PHF-AgNPs have a smaller size and a narrower size distribution than citrate-AgNPs, which suggests that PHF may be a better capping agent than citrate. Antibacterial assays using E. coli showed enhanced antimicrobial activity for PHF-AgNPs compared to citrate-AgNPs. The electrocatalytic activity of nanoparticles towards oxygen evolution and reduction reaction (OER and ORR, respectively) was tested through cyclic voltammetry. Both nanoparticles are found to promote OER and ORR, but PHF-AgNPs showed a significant increase in activity with respect to citrate-AgNPs. Thus, our results demonstrate that the properties of forming nanoparticles can be tuned by choosing the appropriate reducing/capping agent. Specifically, this suggests that PHF-AgNPs can find potential applications for both catalytic and biomedical applications.

Abrupt Spin Transition in a Heteroleptic Fe(II) Complex with Pendant Naphthalene Functionality.

A heteroleptic spin-crossover (SCO) complex, [Fe(tpma)(xnap-bim)](ClO4)2 (1; tpma = tris(2-pyridylmethyl)amine, xnap-bim = 8,15-dihydrodiimidazo[1,2-a:2',1'-c]naphtho[2,3-f][1,4]diazocine), has been obtained by reacting a Fe(II) precursor salt with tetradentate tpma and bidentate xnap-bim ligands. Depending on crystallization conditions, two different solvates have been obtained, 1·2.25py·0.5H2O and 1·py. The former readily loses the interstitial solvent to produce either a powder sample of 1 upon filtration or crystals of 1 if the solvent loss is slowed by placing the crystals of 1·2.25py·0.5H2O in diethyl ether. In contrast, 1·py exhibits higher stability toward solvent loss. The crystal packing of both solvates and of the solvent-free structure features double columns of [Fe(tpma)(xnap-bim)]2+ cations formed by efficient π-π interactions between the pyridyl groups of tpma ligands, as well as by stacks supported by π-π interactions between interdigitated naphthalene fragments of xnap-bim ligands. While both solvates show a gradual SCO between the high-spin (HS) and low-spin (LS) states of the Fe(II) ion, solvent-free complex 1 exhibits an abrupt spin transition centered at 127 K, with a narrow 2 K thermal hysteresis. Complex 1 also shows a light-induced excited spin state trapping effect, manifested as LS → HS conversion upon irradiation with white light at 5 K. The metastable HS state relaxes to the ground LS state when heated above 65 K.

Asymmetric Design of Spin-Crossover Complexes to Increase the Volatility for Surface Deposition.

A mononuclear complex [Fe(tBu2qsal)2] has been obtained by a reaction between an Fe(II) precursor salt and a tridentate ligand 2,4-di(tert-butyl)-6-((quinoline-8-ylimino)methyl)phenol (tBu2qsalH) in the presence of triethylamine. The complex exhibits a hysteretic spin transition at 117 K upon cooling and 129 K upon warming, as well as light-induced excited spin-state trapping at lower temperatures. Although the strongly cooperative spin transition suggests substantial intermolecular interactions, the complex is readily sublimable, as evidenced by the growth of its single crystals by sublimation at 573 → 373 K and ∼10-3 mbar. This seemingly antagonistic behavior is explained by the asymmetric coordination environment, in which the tBu substituents and quinoline moieties appear on opposite sides of the complex. As a result, the structure is partitioned in well-defined layers separated by van der Waals interactions between the tBu groups, while the efficient cooperative interactions within the layer are provided by the quinoline-based moieties. The abrupt spin transition is preserved in a 20 nm thin film prepared by sublimation, as evidenced by abrupt and hysteretic changes in the dielectric properties in the temperature range comparable to the one around which the spin transition is observed for the bulk material. The changes in the dielectric response are in excellent agreement with differences in the dielectric tensor of the low-spin and high-spin crystal structures evaluated by density functional theory calculations. The substantially higher volatility of [Fe(tBu2qsal)2], as compared to a similar complex without tBu substituents, suggests that asymmetric molecular shapes offer an efficient design strategy to achieve sublimable complexes with strongly cooperative spin transitions.

On stabilizing spin crossover molecule [Fe(tBu2qsal)2] on suitable supports: insights fromab initiostudies.

Au(111) is one of the substrates often used for supporting spin crossover (SCO) molecules, partly because of its inertness and partly because it is conducting. Using density functional theory based calculations of [Fe(tBu2qsal)2] SCO molecules adsorbed on the Au(111) surface, we show that while Au(111) may not be a suitable support for the molecule, it may be so for a monolayer (ML) of molecules. While, physisorption of [Fe(tBu2qsal)2] on Au(111) leads to electron transfer from the highest occupied molecular orbital to the substrate, electron transfer is minimal for a ML of [Fe(tBu2qsal)2] on Au(111), causing only negligible changes in the electronic structure and magnetic moment of the molecules. Furthermore, a small difference in energy between the ferromagnetic and antiferromagnetic configurations of the molecules in the ML indicates a weak magnetic coupling between the molecules. These results suggest Au(111) as a plausible support for a ML of [Fe(tBu2qsal)2], making such a molecular assembly suitable for electronic and spin transport applications. As for [Fe(tBu2qsal)2] SCO molecules themselves, we find hexagonal boron nitride (h-BN) to be a viable support for them, as there is hardly any charge transfer, while graphene displays stronger interaction with the molecule (thanh-BN does) resulting in charge transfer from the molecule to graphene.

Synthesis of Highly Concentrated Suspensions of Silver Nanoparticles by Two Versions of the Chemical Reduction Method.

In spite of the widespread use of the chemical reduction method to obtain silver nanoparticles, the nanoparticle yield is often low due to a required addition of small volumes of diluted metal ions to a solution containing a reducer. Higher yields can be obtained following an alternative method, in which the reducer is added to a greater volume of silver ions in the solution. In this study, protocols for both methods are detailed and compared, using characterization tools such as UV-vis spectrometry, dynamic light scattering (DLS), and zeta potential measurements. By using this alternative method, the amount of silver in the solution is three times greater, and nanoparticles with a narrower size distribution are formed (between 6 and 70 nm in size). In contrast, the regular method produces particles of 3 and 100 nm. Zeta potential measurements indicate that the nanoparticles synthesized with the alternative method will be more stable than those from the regular method.