Effect of Cold-Rolling Deformation on the Microstructural and Mechanical Properties of a Biocompatible Ti-Nb-Zr-Ta-Sn-Fe Alloy.

The primary focus of the current paper centers on the microstructures and mechanical properties exhibited by a Ti-30Nb-12Zr-5Ta-2Sn-1.25Fe (wt. %) (TNZTSF) alloy that has been produced through an intricate synthesis process comprising cold-crucible induction in levitation, carried out in an atmosphere controlled by argon, and cold-rolling deformation (CR), applying systematic adjustments in the total deformation degree (total applied thickness reduction), spanning from 10% to 60%. The microstructural characteristics of the processed specimens were investigated by SEM and XRD techniques, and the mechanical properties by tensile and microhardness testing. The collected data indicate that the TNZTSF alloy's microstructure, in the as-received condition, consists of a ß-Ti phase, which shows polyhedral equiaxed grains with an average grain size close to 82.5 µm. During the cold-deformation processing, the microstructure accommodates the increased applied deformation degree by increasing crystal defects such as sub-grain boundaries, dislocation cells, dislocation lines, and other crystal defects, powerfully affecting the morphological characteristics. The as-received TNZTSF alloy showed both high strength (i.e., ultimate tensile strength close to σUTS = 705.6 MPa) and high ductility (i.e., elongation to fracture close to εf = 11.1%) properties, and the computed ß-Ti phase had the lattice parameter a = 3.304(7) Å and the average lattice microstrain ε = 0.101(3)%, which are drastically influenced by the applied cold deformation, increasing the strength properties and decreasing the ductility properties due to the increased crystal defects density. Applying a deformation degree close to 60% leads to an ultimate tensile strength close to σUTS = 1192.1 MPa, an elongation to fracture close to εf = 7.9%, and an elastic modulus close to 54.9 GPa, while the computed ß-Ti phase lattice parameter becomes a = 3.302(1) Å.

The Effect of Solution Treatment Duration on the Microstructural and Mechanical Properties of a Cold-Deformed-by-Rolling Ti-Nb-Zr-Ta-Sn-Fe Alloy.

The study presented in this paper is focused on the effect of varying the solution treatment duration on both the microstructural and mechanical properties of a cold-deformed by rolling Ti-30Nb-12Zr-5Ta-2Sn-1.25Fe (wt.%) alloy, referred to as TNZTSF. Cold-crucible induction using the levitation synthesis technique, conducted under an argon-controlled atmosphere, was employed to fabricate the TNZTSF alloy. After synthesis, the alloy underwent cold deformation by rolling, reaching a total deformation degree (total applied thickness reduction) of 60%. Subsequently, a solution treatment was conducted at 850 °C, with varying treatment durations ranging from 2 to 30 min in 2 min increments. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were utilized for the structural analysis, while the mechanical properties were assessed using both tensile and hardness testing. The findings indicate that (i) in both the cold-deformed-by-rolling and solution-treated states, the TNZTSF alloy exhibits a microstructure consisting of a single ß-Ti phase; (ii) in the solution-treated state, the microstructure reveals a rise in the average grain size and a decline in the internal average microstrain as the duration of the solution treatment increases; and (iii) owing to the ß-phase stability, a favorable mix of elevated strength and considerable ductility properties can be achieved.

Microstructural Considerations of a Multi-Pass Rolled Ti-Nb-Ta-Zr Alloy.

The microstructural characteristic evolution was investigated during thermomechanical processing of Ti-29Nb-9Ta-10Zr (wt %) alloy, which consisted of, in a first stage, in a Multi-Pass Rolling with increasing thickness reduction of 20%, 40%, 60%, 80%, and 90%; in step two, the multi-pass rolled sample with the highest thickness reduction (90%) was subjected to a series of three variants of static short recrystallization and then to a final similar aging. The objective was to evaluate the microstructural features evolution during thermomechanical processing (phase's nature, morphology, dimensions, and crystallographic characteristics) and to find the optimal heat treatment variant for refinement of the alloy granulation until ultrafine/nanometric level for a promising combination of mechanical properties. The microstructural features were investigated by X-ray diffraction and SEM techniques through which the presence of two phases was recorded: the ß-Ti phase and the α″-Ti martensitic phase. The corresponding cell parameters, dimensions of the coherent crystallite and the micro-deformations at the crystalline network level for both recorded phases were determined. The majority ß-Ti phase underwent a strong refinement during the Multi-Pass Rolling process until ultrafine/nano grain dimension (about 9.8 nm), with subsequent slow growing during recrystallization and aging treatments, hindered by the presence of sub-micron α″-Ti phase dispersed inside ß-Ti grains. An analysis concerning the possible deformation mechanisms was performed.

The Reliability and Validity of Dental Indifference Scale among Romanian Young Adults.

The study aimed at examining the reliability and the validity of the Dental Indifference Scale (DIS), which measures the significant undervaluing attitude towards the state of one's oral health. The study has a cross-sectional design in which 660 young Romanian adults (Meanage = 30.69; 30.30% males) completed an online survey in which the Dental Indifference Scale was included alongside five items related to one's behavior towards oral health. The reliability was calculated by means of internal consistency and test-retest after two or three weeks. The DIS scores were associated with the questions regarding oral health habits. Although DIS is discriminatory regarding the behavior towards oral hygiene (brushing, flossing) and diet, the reliability of the scale is low (α = 0.37; ω = 0.39; Intraclass correlation coefficienttest-retest = 0.60). In comparison with prior research, no gender differences were found. In exchange, the scores for dental indifference (DI) are significantly different when it comes to comparing people with secondary education and people who are university graduates. The study shows that DIS needs to be used with caution and only with other instruments that evaluate attitudes and behaviors related to oral health which passed the test of validation in various cultural models, the Romanian one included.

Dental Pulp Response to Different Types of Calcium-Based Materials Applied in Deep Carious Lesion Treatment-A Clinical Study.

Dental pulp vitality preservation in dental caries treatment is a major goal in odontotherapy. The main objective of this study was to compare dental pulp tissue responses to vital therapies in deep carious lesions, using different calcium-based materials. An ambispective study was conducted on 47 patients. Ninety-five teeth with deep carious lesions were treated. Among them, 25 (26.32%) were diagnosed with pulpal exposures and treated by direct pulp capping. Indirect pulp capping was applied when pulp exposure was absent (n = 70; 73.68%). Fifty teeth (52.63%) were treated with TheraCal LC (prospective study), 31 teeth (32.63%) with Calcimol LC, and 14 teeth (14.74%) with Life Kerr AC (retrospective study). The results show that the survival rate for dental pulp was 100% for Life Kerr AC, 92% for TheraCal LC, and 83.87% for Calcimol LC, without significant differences. Apparently, self-setting calcium hydroxide material provided better dental pulp response than the two light-cured materials, regardless of their composition, that is, either calcium -hydroxide or calcium silicate-based. We will need a significant number of long-term clinical studies with the highest levels of evidence to determine the most adequate biomaterials for vital pulp therapies.

Laser Powder Bed Fusion Applied to a New Biodegradable Mg-Zn-Zr-Ca Alloy.

The aim of the present paper is to apply the laser powder bed fusion process to a new biodegradable Mg-Zn-Zr-Ca alloy powder prepared via a mechanical alloying method from powder pure components. This additive manufacturing method is expected to allow for the obtaining of high biomechanical and biochemical performance. Various processing parameters for laser powder bed fusion are tested, with a special focus on laser energy density-E [J/mm3]-which is calculated for all experiment variants, and which represents an important processing parameter, dependent upon all the rest. The goal of all the trials is to find the most efficient schema for the production of small biodegradable parts for the medical domain, meaning the selection of optimal processing parameters. An important observation is that the most robust and homogeneous samples without cracks are obtained for lower values of the E, around 100 J/mm3. Thus, the most performant samples are analyzed by scanning electron microscopy, X-ray diffraction and by compression mechanical test.

Self-Perceived Impact of COVID-19 Pandemic by Dental Students in Bucharest.

All social and economic systems worldwide, including the educational one have been disrupted by escalating the global COVID-19 pandemic. One of the most impacted areas were the medical and dental education fields, due to the forced break from clinical practice during the lockdown, which affected both the educational part, as well as the patients. Thus, the main goal of our research was to investigate the impact of the COVID-19 pandemic on the dental students' education as related to their perceptions and evaluations, in Carol Davila University of Medicine and Pharmacy, Bucharest, Romania. A cross-sectional study was conducted on 878 dental students who reported their perception of the psychological and educational impact of this period by completing a Google Forms questionnaire. Collected data were statistically analyzed using Stata/IC 16. There was a severe psychological impact among the respondents, the levels of stress being perceived as high and very high (33.83%, n = 297; 28.59%, n = 251), similar to high and very high anxiety feelings (26.54%, n = 233; 24.26%, n = 213). Very high educational impact from the point of view of the acquisition of practical skills (48.52%, n = 426) and future professional perspectives (38.95%, n = 342) were recorded. While online theoretical learning ability was principally low (37.93%, n = 333) despite consistently modified time allocated to the individual study (44.35%, n = 389), most of the students evaluated the efficiency of lecturers in online courses as neutral (41.12%, n = 361). New dentistry teaching programs will have to be adopted taking into account the dynamics of the pandemic and its strong impact on our students, in order to improve both their wellbeing and the sustainability of dental education.