Investigating the effect of synthesis selection on O3-sodium layered oxide structural changes and electrochemical properties.

Transition metal (TM) layered oxides constitute a promising family of materials for use in Na-ion battery cathodes. Here O3-Na (Ni1/3Mn1/3Fe1/3) O2 was synthesised using optimised sol-gel and solid-state routes, and the physico- and electrochemical natures of the resulting materials were thoroughly studied. Significant differences in electrochemical behaviour were observed, and the use of in operando XRD determined this stemmed from the suppression of the P3 phase in the sol-gel material during cycling. This was attributable to differences in the degree of transition metal migration in the materials ensuing from the selection of synthetic route. This demonstrates that not only the choice of material, but also that of synthesis route, can have dramatic impact on the resulting structural and electrochemical nature, making such considerations critical in the future development of advanced Na-ion cathode materials.

Chloride-attachment atmospheric pressure photoionisation for the determination of short-chain chlorinated paraffins by gas chromatography-high-resolution mass spectrometry.

In this work, a new gas chromatography-high-resolution mass spectrometry (GC-HRMS) method based on atmospheric pressure photoionisation (APPI) has been developed for the accurate determination of short-chain chlorinated paraffins (SCCPs) as a reliable alternative to the established methods. To the best of our knowledge, this is the first time these compounds has been analysed by GC-MS using atmospheric pressure photoionisation (APPI). Efficient ionisation of SCCPs was achieved using the new GC-APPI source by the formation of [M+Cl]- adduct ions in negative ion mode using dopant-assisted APPI with a mixture of acetone/CCl4 (3:1, v/v). Operating at a resolution of 70,000 FWHM (full width at half maximum) and monitoring the [M+Cl]- adduct ions for each congener group, a selective determination of the SCCPs was achieved, avoiding isobaric interferences between homologue groups with different carbon chain length and chlorination degree. Moreover, the GC-APPI-HRMS response of each congener group was mainly influenced by its concentration and did not depend on the number of chlorine atoms in the molecule as occurs with the GC-MS methods based on the electron-capture negative ionisation (ECNI). Thus, the contribution of the different carbon and chlorine homologue groups in the SCCP mixtures was determined by the internal normalization method, and the quantification was performed independently of the chlorine content of the SCCP standard mixture employed. The developed GC-APPI-HRMS method offers some interesting advantages over the existing methods, particularly the possibility to quantify individual SCCP congener groups, the use of a simple calibration method for quantification, and an important time-saving in the data processing, especially over ECNI-based traditional methods. The GC-APPI-HRMS method allowed the determination of SCCPs at low concentration levels in fish samples with low method limits of detection (17-34 pg g-1 wet weight for total SCCPs), good precision (RSD < 7%) and trueness (relative error < 8%) and can be proposed as a reliable alternative of the established methods for the determination of these pollutants in environmental samples.

Desorption electrospray ionization-high resolution mass spectrometry for the analysis of unknown materials: The phytosanitary product case.

In this work, we tested the potential of desorption electrospray ionization-high resolution mass spectrometry (DESI-HRMS) for the analysis of unknown materials. To this end, our study focused on analyzing an unknown complex sample suspected of being an adulterated phytosanitary product or a fraud. A simple and fast sample manipulation procedure (filter paper impregnated with the sample) was used for the chemical characterization of the phytosanitary product by DESI-HRMS(/MS). Kendrick Mass Defect (KMD) analysis was used to process the DESI high-resolution mass spectral data, allowing the identification of a low molecular weight polymer (polyethylene glycol) and the detection of other ions, which did not follow polymer distributions. The characteristic isotope patterns of these ions suggested the presence of organometallic compounds. Accurate mass measurements, isotope pattern fits and the structural information obtained by DESI-MS/HRMS (wide isolation window) allowed identifying the presence of triphenyltin, a biocide extensively used for agricultural purposes and restricted by the European Commission, in the phytosanitary product. The concentration of triphenyltin in the sample was 35%, which corresponds to ∼12% expressed as weight of tin, 120 times higher than the maximum legislated level.

Investigation of sodium insertion-extraction in olivine NaxFePO4 (0 ≤x≤ 1) using first-principles calculations.

Olivine NaFePO4 has recently attracted the attention of the scientific community as a promising cathode material for Na-ion batteries. In this work we combine density functional theory (DFT) calculations and high resolution synchrotron X-ray diffraction (HRXRD) experiments to study the phase stability of NaxFePO4 along the whole range of sodium compositions (0 ≤x≤ 1). DFT calculations reveal the existence of two intermediate structures governing the phase stability at x = 2/3 and x = 5/6. This is in contrast to isostructural LiFePO4, which is a broadly used cathode in Li-ion batteries. Na2/3FePO4 and Na5/6FePO4 ground states both align vacancies diagonally within the ab plane, coupled to a Fe(2+)/Fe(3+) alignment. HRXRD data for NaxFePO4 (2/3 < x < 1) materials show common superstructure reflections up to x = 5/6 within the studied compositions. The computed intercalation voltage profile shows a voltage difference of 0.16 V between NaFePO4 and Na2/3FePO4 in agreement with the voltage discontinuity observed experimentally during electrochemical insertion.

Increased levels of dioxin-like substances in adipose tissue in patients with deep infiltrating endometriosis.

STUDY QUESTION: Are the levels of biologically active and the most toxic dioxin-like substances in adipose tissue of patients with deep infiltrating endometriosis (DIE) higher than in a control group without endometriosis? SUMMARY ANSWER: DIE patients have higher levels of dioxins and polychlorinated biphenyls (PCBs) in adipose tissue compared with controls without endometriosis. WHAT IS KNOWN ALREADY: Some studies have investigated the levels of dioxin-like substances, in serum samples, in patients with endometriosis, with inconsistent results. STUDY DESIGN, SIZE, DURATION: Case-control study including two groups of patients. The study group (DIE group) consisted of 30 patients undergoing laparoscopic surgery because of DIE. In all patients, an extensive preoperative work-up was performed including clinical exploration, magnetic resonance imaging (MRI) and transvaginal sonography. All patients with DIE underwent a confirmatory histological study for DIE after surgery. The non-endometriosis control group (control group), included the next consecutive patient undergoing laparoscopic surgery in our center due to adnexal benign gynecological disease (ovarian or tubal procedures other than endometriosis) after each DIE patient, and who did not present any type of endometriosis. PARTICIPANTS/MATERIALS, SETTING, METHODS: During the surgical procedure 1-2 g of adipose tissue from the omentum were obtained. Dioxin-like substances were analyzed in adipose tissue in DIE patients and controls without endometriosis. MAIN RESULTS AND THE ROLE OF CHANCE: The total toxic equivalence and concentrations of both dioxins and PCBs were significantly higher in patients with DIE in comparison with the control group (P < 0.05), mainly due to the significantly higher values of the two most toxic dioxins (2,3,7,8-tetrachlorodibenzo-p-dioxin [2,3,7,8-TCDD] and 1,2,3,7,8-pentachlorodibenzo-p-dioxin [1,2,3,7,8-PeCDD]) (P < 0.01 for each compound). The levels of furan 2,3,4,7,8-PeCDF were statistically higher in the DIE group compared with controls. Only four congeners of PCBs had toxic equivalence values and concentrations that were statistically higher in patients with DIE, but these included the most toxic and carcinogenic PCB-126 (PCB-114 P < 0.05; PCB-156 P < 0.05; PCB-189 P = 0.04; PCB-126 P < 0.01). LIMITATIONS, REASONS FOR CAUTION: Since few patients were recruited, the study is only exploratory. Our results need to be confirmed in larger and more heterogeneous population studies since environmental and even genetic factors involved in determining dioxins and PCBs widely vary in different countries. Furthermore, the strict eligibility criteria used may preclude generalization of the results to other populations and the surgery-based sampling frame may induce a selection bias. Finally, adipose tissue was obtained only from the omentum, and not from other adipose tissue of the body. WIDER IMPLICATIONS OF THE FINDINGS: Our results suggest a potential role of dioxin-like substances in the pathogenesis of DIE. Further studies are warranted to confirm our findings. STUDY FUNDING/COMPETING INTERESTS: None. TRIAL REGISTRATION NUMBER: Not applicable.

Understanding fungal functional biodiversity during the mitigation of environmentally dispersed pentachlorophenol in cork oak forest soils.

Pentachlorophenol (PCP) is globally dispersed and contamination of soil with this biocide adversely affects its functional biodiversity, particularly of fungi - key colonizers. Their functional role as a community is poorly understood, although a few pathways have been already elucidated in pure cultures. This constitutes here our main challenge - elucidate how fungi influence the pollutant mitigation processes in forest soils. Circumstantial evidence exists that cork oak forests in N. W. Tunisia - economically critical managed forests are likely to be contaminated with PCP, but the scientific evidence has previously been lacking. Our data illustrate significant forest contamination through the detection of undefined active sources of PCP. By solving the taxonomic diversity and the PCP-derived metabolomes of both the cultivable fungi and the fungal community, we demonstrate here that most strains (predominantly penicillia) participate in the pollutant biotic degradation. They form an array of degradation intermediates and by-products, including several hydroquinone, resorcinol and catechol derivatives, either chlorinated or not. The degradation pathway of the fungal community includes uncharacterized derivatives, e.g. tetrachloroguaiacol isomers. Our study highlights fungi key role in the mineralization and short lifetime of PCP in forest soils and provide novel tools to monitor its degradation in other fungi dominated food webs.

Mixed-mode liquid chromatography coupled to tandem mass spectrometry for the analysis of aminoglycosides in meat.

A novel LC-MS/MS method has been developed for the determination of 13 aminoglycoside antibiotics in meat products. Among the chromatographic columns tested, the mixed-mode Obelisc R provided the best performance. Electrospray has been used for the coupling of the LC and the effect of temperature on the ionization has been evaluated. The mass spectra of AGs have been studied in order to select the most adequate precursor and product ions for quantitation and confirmation in SRM mode, showing that the single charged [M+H](+) provided better precisions than the double charged [M+2H](2+). Accurate mass measurements have been performed in order to confirm the molecular composition of the product ions, allowing the establishment of a new mechanism for some product ions of STR and DHSTR. A sample treatment based on an extraction and a SPE clean-up has been applied to a wide variety of meat products such as frankfurters; sausages; and minced meat of pork, veal, and chicken. Method limits of quantitation in the low microgram per kilogram level (1-50 µg kg(-1)), precisions %RSD below 15 % and accuracies expressed as relative errors below 23 % have been obtained, making the proposed method suitable for routine analysis.

Survey of the occurrence of pharmaceuticals in Spanish finished drinking waters.

Fifty samples of finished drinking waters (FDWs) from Spain covering 12 million inhabitants were tested for 53 pharmaceuticals pertaining to 12 different Anatomical Therapeutic Chemical (ATC) classification system codes. The studied compounds are a combination of most commonly consumed pharmaceuticals with other barely reported in the literature. Five compounds, azithromycin, clarithromycin, erythromycin, sulfamethoxazole, and ibuprofen were tentatively identified by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in some samples (2 to 15 %), but only ibuprofen and azithromycin could be confirmed when analyzed by liquid chromatography-high-resolution mass spectrometry (LC-HRMS) with a quadrupole-Orbitrap instrument. Concentration levels of ibuprofen in the positive samples ranged from 12 to 17 ng/L (n = 6) while for azithromycin values from 5 to 9.5 ng/L (n = 3) were found. Ibuprofen fragmentation behaviour in different mass spectrometry instrument configurations (triple quadrupole, quadrupole-ion trap, and quadrupole-Orbitrap) was evaluated.

Linear and cyclic methylsiloxanes in air by concurrent solvent recondensation-large volume injection-gas chromatography-mass spectrometry.

In the present work, a simple and fast method for the analysis of linear and cyclic methylsiloxanes in ambient air based on active sampling combined with gas chromatography - mass spectrometry (GC-MS) was developed. The retention efficiency of five sampling sorbents (activated coconut charcoal, Carbopack B, Cromosorb 102, Cromosorb 106 and Isolute ENV+) was evaluated and Isolute ENV+ was found to be the most effective. A volume of 2700 L of air can be sampled without significant losses of the most volatile methylsiloxanes. To improve the sensitivity of the GC-MS method, concurrent solvent recondensation - large volume injection (CSR-LVI), using volumes up to 30 µl of sample extract, is proposed and limits of quantification down to 0.03-0.45 ng m(-3), good linearity (r>0.999) and precision (RSD %<9%) were obtained. The developed method was applied to the analysis of ambient air. Concentrations of linear and cyclic methylsiloxanes in indoor air ranging from 3.9 to 319 ng m(-3) and between 48 and 292668 ng m(-3), were obtained, respectively, while levels from 6 to 22 ng m(-3) for linear and between 2.2 and 439 ng m(-3) for cyclic methylsiloxanes in outdoor air from Barcelona (Spain), were found.

Atmospheric pressure ionization-tandem mass spectrometry of the phenicol drug family.

In this work, the mass spectrometry behaviour of the veterinary drug family of phenicols, including chloramphenicol (CAP) and its related compounds thiamphenicol (TAP), florfenicol (FF) and FF amine (FFA), was studied. Several atmospheric pressure ionization sources, electrospray (ESI), atmospheric pressure chemical ionization and atmospheric pressure photoionization were compared. In all atmospheric pressure ionization sources, CAP, TAP and FF were ionized in both positive and negative modes; while for the metabolite FFA, only positive ionization was possible. In general, in positive mode, [M + H](+) dominated the mass spectrum for FFA, while the other compounds, CAP, TAP and FF, with lower proton affinity showed intense adducts with species present in the mobile phase. In negative mode, ESI and atmospheric pressure photoionization showed the deprotonated molecule [M-H](-), while atmospheric pressure chemical ionization provided the radical molecular ion by electron capture. All these ions were characterized by tandem mass spectrometry using the combined information obtained by multistage mass spectrometry and high-resolution mass spectrometry in a quadrupole-Orbitrap instrument. In general, the fragmentation occurred via cyclization and losses or fragmentation of the N-(alkyl)acetamide group, and common fragmentation pathways were established for this family of compounds. A new chemical structure for the product ion at m/z 257 for CAP, on the basis of the MS(3) and MS(4) spectra is proposed. Thermally assisted ESI and selected reaction monitoring are proposed for the determination of these compounds by ultra high-performance liquid chromatography coupled to tandem mass spectrometry, achieving instrumental detection limits down to 0.1 pg.

Polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, paraffins and polybrominated diphenyl ethers in marine fish species from Ebro River Delta (Spain).

The results of a surveillance programme on the determination of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and short chain chlorinated paraffins (SCCPs) in marine fish and shellfish species which are fished, commercialised and consumed in the Ebro River Delta area (NE, Spain) are presented. The study included the analysis of five marine fish species (sardine, gilthead sea bream, conger, eel and flounder) and three shellfish species (murex, carpet shell and mussel) collected in 2012 in five fishing harbours near to this area. WHO-TEQ concentrations for PCDD/Fs and dioxin like PCBs (dl-PCBs) ranged from 0.03 to 0.31 pg WHO-TEQ2005PCDD/Fg(-1)wetweight (ww) and from 0.02 to 3.15 pg WHO-TEQ2005PCBg(-1)ww, respectively. All levels were below the maximum concentrations established by the EU Regulation. The PCBs and PCDD/Fs accumulation pattern found in the samples analysed showed a distribution typically reported for marine samples. For marker PCBs and PBDEs, concentration levels ranging from 929 to 57494 pg g(-1)ww and from 36.2 to 827 pg g(-1)ww were obtained, respectively, meanwhile for SCCPs levels were between 3.1 and 141 ng g(-1)ww. Finally, the trends in the levels of PCDD/F and dl-PCBs found from 2006 to 2012 in fish and shellfish species were studied. A slight decrease of PCDD/F and dl-PCB concentrations was found since 2006.

Automatic crystallographic characterization in a transmission electron microscope: applications to twinning induced plasticity steels and Al thin films.

A new automated crystallographic orientation mapping tool in a transmission electron microscope technique, which is based on pattern matching between every acquired electron diffraction pattern and precalculated templates, has been used for the microstructural characterization of nondeformed and deformed aluminum thin films and twinning-induced plasticity steels. The increased spatial resolution and the use of electron diffraction patterns rather than Kikuchi lines make this tool very appropriate to characterize fine grained and deformed microstructures.

Determination of naphthalene-derived compounds in apples by ultra-high performance liquid chromatography-tandem mass spectrometry.

Naphthylacetic acid, naphthyloxy acetic acid and naphthylacetamide belong to a group of synthetic substances known as "auxin-like" compounds which are used as growth regulators in vegetables and fruits due to their structure similarities with the indoleacetic acid, the most important plant auxin. This paper reports a selective, sensitive and fast ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for the determination of naphthylacetamide (NAD) and the isomers (α and ß) of naphthylacetic acid (NAA) and naphthyloxy acetic (NOA) acid in apple samples. A baseline separation between the respective isomers was achieved using an RP-Amide column with gradient elution. The UHPLC-MS/MS method developed, using electrospray and selected reaction monitoring (SRM) acquisition mode led to a reliable determination of these family of compounds in apple samples at low quantitation levels, down to 1.0 µg kg(-1) and 0.25 µg kg(-1) respectively. For confirmation of NAA accurate mass measurement is proposed giving at these conditions quantitation limits of 10 µg kg(-1) for this compound. The UHPLC-MS/MS method developed was used for the analysis of apple samples harvested in three different apple fields from Lleida (Spain) during the blooming period. NAD and NAA were found in samples collected during 4-5 weeks after application at concentrations between the quantification limits and 43 µg kg(-1) and 24 µg kg(-1), respectively.

Field amplified sample injection-capillary zone electrophoresis for the analysis of amprolium in eggs.

Veterinary medicines are widely administered to farm animals since they keep animals healthy at overcrowded conditions. Nevertheless the continuous administration of medicines to farm animals can frequently lead to the presence of residues of veterinary drugs in consumption products. Amprolium is a quaternary ammonium compound used in the treatment of coccidiosis. In this paper, a method based on CZE to analyze residues of amprolium in eggs was developed and validated for the first time. Parameters such as electrolyte type, concentration, and pH were optimized. In order to improve sensitivity, field-amplified sample injection (FASI) was used for in-line preconcentration after a quick and simple sample treatment based on SPE (Envi-Carb). During method-validation studies using egg samples, a matrix interference was found at the migration time of amprolium. This compound was identified as thiamine and confirmed by MS(n) experiments using CE coupled to MS (CE-MS) with an ion-trap mass analyzer. CZE conditions were reoptimized to separate thiamine from amprolium allowing the quantification of amprolium in eggs at concentrations down to 75 µg/kg, which are far below the MRL-legislated values.

The response of Mucor plumbeus to pentachlorophenol: a toxicoproteomics study.

Pentachlorophenol (PCP) represents a critical concern worldwide due to its toxicity and recalcitrance to degradation. The capacity of Mucor plumbeus to transform PCP into several detoxification metabolites, including tetrachlorohydroquinone and several phase II conjugates, was observed by LC-HRMS. The data obtained support the degradation pathway proposed previously. PCP effects in M. plumbeus, an unsequenced species, were investigated using a proteomics approach (bidimensional gel electrophoresis followed by MALDI TOF/TOF analyses). The mycelial proteins identified in the differentially accumulated spots allowed the identification of PCP responsive proteins. The presence of PCP increased the energy demand, altered the cell wall architecture and cytoskeleton and induced a significant stress response. The latter was emphasised by the up-accumulation of protein species associated with defence mechanisms (e.g. HSP70 and cytochrome c peroxidase). Overall the data produced corroborate the capability of PCP to uncouple oxidative-phosphorylation in mitochondria. Importantly, one of the identified mycelial protein species, a NAD- and Zn-dependent ADH, is likely to be involved in PCP degradation. Amongst the fungal secretome analysed, no putative PCP degradative enzymes were detected. This work constitutes the first toxicoproteomic study involving a Zygomycota fungus and the very first concerning the effect of PCP in a fungal proteome.

Analysis of linear and cyclic methylsiloxanes in sewage sludges and urban soils by concurrent solvent recondensation-large volume injection-gas chromatography-mass spectrometry.

Concurrent solvent recondensation-large volume injection (CSR-LVI) is a gas chromatography injection technique that is particularly suitable for determining volatile compounds. In the present work, we evaluated the applicability of this technique for the analysis of linear and cyclic methylsiloxanes in sewage sludges and soils after solvent extraction to prevent losses of low-molecular-weight compounds. The CSR-LVI injection method was optimised to achieve maximum sensitivity and good chromatographic peak shapes. A liner packed with deactivated glass wool and a 5 m × 0.32 mm I.D. uncoated fused-silica precolumn was used. This made it possible to inject extract volumes of up to 30 µl. Good linearity (r>0.9993) and precision (RSD <15%), with recoveries ranging from 80 to 100% and method limits of quantification from 0.03 to 0.4 ng g(-1) wet weight (0.04-1.5 ng g(-1) dry weight for sewage sludges and 0.01-0.5 ng g(-1) dry weight for soils) were obtained. The developed method was applied to the analysis of linear and cyclic methylsiloxanes in sewage sludges collected from several wastewater treatment plants in Catalonia (NE Spain) and urban soils from the city of Barcelona.

Ultra-high performance liquid chromatography-tandem mass spectrometry for the analysis of phenicol drugs and florfenicol-amine in foods.

A method based on ultra-high performance liquid chromatography (UHPLC) is proposed for the determination of chloramphenicol (CAP), its related compounds, thiamphenicol (TAP) and florfenicol (FF), and the polar metabolite florfenicol-amine (FFA), in animal-derived foods (chicken and pork meat, fish, prawns and honey). For the retention of FFA and its simultaneous analysis with the parent compounds a phenyl-hexyl column is proposed. A fast separation is achieved in less than 2 minutes using a methanol : acetic acid-ammonium acetate buffer (5 mM, pH 5) and gradient elution. Under these conditions, the FFA is retained at more than twice the dead volume, as recommended by the legislation. For the coupling with mass spectrometry, heated-electrospray (H-ESI) is used as ionisation source improving vaporization efficiency. To prevent interferences using selected-reaction monitoring (SRM) both quantitation and confirmation transitions were carefully selected. Two different sample treatments based on solid-phase extraction with mixed-mode cartridges for fish and meat products and hydrophilic-lipophilic-balanced cartridges for honey are proposed, providing limits of quantitation (LOQs) below µg kg(-1) level.

Non-aqueous capillary electrophoresis separation of fullerenes and C60 fullerene derivatives.

As the interest in the use of fullerene compounds in biomedical and cosmetic applications increases, so too does the need to develop methods for their determination and quantitation in such complex matrices. In this work, we studied the behavior of C60 and C70 fullerenes in non-aqueous capillary electrophoresis, as well as two C60 fullerene derivatives not previously reported by any electrophoretic method, N-methyl-fulleropyrrolidine and (1,2-methanofullerene C60)-61-carboxylic acid. The separation was performed using fused-silica capillaries with an I.D. of 50 µm and tetraalkylammonium salts, namely tetra-n-decylammonium bromide (200 mM) and tetraethylammonium bromide (40 mM), in a solvent mixture containing 6 % methanol and 10 % acetic acid in acetonitrile/chlorobenzene (1:1 v/v) as the background electrolyte. Detection limits, based on a signal-to-noise ratio of 3:1, were calculated, and values between 1 and 3.7 mg/L were obtained. Good run-to-run and day-to-day precisions on concentration were achieved with relative standard deviation lower than 15 %. For the first time, an electrophoretic technique has been applied for the analysis of C60 fullerene in a commercial cosmetic cream. A standard addition method was used for quantitation, and the result was compared with that obtained by analyzing the same cream by liquid chromatography coupled to mass spectrometry.

Analysis of linear and cyclic methylsiloxanes in water by headspace-solid phase microextraction and gas chromatography-mass spectrometry.

This paper proposes a new method for the analysis of linear and cyclic methylsiloxanes in water samples based on headspace-solid phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). The extraction efficiency of four commercially available SPME-fibres was evaluated and it was found that a 65 µm polydimethylsiloxane/divinylbenzene (PDMS/DVB) coating was the most suitable for the extraction of siloxanes. The method provided good linearity (r>0.999) and precision (RSD % <17%), and low limits of quantification ranging from 0.01 to 0.74 ng L(-1) for linear siloxanes and between 18 and 34 ng L(-1) for cyclic siloxanes. The HS-SPME-GC-MS method was applied to the analysis of linear and cyclic siloxanes in river waters from Catalonia (NE, Spain) and the results showed concentrations of linear and cyclic siloxanes ranging from 0.09 to 3.94 ng L(-1) and 22.2 to 58.5 ng L(-1), respectively.

Analysis of perfluorinated phosponic acids and perfluorooctane sulfonic acid in water, sludge and sediment by LC-MS/MS.

Residues of perfluorinated phosphonic acids (PFPAs) and perfluorooctane sulfonic acid (PFOS) were investigated in various Dutch surface waters, sludge and sediments. For this purpose, a liquid chromatographic (LC) method was optimized by testing several columns with different mobile phases. Atmospheric pressure chemical ionization (APCI) was chosen for the LC tandem mass spectrometry (MS/MS) analysis. An ion-pair reagent was added to the injection solvent to improve peak shape. Different solvents were studied for the extraction from solid samples. For clean-up and pre-concentration, weak anion-exchange solid-phase extraction cartridges were used. Water samples were extracted using the same cartridges. The method was used for screening PFPAs in the Dutch aquatic environment. PFPAs were not observed in sediment or sludge samples. PFOPA was found at 1 ng L(-1) in one surface water sample. PFOS was found at levels between 0.07 ng g(-1) and 48 ng g(-1) (dry weight) in sediments and sewage sludge samples. PFOS concentrations in surface water ranged from 3.3 ng L(-1) to 25.4 ng L(-1).