Environment-Friendly Preparation and Characterization of Multilayered Conductive PVP/Col/CS Composite Doped with Nanoparticles as Potential Nerve Guide Conduits.

Tissue engineering constitutes the most promising method of severe peripheral nerve injuries treatment and is considered as an alternative to autografts. To provide appropriate conditions during recovery special biomaterials called nerve guide conduits are required. An ideal candidate for this purpose should not only be biocompatible and protect newly forming tissue but also promote the recovery process. In this article a novel, multilayered biomaterial based on polyvinylpyrrolidone, collagen and chitosan of gradient structure modified with conductive nanoparticles is presented. Products were obtained by the combination of electrospinning and electrospraying techniques. Nerve guide conduits were subjected to FT-IR analysis, morphology and elemental composition study using SEM/EDS as well as biodegradation. Furthermore, their effect on 1321N1 human cell line was investigated by long-term cell culture. Lack of cytotoxicity was confirmed by XTT assay and morphology study. Obtained results confirmed a high potential of newly developed biomaterials in the field of nerve tissue regeneration with a special focus on injured nerves recovery.

Commercial-Scale Modification of NdFeB Magnets under Laser-Assisted Conditions.

Rare Earth elements (REE) such as NdFeB are commonly used to produce permanent magnets. Thanks to their superior properties, these materials are highly desirable for green energy applications such as wind power generators or electric cars. Currently, REEs are critical for the ongoing development of eco-friendly solutions in different industrial branches. The emerging issue of REE depletion has led to a need for new methods to enable the life cycle elongation, resistance to wear, and external factors improvement of NdFeB magnets. This can be achieved by advanced, nanostructured coating formation of magnet surfaces to increase their functionality and protect from humidity, pressure, temperature, and other factors. The aim of the following research was to develop a new, scalable strategy for the modification of NdFeB magnets using laser-assisted technique, also known as Laser cladding. For this purpose, four different micropowders were used to modify commercial NdFeB samples. The products were investigated for their morphology, structure, chemical composition, and crystallography. Moreover, magnetic flux density was evaluated. Our results showed that laser cladding constitutes a promising strategy for REE-based permanent magnets modification and regeneration and may help to improve durability and resistance of NdFeB components.

Evaluation of Physiochemical and Biological Properties of Biofunctionalized Mg-Based Implants Obtained via Large-Scale PEO Process for Dentistry Applications.

An increasing number of tooth replacement procedures ending with implant failure generates a great need for the delivery of novel biomedical solutions with appropriate mechanical characteristics that would mimic natural tissue and undergo biodegradation. This phenomenon constitutes a significant difficulty for scientists, since currently applied biomaterials dedicated for this purpose are based on stainless steel, Ti, and Ti and CoCr alloys. One of the most promising raw materials is magnesium, which has been proven to promote bone regeneration and accelerate the tissue healing process. Nevertheless, its high reactivity with body fluid components is associated with fast and difficult-to-control biocorrosion, which strongly limits the application of Mg implants as medical devices. The achievement of appropriate functionality, both physiochemical and biological, to enable the commercial use of Mg biomaterials is possible only after their superficial modification. Therefore, the obtainment of uniform, reproducible coatings increasing resistance to the aqueous environment of the human body combined with a nanostructured surface that enhances implant-cell behaviors is an extremely important issue. Herein, we present a successful strategy for the modification of Mg implants via the PEO process, resulting in the obtainment of biomaterials with lower corrosion rates and superior biological properties, such as the promotion of extracellular matrix formation and a positive impact on the proliferation of MG-63 cells. The implants were investigated regarding their chemical composition using the FT-IR and XRD methods, which revealed that MgO layer formation, as well as the incorporation of electrolyte components such as fluorine and silica, were responsible for the increased microhardness of the samples. An extensive study of the biomaterials' morphology confirmed that successful surface modification led to a microporous structure suitable for the attachment and proliferation of cells. The three-layer nature of the newly-formed coatings, typical for PEO modification, was confirmed via cross-section analysis. A biocorrosion and biodegradation study proved that applied modification increased their resistance to body fluids. The cell culture study performed herein confirmed that the correct adjustment of modification parameters results in a lack of cytotoxicity of the magnesium implants, cell proliferation enhancement, and improvement in extracellular matrix formation.

Removal of Phosphorus with the Use of Marl and Travertine and Their Thermally Modified Forms-Factors Affecting the Sorption Capacity of Materials and the Kinetics of the Sorption Process.

The paper presents new reactive materials, namely marl and travertine, and their thermal modifications and the Polonite® material, analyzing their phosphorus removal from water and wastewater by sorption. Based on the experimental data, an analysis of the factors influencing the sorption capacity of the materials, such as the material dose, pH of the initial solution, process temperature, surface structure, and morphology, was performed. Adsorption isotherms and maximum sorption capacities were determined with the use of the Langmuir, Freundlich, Langmuir-Freundlich, Tóth, Radke-Praunitz, and Marczewski-Jaroniec models. The kinetics of the phosphorus sorption process of the tested materials were described using reversible and irreversible pseudo-first order, pseudo-second order, and mixed models. The natural materials were the most sensitive to changes in the process conditions, such as temperature and pH. The thermal treatment process stabilizes the marl and travertine towards materials with a more homogeneous surface in terms of energy and structure. The fitted models of the adsorption isotherms and kinetic models allowed for an indication of a possible phosphorus-binding mechanism, as well as the maximum amount of this element that can be retained on the materials' surface under given conditions-raw marl (43.89 mg P/g), raw travertine (140.48 mg P/g), heated marl (80.44 mg P/g), heated travertine (282.34 mg P/g), and Polonite® (54.33 mg P/g).

Fungal Chitosan-Derived Biomaterials Modified with Kalanchoe pinnata as Potential Hemostatic Agents-Development and Characterization.

Massive blood loss is still a great challenge for modern medicine. To stop the hemorrhage during the surgery or after injury apart from suturing or electrocoagulation, the most efficient method of hemostasis restoration is the use of hemostatic agents. Although there are numerous products on the market, there is still a need for biomaterials that are capable of fast and efficient bleeding management without affecting wound closure or embolism. Chitosan is known for its hemostatic activity; however, its quite poor mechanical properties and heterogenous chemical composition still needs some improvements to become superior compared to biological adhesives. The following study deals with the preparation and evaluation of chitosan-derived natural biomaterials containing Kalanchoe pinnata extract with the potential application as a blood-clotting agent. The materials were obtained under microwave-assisted conditions in two different forms (granules/dressing), whose chemical structure and morphology were studied. Their antioxidant properties have been proven. The chitosan-derived hemostatic agents exhibited superior blood sorption abilities and lack of cytotoxicity to L929 mouse fibroblasts. The study also showed the differences in biological properties depending on their preparation method. The potential mechanism of action was proposed as well as their potential in hemostasis revival.