RESUMO
This work develops a technology for actuating droplets of any size without the requirement for high voltages or active control systems, which are typically found in competitive systems. The droplet actuation relies on two microelectrodes separated by a variable gap distance to generate an electrostatic gradient. The physical mechanism for the droplet motion is a combination of liquid dielectrophoresis and electrowetting. Investigating the system behavior as a function of the driving frequency identified the relative contribution of these two mechanisms and the optimum operating conditions. A fixed signal frequency of 0.5 kHz actuated various liquids and contaminants. Droplet actuation was demonstrated on several platforms, including linear, radial-symmetric, and bilateral-symmetric droplet motion. The electrode designs are scalable and can be fabricated on a flexible and optically transparent substrate: these key advancements will enable consumer applications that were previously inaccessible. A self-cleaning platform was also tested under laboratory conditions and on the road. This technology has significant potential in microfluidics and self-cleaning platforms, for example, in the automotive sector to clean body parts, camera covers, and sensors.
RESUMO
A vector network analyzer-based quasi-optical measurement system that is suitable for mapping electric field intensity and phase near to the surface of terahertz reflective optics is presented. The system uses a fixed five parabolic mirror and transmitter/receiver head arrangement that has the benefit of requiring only the sample to be swept during measurement. The system has been tested with a micromilled aluminum zone plate reflector used as an exemplar structure. The measured focal point of the zone plate reflector, at its designed frequency of 1 THz, is shown to correspond well to both finite difference time-domain simulations and analytical theory.
RESUMO
Nanosphere lithography, an inexpensive and high throughput technique capable of producing nanostructure (below 100 nm feature size) arrays, relies on the formation of a monolayer of self-assembled nanospheres, followed by custom-etching to produce nanometre size features on large-area substrates. A theoretical model underpinning the self-ordering process by centrifugation is proposed to describe the interplay between the spin speed and solution concentration. The model describes the deposition of a dense and uniform monolayer by the implicit contribution of gravity, centrifugal force and surface tension, which can be accounted for using only the spin speed and the solid/liquid volume ratio. We demonstrate that the spin recipe for the monolayer formation can be represented as a pathway on a 2D phase plane. The model accounts for the ratio of polystyrene nanospheres (300 nm), water, methanol and surfactant in the solution, crucial for large area uniform and periodic monolayer deposition. The monolayer is exploited to create arrays of nanoscale features using 'short' or 'extended' reactive ion etching to produce 30-60 nm (diameter) nanodots or 100-200 nm (diameter) nanoholes over the entire substrate, respectively. The nanostructures were subsequently utilized to create master stamps for nanoimprint lithography.
RESUMO
The first demonstration, to our knowledge, of near-field imaging using subwavelength plasmonic apertures with a terahertz quantum cascade laser source is presented. "Bull's-eye" apertures, featuring subwavelength circular apertures flanked by periodic annular corrugations were created using a novel fabrication method. A fivefold increase in intensity was observed for plasmonic apertures over plain apertures of the same diameter. Detailed studies of the transmitted beam profiles were undertaken for apertures with both planarized and corrugated exit facets, with the former producing spatially uniform intensity profiles and subwavelength spatial resolution. Finally, a proof-of-concept imaging experiment is presented, where an inhomogeneous pharmaceutical drug coating is investigated.
