First attempts to obtain a reference drift curve for traditional olive grove's plantations following ISO 22866.

The current standard for the field measurements of spray drift (ISO 22866) is the only official standard for drift measurements in field conditions for all type of crops, including bushes and trees. A series of field trials following all the requirements established in the standard were arranged in a traditional olive grove in Córdoba (south of Spain). The aims of the study were to evaluate the applicability of the current standard procedure to the particular conditions of traditional olive trees plantations, to evaluate the critical requirements for performing the tests and to obtain a specific drift curve for such as important and specific crop as olive trees in traditional plantations, considering the enormous area covered by this type of crop all around the world. Results showed that the field trials incur a very complex process due to the particular conditions of the crop and the very precise environmental requirements. Furthermore, the trials offered a very low level of repeatability as the drift values varied significantly from one spray application to the next, with the obtained results being closely related to the wind speed, even when considering the standard minimum value of 1 m·s-1. The collector's placement with respect to the position of the isolated trees was determined as being critical since this substantially modifies the ground deposit in the first 5 m. Even though, a new drift curve for olive trees in traditional plantation has been defined, giving an interesting tool for regulatory aspects. Conclusions indicated that a deep review of the official standard is needed to allow its application to the most relevant orchard/fruit crops.

Effect of sprayer settings on spray drift during pesticide application in poplar plantations (Populus spp.).

This study assessed spray drift generated by sprayer settings commonly used for pesticide application in poplar plantations (Populus spp.). Tests were conducted per the ISO 22866 methodology using a mounted air-assisted sprayer (Tifone VRP600) equipped with a swivel-cannon air conveyor (model Cannone 50S). Trials evaluated sprayer settings, combinations of nozzle types, airflow rates, and air direction in both adult and young poplar plantations. Overall, spray drift amounts registered downwind of poplar plantations were less than those obtained to derive reference drift curves during the EU Plant Protection Product registration process that used late-growth-stage fruit crops. In the adult poplar plantation, Venturi nozzles (TVI 8004 red) yielded the highest drift reductions compared to reference sprayer setting, especially at distances farthest from the sprayed area (86% between 40 and 47m). Highest total drift reductions were achieved when conventional nozzles (1.81mm ceramic disc-core) were combined with their spray direction modified for an inclined cannon spray unit. Alternatively, the young poplar plantation showed no drift reduction for distances farthest from the sprayed area, regardless of sprayer settings, which likely resulted from lower foliage density and widely-spaced rows. Yet, both Venturi nozzles combined with high fan flow rates and conventional nozzles combined with reduced fan flow rate showed total spray drift reductions of over 70% within the downwind sampling area. These experimental results represent the first set of data on spray drift amounts in poplar plantations, which is key for defining the reference curves and best practices to reduce spray drift in tall tree plantations.

Testing the Suitability of a Terrestrial 2D LiDAR Scanner for Canopy Characterization of Greenhouse Tomato Crops.

Canopy characterization is essential for pesticide dosage adjustment according to vegetation volume and density. It is especially important for fresh exportable vegetables like greenhouse tomatoes. These plants are thin and tall and are planted in pairs, which makes their characterization with electronic methods difficult. Therefore, the accuracy of the terrestrial 2D LiDAR sensor is evaluated for determining canopy parameters related to volume and density and established useful correlations between manual and electronic parameters for leaf area estimation. Experiments were performed in three commercial tomato greenhouses with a paired plantation system. In the electronic characterization, a LiDAR sensor scanned the plant pairs from both sides. The canopy height, canopy width, canopy volume, and leaf area were obtained. From these, other important parameters were calculated, like the tree row volume, leaf wall area, leaf area index, and leaf area density. Manual measurements were found to overestimate the parameters compared with the LiDAR sensor. The canopy volume estimated with the scanner was found to be reliable for estimating the canopy height, volume, and density. Moreover, the LiDAR scanner could assess the high variability in canopy density along rows and hence is an important tool for generating canopy maps.

Spray distribution evaluation of different settings of a hand-held-trolley sprayer used in greenhouse tomato crops.

BACKGROUND: Hand-held-trolley sprayers have recently been promoted to improve spray application techniques in greenhouses in south-eastern Spain. However, certain aspects remain to be improved. A modified hand-held-trolley sprayer was evaluated under two different canopy conditions (high and low canopy density) and with several sprayer settings (nozzle type, air assistance and spray volume). In this study, the deposition, coverage and uniformity of distribution of the spray on the canopy have been assessed. RESULTS: The deposition on leaves was significantly higher when flat-fan nozzles and air assistance were used at both high and low spray volumes. No differences were detected between the reference system at a high spray volume and the modified trolley at a low spray volume. Flat-fan nozzles with air assistance increased penetrability into the canopy. CONCLUSIONS: Air assistance and flat-fan nozzles allow volume rates to be reduced while maintaining or improving spray quality distribution. The working parameters of hand-held sprayers must be considered to reduce environmental risk and increase the efficacy of the spraying process. © 2015 Society of Chemical Industry.

Advanced technologies for the improvement of spray application techniques in spanish viticulture: an overview.

Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring spray drift in order to improve vineyard spraying and make it more sustainable. Some methods and geostatistical procedures for mapping vineyard parameters are proposed, and the development of a variable rate sprayer is described. All these technologies are interesting in terms of adjusting the amount of pesticides applied to the target canopy.

Use of a terrestrial LIDAR sensor for drift detection in vineyard spraying.

The use of a scanning Light Detection and Ranging (LIDAR) system to characterize drift during pesticide application is described. The LIDAR system is compared with an ad hoc test bench used to quantify the amount of spray liquid moving beyond the canopy. Two sprayers were used during the field test; a conventional mist blower at two air flow rates (27,507 and 34,959 m3·h(-1)) equipped with two different nozzle types (conventional and air injection) and a multi row sprayer with individually oriented air outlets. A simple model based on a linear function was used to predict spray deposit using LIDAR measurements and to compare with the deposits measured over the test bench. Results showed differences in the effectiveness of the LIDAR sensor depending on the sprayed droplet size (nozzle type) and air intensity. For conventional mist blower and low air flow rate; the sensor detects a greater number of drift drops obtaining a better correlation (r = 0.91; p < 0.01) than for the case of coarse droplets or high air flow rate. In the case of the multi row sprayer; drift deposition in the test bench was very poor. In general; the use of the LIDAR sensor presents an interesting and easy technique to establish the potential drift of a specific spray situation as an adequate alternative for the evaluation of drift potential.