Optical fiber sensors-based temperature distribution measurement in ex vivo radiofrequency ablation with submillimeter resolution.

Radiofrequency thermal ablation (RFTA) induces a high-temperature field in a biological tissue having steep spatial (up to 6°C∕mm) and temporal (up to 1°C∕s) gradients. Applied in cancer care, RFTA produces a localized heating, cytotoxic for tumor cells, and is able to treat tumors with sizes up to 3 to 5 cm in diameter. The online measurement of temperature distribution at the RFTA point of care has been previously carried out with miniature thermocouples and optical fiber sensors, which exhibit problems of size, alteration of RFTA pattern, hysteresis, and sensor density worse than 1 sensor∕cm. In this work, we apply a distributed temperature sensor (DTS) with a submillimeter spatial resolution for the monitoring of RFTA in porcine liver tissue. The DTS demodulates the chaotic Rayleigh backscattering pattern with an interferometric setup to obtain the real-time temperature distribution. A measurement chamber has been set up with the fiber crossing the tissue along different diameters. Several experiments have been carried out measuring the space-time evolution of temperature during RFTA. The present work showcases the temperature monitoring in RFTA with an unprecedented spatial resolution and is exportable to in vivo measurement; the acquired data can be particularly useful for the validation of RFTA computational models.

Fiber-optic chirped FBG for distributed thermal monitoring of ex-vivo radiofrequency ablation of liver.

A linearly chirped fiber Bragg grating (LCFBG) has been used as a temperature sensor for online monitoring of radiofrequency thermal ablation (RFTA). The LCFBG acts as a distributed sensor, with spatial resolution of 75 µm. A white-light setup that records the LCFBG spectrum estimates the temperature profile in real time. Three RFTA experiments have been performed ex-vivo on porcine liver measuring the radial temperature distribution during the heating process. The analysis of thermal maps quantifies the spatial heat distribution along the measurement axis and determines the ablation efficiency.

Fiber-optic combined FPI/FBG sensors for monitoring of radiofrequency thermal ablation of liver tumors: ex vivo experiments.

We present a biocompatible, all-glass, 0.2 mm diameter, fiber-optic probe that combines an extrinsic Fabry-Perot interferometry and a proximal fiber Bragg grating sensor; the probe enables dual pressure and temperature measurement on an active 4 mm length, with 40 Pa and 0.2°C nominal accuracy. The sensing system has been applied to monitor online the radiofrequency thermal ablation of tumors in liver tissue. Preliminary experiments have been performed in a reference chamber with uniform heating; further experiments have been carried out on ex vivo porcine liver, which allowed the measurement of a steep temperature gradient and monitoring of the local pressure increase during the ablation procedure.

Effect of hyperbarism on radiofrequency ablation outcome.

OBJECTIVE: Our objective was to investigate whether increases in atmospheric or local tissue pressure would affect the outcome of radiofrequency ablation procedures and the size of the created thermal lesions. MATERIALS AND METHODS: Thermal lesions were produced in specimens of explanted bovine liver inside a hyperbaric chamber at 101 (atmospheric), 141, 202, 273, and 364 kPa using radiofrequency power settings of 20, 30, 40, and 50 W. In subsequent in vivo experiments, thermal lesions were produced in the livers of anesthetized pigs with or without occlusion of the hepatic vein draining the ablation site. RESULTS: At each radiofrequency power setting, progressive increases in applied pressure were paralleled by decreases in minimum impedance and increases in maximum tissue temperatures at the electrode tip (reflecting tissue-fluid boiling points), delivery time, total energy delivered, and thermal lesion volumes. Similar increases were observed in radiofrequency ablation procedures performed in vivo under occlusion of the vein draining the ablation site. CONCLUSION: By elevating the tissue-fluid boiling point, increased pressure delays the desiccation of tissue in contact with the radiofrequency electrode tip and the related sharp increase in impedance. The result is prolonged delivery of larger amounts of radiofrequency energy and larger thermal lesions.