Surgeon-modified fenestrated endograft for urgent an aortic arch aneurysm: case report.

We report the case of an endovascular repair of an aortic arch aneurysm by a surgeon-modified fenestrated endograft with a single fenestration in a high-risk patient unfit for open surgery. A patient of 84 years, chronic ischemic cardiopathic, suffering from prostate adenocarcinoma in chemotherapy treatment, came to our hospital for post-traumatic fracture of the right femur. During the hospitalization, the patient exhibited dysphonia and respiratory disorders for several days, therefore, the patient performed Computed Tomography Angiography (CTA) that found the presence of voluminous aneurysm of the aortic arch with a maximum diameter of about 74 mm. The patient was treated with a hybrid-staged procedure; in the first instance, with a carotid-carotid-succlavium bypass to preserve the cerebral and upper limb vascularization and then, the procedure was completed by implanting the surgeon-modified fenestrated endograft with stent delivery to the patient with a fenestration on the anonymous trunk. This surgeon-modified fenestrated endograft was created by modifying a standard endograft by a single fenestration following the three-dimensional reconstructions of the CTA images. The procedure was successfully completed and postoperative course was uneventful. Computed Tomography Angiography demonstrated the exclusion of the aneurysm, patency of the implanted endograft modules, and absence of signs of endoleaks and / or cerebral or medullary ischemic complications.

Highly Reinforced Acrylic Resins for Hard Tissue Engineering and Their Suitability to Be Additively Manufactured through Nozzle-Based Photo-Printing.

Mineralized connective tissues represent the hardest materials of human tissues, and polymer based composite materials are widely used to restore damaged tissues. In particular, light activated resins and composites are generally considered as the most popular choice in the restorative dental practice. The first purpose of this study is to investigate novel highly reinforced light activated particulate dental composites. An innovative additive manufacturing technique, based on the extrusion of particle reinforced photo-polymers, has been recently developed for processing composites with a filler fraction (w/w) only up to 10%. The second purpose of this study is to explore the feasibility of 3D printing highly reinforced composites. A variety of composites based on 2,2-bis(acryloyloxymethyl)butyl acrylate and trimethylolpropane triacrylate reinforced with silica, titanium dioxide, and zirconia nanoparticles were designed and investigated through compression tests. The composite showing the highest mechanical properties was processed through the 3D bioplotter AK12 equipped with the Enfis Uno Air LED Engine. The composite showing the highest stiffness and strength was successfully processed through 3D printing, and a four-layer composite scaffold was realized. Mechanical properties of particulate composites can be tailored by modifying the type and amount of the filler fraction. It is possible to process highly reinforced photopolymerizable composite materials using additive manufacturing technologies consisting of 3D fiber deposition through extrusion in conjunction with photo-polymerization.

Toxic Effects on Thyroid Gland of Male Adult Lizards (Podarcis Siculus) in Contact with PolyChlorinated Biphenyls (PCBs)-Contaminated Soil.

Skin exposure is considered a potentially significant but little-studied pathway for PolyChlorinated Biphenyls uptake in terrestrial reptiles. In this study, a native Italian lizard, Podarcis siculus, was exposed to PCBs-contaminated soil for 120 days. Tissues distribution of PCBs, thyroid hormone levels, and thyroid histo-physiopathology were examined. The accumulation of PCBs in skin, plasma, liver, kidney, and brain were highest at 120 days. The alteration of triiodothyronine (T3) and thyroxine (T4) levels after different concentrations and times to exposure of PCBs was accompanied by the changes in the hormones involved in the hypothalamus-pituitary-thyroid (HPT) axis, namely Thyrotropin Releasing Hormone (TRH) and Thyroid Stimulating Hormone (TSH). Moreover, hepatic levels of deiodinase II (5'ORDII) and content of T3 were positively correlated to exposure to PCBs. These results indicated that in lizards, PCBs exposure through the skin has the potential to disrupt the thyroid endocrine system. Overall, the observed results indicate that PCBs could be associated with changes in thyroid homeostasis in these reptiles, through direct interactions with the metabolism of T4 and T3 through the HPT axis or indirect interactions with peripheral deiodination.

Fracture Strength and Failure Modes of Endodontically Treated Premolars Restored with Compact and Hollow Composite Posts Subjected to Cyclic Fatigue.

Physical and mechanical properties of continuous carbon or glass fiber reinforced endodontic posts are relevant to increase the retention and resistance of the tooth-restoration system. Hollow posts have been recently designed for delivering the luting cement through the post hole, thus enhancing the post-dentin interface by reducing the risk of air bubbles formation. Methods: Three type of endodontic posts, a carbon fiber hollow post, a glass fiber hollow post and a compact glass fiber post were investigated. Mechanical properties of these posts were assessed through bending tests. Teeth were subjected to fatigue cycling and the strength of restored teeth was detected through static tests. Failure modes were investigated through optical and scanning electron microscopy. Results show that composite posts increase the mechanical stability by more than 100% compared to premolars restored with particulate composite. Carbon fiber posts retain the highest strength (1467 N ± 304 N) among the investigated post and core restoration, but an unfavorable type of fracture has been observed, preventing the tooth re-treatment. Instead, more compliant posts (i.e., glass fiber reinforced composite, providing a strength of 1336 N ± 221 N), show a favorable mode of fracture that allows the re-treatment of teeth in the case that failure occurs. Glass fiber hollow posts show a good trade-off between strength and a favorable type of fracture.

Endovascular management of symptomatic deep vein thrombosis with combined approach.

The combined used of thrombectomy with direct intravenous thrombolytic infusion provided effective treatment of DVT and uncovered an underlying left common iliac vein stenosis, which was successfully managed by angioplasty and stenting.

Cuspal Deflection and Temperature Rise of MOD Cavities Restored through the Bulk-Fill and Incremental Layering Techniques Using Flowable and Packable Bulk-Fill Composites.

Background: The aim of this study was to investigate cuspal deflection caused by material shrinkage and temperature rise occurring in the pulp chamber during photopolymerization. The aim of this study was also to investigate the effect of flowable and packable bulk-fill composites on cuspal deflection occurring in mesio-occlusal-distal (MOD) cavities restored through the bulk-fill or through the incremental layering technique. Additionally, mechanical and thermal properties of bulk-fill composites were considered. Methods: Two bulk-fill composites (high-viscosity and low-viscosity), largely differing in material composition, were used. These composites were characterized through linear shrinkage and compressive test. Cuspal deformation during restoration of mesio-occlusal-distal cavities of human premolars was evaluated using both the bulk-fill and the incremental layering techniques. Temperature rise was measured through thermocouples placed 1 mm below the cavity floor. Results: Shrinkage of the flowable composite was significantly higher (p < 0.05) than that of packable composite, while mechanical properties were significantly lower (p < 0.05). For cusp distance variation, no significant difference was observed in cavities restored through both restorative techniques, while temperature rise values spanned from 8.2 °C to 11.9 °C. Conclusions: No significant difference in cusp deflection between the two composites was observed according to both the restorative techniques. This result can be ascribed to the Young's modulus suggesting that the packable composite is stiffer, while the flowable composite is more compliant, thus balancing the cusp distance variation. The light curing modality of 1000 mW/cm2 for 20 s can be considered thermally safe for the pulp chamber.

Hydrodynamic boost: a novel re-entry technique in subintimal angioplasty of below-the-knee vessels.

OBJECTIVES: To describe the hydrodynamic boost (HB) technique and report our preliminary results with this technique in the subintimal angioplasty of below-the-knee vessels. METHODS: HB was used in 23 cases (14 males, mean age 73 ± 12 years) of critical limb ischemia, with long chronic total occlusion of tibial arteries extended to the ankle level. The operator performs a manual injection of diluted contrast dye through a 4 F catheter into the subintimal space, close to the patent true distal lumen, in order to achieve a tear in the intimal flap and a connection with the true lumen. RESULTS: In 19/23 (83 %) cases, the HB was effective in creating a connection between the subintimal space and the true distal lumen and it was possible to advance a wire and to conclude the procedure. In 4/23 (17 %) lesions, the HB failed and the procedure was successfully completed by retrograde approach. No major complications occurred. Mean length between catheter tip and re-entry point was 8 ± 5 mm. CONCLUSIONS: HB seems to be a feasible, safe and effective re-entry technique in distal below-the-knee vessels. This method represents an easy option for re-entry that extends the possibility of antegrade approach to obtain a successful revascularization. KEY POINTS: • In subintimal angioplasty of below-the-knee vessel re-entry can represent a challenge. • Inability to re-enter may determine the failure of the revascularization procedure. • HB is a novel re-entry technique feasible in distal below-the-knee vessels. • HB may increase the success rate of antegrade approach. • In case of failure, retrograde approach remains feasible.