A Review on Heat Treatment of Cast Iron: Phase Evolution and Mechanical Characterization.

The isothermal heat treatment process has been identified as a unique process of fabricating exceptional graphite cast iron due to its remarkable mechanical properties, such as excellent machinability, toughness, and high level of ultimate tensile strength. Austempered ductile iron (ADI), ductile iron (DI), and gray cast iron (GCI), known as spheroidal cast irons, are viable alternative materials compared to traditional steel casting, as well as aluminum casting. The graphite nodules from the microstructures of DI, ADI, and GCI are consistently encompassed by acicular ferrite and carbon-saturated austenite in the matrix, forming a distinctive ausferritic structure. All these materials are extensively used in the fabrication of engine sleeves, engine blocks, valves, gears, and camshafts in the automobile sector. With relative motion and outward loads, these components are regularly exposed to surface contact. In this project, it was observed that austempering temperature and a shorter holding period could also be used to manufacture needle-like ferrite platelets for austempered ductile iron (ADI) and other graphite cast irons. To overcome the brittleness challenges and catastrophic failures encountered by applied loads in present-day applications, it is essential to comprehend the isothermal treatments, morphological behaviors, phase analyses, processing techniques, and mechanical properties needed to properly incorporate these materials into future designs. This review article provides detailed information on the characterization and relevant potential mechanisms of ADI, DI, and GCI.

Insight into the Role of Nanoparticles Shape Factors and Diameter on the Dynamics of Rotating Water-Based Fluid.

This article addresses the dynamic of three-dimensional rotating flow of Maxwell nanofluid across a linearly stretched sheet subject to a water-based fluid containing copper nanoparticles. Nanoparticles are used due to their fascinating features, such as exceptional thermal conductivity, which is crucial in modern nanotechnology and electronics. The primary goal of this comprehensive study is to examine the nanoparticles size and shape factors effect on the base fluid temperature. The mathematical model contains the governing equations in three dimensional partial differential equations form, and these equations transformed into dimensionless ordinary dimensional equations via suitable similarity transformation. The bvp4c technique is harnessed and coded in Matlab script to obtain a numerical solution of the coupled non-linear ordinary differential problem. It is observed that the greater input of rotating, Deborah number, and magnetic parameters caused a decline in the fluid primary and secondary velocities, but the nanoparticles concentration enhanced the fluid temperature. Further, a substantial increment in the nanofluid temperature is achieved for the higher nanoparticle's diameter and shape factors.

Bio-Convection Effects on Prandtl Hybrid Nanofluid Flow with Chemical Reaction and Motile Microorganism over a Stretching Sheet.

This study aims to determine the heat transfer properties of a magnetohydrodynamic Prandtl hybrid nanofluid over a stretched surface in the presence of bioconvection and chemical reaction effects. This article investigates the bio-convection, inclined magnetohydrodynamic, thermal linear radiations, and chemical reaction of hybrid nanofluid across stretching sheets. Also, the results are compared with the nanofluid flow. Moreover, the non-Newtonian fluid named Prandtl fluid is considered. Microfluidics, industry, transportation, the military, and medicine are just a few of the real-world applications of hybrid nanofluids. Due to the nonlinear and convoluted nature of the governing equations for the problem, similarity transformations are used to develop a simplified mathematical model with all differential equations being ordinary and asymmetric. The reduced mathematical model is computationally analyzed using the MATLAB software package's boundary value problem solver, Runge-Kutta-fourth-fifth Fehlberg's order method. When compared to previously published studies, it is observed that the acquired results exhibited a high degree of symmetry and accuracy. The velocity profiles of basic nanofluid and hybrid nanofluid are increased by increasing the Prandtl parameters' values, which is consistent with prior observations. Additionally, the concentration and temperature of simple and hybrid nanofluids increase with the magnetic parameter values.

Strain Rate Effect upon Mechanical Behaviour of Hydrogen-Charged Cycled NiTi Shape Memory Alloy.

The rate dependence of thermo-mechanical responses of superelastic NiTi with different imposed strain rates after cycling from 1 to 50 cycles under applied 10-5s-1, 10-4s-1 and 10-3s-1 strain rates, immersion for 3 h and ageing has been investigated. The loaded and unloaded as-received NiTi alloy under an imposed strain of 7.1% have shown an increase in the residual deformation at zero stress with an increase in strain rates. It has been found that after 13 cycles and hydrogen charging, the amount of absorbed hydrogen (291 mass ppm) was sufficient to cause the embrittlement of the tensile loaded NiTi alloy with 10-5s-1. However, no premature fracture has been detected for the imposed strain rates of 10-4s-1 and 10-3s-1. Nevertheless, after 18 cycles and immersion for 3 h, the fracture has occurred in the plateau of the austenite martensite transformation during loading with 10-4s-1. Despite the higher quantity of absorbed hydrogen, the loaded specimen with a higher imposed strain rate of 10-3s-1 has kept its superelasticity behaviour, even after 20 cycles. We attribute such a behaviour to the interaction between the travelling distance during the growth of the martensitic domains while introducing the martensite phase and the amount of diffused hydrogen.

Three-dimensional coupling between orthodontic bone remodeling and superelastic behavior of a NiTi wire applied for initial alignment.

PURPOSE: NiTi wires are considered as the most appropriate wires to be used during the initial phase of orthodontic treatment. This work presents a numerical method to simulate the coupling between the orthodontic appliance and bone remodeling, which are the two mechanisms responsible for the orthodontic tooth movement. METHODS: The superelastic behavior of a NiTi wire was integrated in a three-dimensional simulation model to reproduce the long-term bone remodeling coupled with tooth alignment using the finite element method. The orthodontic load was derived by deforming the superelastic wire in order to adopt itself to the original position of irregular teeth. Root form was extracted from cone beam tomography imaging files. RESULTS: As a result, the teeth were aligned while the wire was recovering its initial shape. The canine was intruded by 0.53 mm, while the neighboring teeth were extruded by 0.44 and 0.46 mm. When the wire was loaded, it generated a load of 4.6 N on the bracket bonded on the canine. This force was active during the first day of the treatment. Then, the force continued to decline until the end of the correction period. The decreasing load delivered from the wire affected the teeth displacements as observed in real situations. CONCLUSION: Despite the complexity of the presented numerical simulation, this procedure allowed the analysis of the orthodontic forces that were generated in the clinical experiments and of the biomechanical response of the periodontal support elements when using this kind of wire.