Fetal Weight Estimation Using Automated Fractional Limb Volume With 2-Dimensional Size Parameters in Diabetic Pregnancies.

OBJECTIVES: To examine the effect of adding automated fetal fractional limb volume (FLV) with conventional 2-dimensional (2D) fetal weight estimation procedures in a cohort of diabetic pregnancies. METHODS: A pilot study of diabetic pregnancies measured standard fetal biometry within 7 days of delivery. Fractional arm volume (AVol) and fractional thigh volume (TVol) soft tissue parameters were measured with a commercially available automated software utility (5D Limb Vol; Samsung Medison Co, Ltd, Seoul, Korea). Three conventional weight prediction models that included only 2D size parameters were compared to FLV models that included AVol or TVol. Estimated and actual birth weight (BW) were assessed for the mean percent difference ± standard deviation of the percent differences. Systematic errors were evaluated by the Student t test, and random errors were compared by the Pitman test for correlated variances. The proportion of neonates with estimated fetal weight within 10% of BW was compared between groups by the McNemar test. RESULTS: Ninety gravid women were enrolled with pregestational (26.7%) or gestational (73.3%) diabetes. All prediction models were accurate, with the exception of small underestimations by the model of Schild et al (-3.8%; Ultrasound Obstet Gynecol 2004; 23:30-35). Random errors for the AVol (6.2%) and TVol (6.9%) models were significantly more precise than the other 3 prediction models: Hadlock et al (7.8%; Am J Obstet Gynecol 1985; 151:333-337), INTERGROWTH-21st (8.0%; Ultrasound Obstet Gynecol 2017; 49:478-486), and Schild et al (8.6%; P < .01). The greatest proportion of cases with BW ±10% was also classified by the AVol (91.1%) and TVol (91.1%) models, followed by Hadlock (83.3%), INTERGROWTH-21st (78.9%), and Schild (76.7%) predictions. CONCLUSIONS: The addition of automated FLV measurements to conventional 2D biometry was associated with improved weight predictions in this cohort of diabetic pregnancies.

Fetal Weight Estimation Using Automated Fractional Limb Volume With 2-Dimensional Size Parameters: A Multicenter Study.

OBJECTIVES: To develop new fetal weight prediction models using automated fractional limb volume (FLV). METHODS: A prospective multicenter study measured fetal biometry within 4 to 7 days of delivery. Three-dimensional data acquisition included the automated FLV that was based on 50% of the humerus diaphysis (fractional arm volume [AVol]) or 50% of the femur diaphysis (fractional thigh volume [TVol]) length. A regression analysis provided population sample-specific coefficients to develop 4 weight estimation models. Estimated and actual birth weights (BWs) were compared for the mean percent difference ± standard deviation of the percent differences. Systematic errors were analyzed by the Student t test, and random errors were compared by the Pitman test. RESULTS: A total of 328 pregnancies were scanned before delivery (BW range, 825-5470 g). Only 71.3% to 72.6% of weight estimations were within 10% of actual BW using original published models by Hadlock et al (Am J Obstet Gynecol 1985; 151:333-337) and INTERGROWTH-21st (Ultrasound Obstet Gynecol 2017; 49:478-486). All predictions were accurate by using sample-specific model coefficients to minimize bias in making these comparisons (Hadlock, 0.4% ± 8.7%; INTERGROWTH-21st, 0.5% ± 10.0%; AVol, 0.3% ± 7.4%; and TVol, 0.3% ± 8.0%). Both AVol- and TVol-based models improved the percentage of correctly classified BW ±10% in 83.2% and 83.9% of cases, respectively, compared to the INTERGROWTH-21st model (73.8%; P < .01). For BW of less than 2500 g, all models slightly overestimated BW (+2.0% to +3.1%). For BW of greater than 4000 g, AVol (-2.4% ± 6.5%) and TVol (-2.3% ± 6.9%) models) had weight predictions with small systematic errors that were not different from zero (P > .05). For these larger fetuses, both AVol and TVol models correctly classified BW (±10%) in 83.3% and 87.5% of cases compared to the others (Hadlock, 79.2%; INTERGROWTH-21st, 70.8%) although these differences did not reach statistical significance. CONCLUSIONS: In this cohort, the inclusion of automated FLV measurements with conventional 2-dimensional biometry was generally associated with improved weight predictions.

Characterization of Placental Microvasculature Using Superb Microvascular Imaging.

Superb Microvascular Imaging (SMI; Canon Medical Systems, Tustin, CA) uses clutter suppression to extract flow signals at rapid frame rates, which provides high-resolution vessel-branching details without the need for contrast agents. The potential diagnostic benefits of SMI, as described in other areas of medicine, requires further exploration during pregnancy. In this pictorial essay, we demonstrate the complementary use of SMI compared to conventional Doppler ultrasound and how it may improve our ability to characterize placental microvascular patterns without the need for ultrasound contrast agents.

Impact of changes in maternal body composition on birth weight and neonatal fat mass in dichorionic twin pregnancies.

Background: Although the impact of gestational weight gain (GWG) on birth weight in twin pregnancies has been demonstrated, the specific components of GWG have not been delineated for twin gestations. Fetal body composition has been shown to be modifiable in singleton gestations based on nutritional intervention strategies and may prove to have similar modifications in twin gestations. Objective: We aimed to determine the relation of maternal body composition changes to birth weight, birth length, and neonatal fat mass (FM) in dichorionic-diamniotic twin pregnancies. Design: This is a prospective study of 20 women with twin gestations. Comparisons were made between body composition variables during each trimester and for the entire pregnancy and compared with the outcomes of birth weight, neonatal fat percentage, and birth length. Results: GWG within or above compared with below the IOM recommendations was associated with higher birth weights (P = 0.03, P = 0.04, respectively), but also with higher postpartum weight retention (P = 0.001). Total maternal protein gain over the pregnancy was positively associated with birth weight (P = 0.03). Changes in maternal fat-free mass (FFM), total body water (TBW), and FM from the first to the third trimester were not associated with either birth weight or neonatal FM percentage. However, maternal FM change from the second to the third trimester was significantly correlated to neonatal FM percentage (P = 0.02). Third trimester GWG and total protein gain were positively correlated with neonatal birth length (P = 0.02 and 0.03, respectively). Maternal FFM over all 3 trimesters showed a positive relation with neonatal birth length (P = 0.01). Conclusions: Significant increases in maternal protein are associated with greater birth weight and neonatal birth length. Protein accretion, in contrast to TBW and FM gains, may be the most critical component of maternal GWG in dichorionic twin gestations.

Estimated energy requirements increase across pregnancy in healthy women with dichorionic twins.

Background: Estimated energy requirement (EER) has not been defined for twin pregnancy. This study was designed to determine the EER of healthy women with dichorionic-diamniotic (DCDA) twin pregnancies. Objectives: We aimed to estimate energy deposition from changes in maternal body protein and fat; to measure resting energy expenditure (REE), physical activity level (PAL), and total energy expenditure (TEE) throughout pregnancy and postpartum; and to define the EER based on the sum of TEE and energy deposition for twin gestation. Design: This is a prospective study of 20 women with DCDA twin gestations. Maternal EER, energy deposition, REE, TEE, and PAL were obtained during the first, second, and third trimesters of pregnancy and immediately postpartum. A mixed-effects linear regression model for repeated measures with random intercept was used to test for the effects of BMI groups and time. Results: Gains in total body protein (mean ± SD: 2.1 ± 0.7 kg) and fat mass (5.9 ± 2.8 kg) resulted in total energy deposition of 67,042 ± 25,586 kcal between 0 and 30-32 weeks of gestation. REE increased 26% from 1392 ± 162 to 1752 ± 172 kcal/d across the 3 trimesters, whereas TEE increased 17% from 2141 ± 283 to 2515 ± 337 kcal/d. Physical activity decreased steadily throughout pregnancy. Reductions in physical activity did not compensate for the rise in REE and energy deposition, thus requiring an increase in dietary energy intake as pregnancy progressed. EER increased 29% from 2257 ± 325 kcal/d in the first trimester to 2941 ± 407 kcal/d in the second trimester, and stayed consistent at 2906 ± 350 kcal/d in the third trimester. Conclusion: Increased energy intake, on average ∼700 kcal/d in the second and third trimesters when compared with the first trimester, is required to support gestational weight gain and the rise in energy expenditure of DCDA twin pregnancies.

Prospective evaluation of the safety and feasibility of a pelvic floor dilator during active labor.

INTRODUCTION AND HYPOTHESIS: The objective was to assess the safety and feasibility of using a pelvic floor dilator during active labor to prevent injuries to the levator ani muscle (LAM) and perineum. METHODS: In a prospective pilot study, a pelvic floor dilator using soft pads was introduced into the vaginal canal to gradually expand the vagina, in 30 nulliparous women and in 10 controls. The primary outcomes were adverse events related to the device. Secondary outcomes were perineal lacerations after delivery, sonographically defined levator ani injury, hiatal area dimensions, and anal sphincter disruption, all at 12-20 weeks postpartum, and maximum pelvic floor dilation, time to achieve maximum dilation, and device retention rate. RESULTS: From October 2014 through November 2016, a total of 494 women were screened, and 61 consented to the study. Thirty women used the device and 27 returned for follow-up. No maternal or neonatal injuries were related to use of the dilator. The average maximum dilation of the vaginal canal was 7.4 cm (SD 0.7, range 5.5-8.0). Dilation time averaged 27 min (SD 13, range 5-60). Device insertion adjustment was needed in 13 out of 30 cases (43%). Similar rates of 3th-4th degree perineal lacerations were seen in both groups. Levator ani avulsion was diagnosed in 2 out of 27 (7%) in the device group and in 1 out of 9 (11%) in the control group (p = 0.2). The rate of partial injury in the device group was 2 out of 27 (7%) vs 2 out of 9 (22%) in the comparison group (p = 0.2). CONCLUSION: The use of the pelvic floor dilator during active labor is feasible. No safety issues were identified.