Furfuryl alcohol/tung oil matrix-based composites reinforced with bacterial cellulose fibres.

Polymeric materials have drastically changed the society in the last century. However, their non-renewable origin, together with their indiscriminate use and disposal, resulted in a huge accumulation of waste in the environment and raised a wide discussion about the emission of greenhouse gases, which must be considerably reduced to minimize global warming. Thus, the establishment of a consolidated production of polymers prioritizing the use of renewable sources of raw materials became a hot research topic. Vegetable oils are protagonists of this initiative, and their carbon-carbon double bonds are convenient reactive sites for chain growth polymerization reactions. However, typical vegetable oil-based homopolymers often do not display competitive thermo-mechanical properties, and the preparation of the corresponding copolymers and composites is therefore an interesting alternative strategy. Herein, the preparation of composites based on a tung oil/furfuryl alcohol co-continuous network reinforced with bacterial cellulose fibers is described. For this purpose, the cellulose nanofibers were suspended in furfuryl alcohol, and different amounts of the ensuing suspension were mixed with tung oil in the presence of trifluoroacetic acid as cationic initiator. Fourier-transform infrared spectroscopy analysis of all samples indicated the association of both tung oil and furfuryl alcohol in the final materials, with peaks belonging to cellulose superposed at the fingerprint regions of composites. Differential scanning calorimetry and thermogravimetry demonstrated an interesting relationship between the composition and the corresponding thermal properties, and the morphology of the materials was assessed by scanning electron microscopy (SEM), which revealed a homogeneous distribution of cellulosic fibers at lower concentrations. The results gathered here contribute to the development of original macromolecular materials exclusively based on the renewable platform.

The Prospering of Macromolecular Materials Based on Plant Oils within the Blooming Field of Polymers from Renewable Resources.

This paper provides an overview of the recent progress in research and development dealing with polymers derived from plant oils. It highlights the widening interest in novel approaches to the synthesis, characterization, and properties of these materials from renewable resources and emphasizes their growing impact on sustainable macromolecular science and technology. The monomers used include unmodified triglycerides, their fatty acids or the corresponding esters, and chemically modified triglycerides and fatty acid esters. Comonomers include styrene, divinylbenzene, acrylics, furan derivatives, epoxides, etc. The synthetic pathways adopted for the preparation of these materials are very varied, going from traditional free radical and cationic polymerizations to polycondensation reactions, as well as metatheses and Diels-Alder syntheses. In addition to this general appraisal, the specific topic of the use of tung oil as a source of original polymers, copolymers, and (nano)composites is discussed in greater detail in terms of mechanisms, structures, properties, and possible applications.

Monomers and Macromolecular Materials from Renewable Resources: State of the Art and Perspectives.

A progressively increasing concern about the environmental impacts of the whole polymer industry has boosted the design of less aggressive technologies that allow for the maximum use of carbon atoms, and reduced dependence on the fossil platform. Progresses related to the former approach are mostly based on the concept of the circular economy, which aims at a thorough use of raw materials, from production to disposal. The latter, however, has been considered a priority nowadays, as short-term biological processes can efficiently provide a myriad of chemicals for the polymer industry. Polymers from renewable resources are widely established in research and technology facilities from all over the world, and a broader consolidation of such materials is expected in a near future. Herein, an up-to-date overview of the most recent and relevant contributions dedicated to the production of monomers and polymers from biomass is presented. We provide some basic issues related to the preparation of polymers from renewable resources to discuss ongoing strategies that can be used to achieve original polymers and systems thereof.

Copolymers of xylan-derived furfuryl alcohol and natural oligomeric tung oil derivatives.

The utilization of vegetable oils as biological oligomers for the synthesis of macromolecular materials has considerably evolved in the last decades, opening the way for the preparation of sophisticated materials based on synthetic processes for the design of polymers with very specific applications. Tung oil (TO), easily obtained from the seeds of the Asian tung tree (Vernicia fordii), is a relatively cheap commodity that has as its main constituent (~85%) a peculiar natural oligomeric triglyceride structure in which each chain bears three conjugated unsaturations corresponding to α-eleostearic acid. Following a previous study based on the association of TO with furans for the preparation of linear and cross-linked structures based on the Diels-Alder click reaction, the present study deals with the cationic (co) polymerization of xylan-derived furfuryl alcohol (FA) with TO, in order to combine the high intrinsic flexibility of the crosslinked TO polymers with the stiffness of the FA resin, which should lead to fully bio-based crosslinked materials with a tunable glass transition. Three approaches were investigated using trifluoroacetic acid (TFA) in chloroform, viz. (i) combining crude TO and furfuryl alcohol, (ii) combining methyl α-eleostearate and furfuryl alcohol, and (iii) polymerizing furfuryl α-eleostearate itself. The polymerization reactions with varying TFA concentrations were followed by 1H NMR spectroscopy, and it was possible to get valuable information on mechanistic aspects. Also, higher concentrations of TFA were used to synthesize and isolate polymer networks, in order to understand their molecular characteristic as well as access their main thermal properties.

Thermally reversible nanocellulose hydrogels synthesized via the furan/maleimide Diels-Alder click reaction in water.

The study deals with the synthesis of thermally reversible hydrogels from modified cellulose nanofibers via the Diels-Alder "click" reaction in an aqueous medium. "Never-dried" cellulose fibres derived from hardwood were submitted to shearing and surface TEMPO-oxidation before being modified with furfurylamine. The ensuing pendant furan moieties were reacted with a water-soluble bismaleimide via Diels-Alder coupling at 65 °C to produce a hydrogel, whose deconstruction was induced by the corresponding retro-Diels-Alder reaction carried out at 95 °C. Differential scanning calorimetry and rheological measurement were used to characterize the hydrogels. These aqueous cellulosic materials should provide original applications in such areas as strong paper-based artefacts and biocompatible gels.

Enhancing strength and toughness of cellulose nanofibril network structures with an adhesive peptide.

The mechanical properties of cellulose nanofibrils network structure are essential for their applications in functional materials. In this work, an adhesive peptide consisting of just 11 amino acid residues with a hydrophobic core sequence of FLIVI (F - phenylalanine, L - leucine, I - isoleucine, V - valine) flanked by three lysine (K) residues was adsorbed to 2,2,6,6-Tetramethyl-1-piperidinyloxy radical (TEMPO) oxidized cellulose nanofibrils (TO-CNF). Composite films were prepared by solution casting from water suspensions of TO-CNF adsorbed with the adhesive peptide. The nanofibrils network structure of the composite was characterized by atomic force microscopy (AFM). The structure of the peptide in the composites and the interactions between TO-CNF and the peptide were studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The mechanical properties of the composites were characterized by tensile tests and dynamic mechanical analysis (DMA). With 6.3wt.% adhesive peptide adsorbed onto TO-CNF, the composite showed a modulus of 12.5±1.4GPa, a tensile strength of 344.5±(15.3)MPa, and a strain to failure of 7.8±0.4%, which are 34.4%, 48.8%, and 23.8% higher than those for neat TO-CNF, respectively. This resulted in significantly improved toughness (work to fracture) for the composite, 77% higher than that for the neat TO-CNF.

Furan-modified natural rubber: A substrate for its reversible crosslinking and for clicking it onto nanocellulose.

The conventional vulcanization process applied to elastomers is irreversible and hinders therefore their useful recycling. We demonstrate here that natural rubber can be reversibly crosslinked via the Diels-Alder coupling of furan and maleimide moieties. The furan-modified natural rubber used in this strategy was also exploited to bind it to maleimide-modified nanocellulose, thus generating a covalently crosslinked composite of these two renewable polymers.

Unravelling the distinct crystallinity and thermal properties of suberin compounds from Quercus suber and Betula pendula outer barks.

The main purpose of this study was to investigate the potential of suberin (a naturally occurring aromatic-aliphatic polyester ubiquitous to the vegetable realm) as a renewable source of chemicals and, in particular, to assess their physical properties. A comparison between cork and birch suberin fragments obtained by conventional depolymerisation processes (hydrolysis or methanolysis) is provided, focusing essentially on their thermal and crystallinity properties. It was found that suberin fragments obtained by the hydrolysis depolymerisation of birch had a high degree of crystallinity, as indicated by their thermal analysis and corroborated by the corresponding XRD diffractions, as opposed to hydrolysis-depolymerised cork suberin counterparts, which were essentially amorphous.

A Sustainable Route to a Terephthalic Acid Precursor.

A new synthetic pathway for the production of p-toluic acid has been developed starting from reagents derived from renewable resources. A Diels-Alder reaction between sorbic and acrylic acids is followed by a combined dehydrogenation/ decarboxylation process, providing p-toluic acid in high yields. This route permits to use milder conditions compared to other Diels-Alder approaches reported in the literature, and therefore can contribute to a more sustainable terephthalic acid production.

Surface grafting of cellulose nanocrystals with natural antimicrobial rosin mixture using a green process.

Surface functionalization of cellulose nanocrystals (CNCs) aims to improve their properties. The main objective of this study was the esterification of the surface of CNCs using nontoxic resin acids, rosin. The structural and morphological modifications of CNC nanorods were characterized by (13)C NMR and Fourier transform infrared spectroscopy, atomic force microscopy, and X-ray diffraction analyses. The properties of functionalized CNCs were evaluated by thermogravimetric analysis and contact-angle measurements. The results indicate that the esterification proceeded from the surface of the CNC. The antimicrobial activities of the modified and neat CNC were investigated; the rosin-grafted CNC exhibited a strong antibacterial activity against Gram-negative bacteria and a modest antibacterial activity against Gram-positive bacteria.

N-(furfural) chitosan hydrogels based on Diels-Alder cycloadditions and application as microspheres for controlled drug release.

In this study, chitosan was chemically modified by reductive amination in a two-step process. The synthesis of N-(furfural) chitosan (FC) was confirmed by FT-IR and (1)H NMR analysis, and the degrees of substitution were estimated as 8.3 and 23.8%. The cross-linkable system of bismaleimide (BM) and FC shows that FC shared properties of furan-maleimide chemistry. This system produced non-reversible hydrogel networks by Diels-Alder cycloadditions at 85 °C. The system composed of BM and FC (23.8% substitution) generated stronger hydrogel networks than those of FC with an 8.3% degree of substitution. Moreover, the FC-BM system was able to produce hydrogel microspheres. Environmental scanning electron microscopy revealed the surface of the microspheres to be non-porous with small protuberances. In water, the microspheres swelled, increasing their volume by 30%. Finally, microspheres loaded with methylene blue were able to release the dye gradually, obeying second-order kinetics for times less than 600 min. This behavior suggests that diffusion is governed by the relaxation of polymer chains in the swelled state, thus facilitating drug release outside the microspheres.

Recycling tires? Reversible crosslinking of poly(butadiene).

Furan-modified poly(butadiene) prepared by the thiol-ene click reaction is crosslinked with bismaleimides through the Diels-Alder reaction, giving rise to a novel recyclable elastomer. This is possible because of the thermal reversibility of the adducts responsible for the formation of the network. The use of this strategy provides the possibility to produce recyclable tires.

Sleeving nanocelluloses by admicellar polymerization.

This investigation reports the first application of admicellar polymerization to cellulose nanofibers in the form of bacterial cellulose, microfibrillated cellulose, and cellulose nanowhiskers using styrene and ethyl acrylate. The success of this physical sleeving was assessed by SEM, FTIR, and contact angle measurements, providing an original and simple approach to the modification of cellulose nanofibers in their pristine aqueous environment.

Multicenter validation study of pathologic response and tumor thickness at the tumor-normal liver interface as independent predictors of disease-free survival after preoperative chemotherapy and surgery for colorectal liver metastases.

BACKGROUND: To validate pathologic markers of response to preoperative chemotherapy as predictors of disease-free survival (DFS) after resection of colorectal liver metastases (CLM). METHODS: One hundred seventy-one patients who underwent resection of CLM after preoperative chemotherapy at 4 centers were studied. Pathologic response-defined as the proportion of tumor cells remaining (complete, 0%; major, <50%; minor, ≥50%) and tumor thickness at the tumor-normal liver interface (TNI) (<0.5 mm, 0.5 to <5 mm, ≥5 mm)-was assessed by a central pathology reviewer and local pathologists. RESULTS: Pathologic response was complete in 8% of patients, major in 49% of patients, and minor in 43% of patients. Tumor thickness at the TNI was <0.5 mm in 21% of patients, 0.5 to <5 mm in 56% of patients, and ≥5 mm in 23% of patients. On multivariate analyses, using either pathologic response or tumor thickness at TNI, pathologic response (P = .002, .009), tumor thickness at TNI (P = 0.015, <.001), duration of preoperative chemotherapy (P = .028, .043), number of CLM (P = .038, . 037), and margin (P = .011, .016) were associated with DFS. In a multivariate analysis using both parameters, tumor thickness at TNI (P = .004, .015), duration of preoperative chemotherapy (P = .025), number of nodules (P = .027), and margin (P = .014) were associated with DFS. Tumor size by pathology examination was the predictor of pathologic response. Predictors of tumor thickness at the TNI were tumor size and chemotherapy regimen. There was near perfect agreement for pathologic response (κ = .82) and substantial agreement (κ = .76) for tumor thickness between the central reviewer and local pathologists. CONCLUSIONS: Pathologic response and tumor thickness at the TNI are valid predictors of DFS after preoperative chemotherapy and surgery for CLM.

Simple green approach to reinforce natural rubber with bacterial cellulose nanofibers.

Natural rubber (NR) is a renewable polymer with a wide range of applications, which is constantly tailored, further increasing its utilizations. The tensile strength is one of its most important properties susceptible of being enhanced by the simple incorporation of nanofibers. The preparation and characterization of natural-rubber based nanocomposites reinforced with bacterial cellulose (BC) and bacterial cellulose coated with polystyrene (BCPS), yielded high performance materials. The nanocomposites were prepared by a simple and green process, and characterized by tensile tests, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM), and swelling experiments. The effect of the nanofiber content on morphology, static, and dynamic mechanical properties was also investigated. The results showed an increase in the mechanical properties, such as Young's modulus and tensile strength, even with modest nanofiber loadings.

Bevacizumab impairs hepatocyte proliferation after partial hepatectomy in a rabbit model.

BACKGROUND: Bevacizumab is used to treat patients with metastatic colorectal cancer, including those who will undergo liver surgery. The effects of this agent on the regenerative capacity of the liver are unclear. We used a rabbit model of partial hepatectomy to assess the effects of bevacizumab on hepatocyte replication and the expression of genes relevant to angiogenesis and proliferation. MATERIALS AND METHODS: Thirty rabbits underwent 28% hepatectomy. At the end of the procedure, animals were blindly randomized into two groups. A control group was injected i.v. with saline and the other group with bevacizumab at 50 mg/kg. Three rabbits from each group were sacrificed at days 2, 3, 5, 7 and 14 after hepatectomy. Livers were collected and processed. Hepatocyte proliferation was evaluated by Ki-67 immunostaining and apoptosis by caspase-3 activity. Gene expression of Vascular endothelial growth factor (VEGF), Hepatocyte growth factor (HGF) and Inhibitor α of nuclear factor-κB (IκBα) was determined by quantitative Reverse Transcription-Polymerase Chain Reaction (RT-PCR). RESULTS: Compared with controls, hepatocyte proliferation in bevacizumab-treated animals was decreased 1.8-fold at day 3, 1.6-fold at day 5 and 2.1-fold at day 14. Neoangiogenesis began after day 5, with a peak of VEGF mRNA evident at day 7 in both groups. Expression of IκBα, a transcriptional target of Nuclear Factor-κB, increased significantly from baseline only in the control group: at day 2, expression was 179% of the day 0 value in controls versus 112% in the bevacizumab group. Expression of HGF and caspase-3 was similar in the two groups and remained stable over time. CONCLUSION: A single i.v. injection of bevacizumab impaired hepatocyte proliferation in a rabbit model of partial hepatectomy.

A comparative study of patients with and without associated digestive surgery in a two-stage hepatectomy setting.

PURPOSE: The purpose of this study was to compare the feasibility and outcomes of two-stage hepatectomy in patients with or without accompanying digestive surgery. METHODS: We analyzed prospectively data from 56 patients with colorectal liver metastases undergoing two-stage hepatectomy between 1995 and 2009. Patients undergoing associated digestive resection (group I, n = 32) were compared with patients without associated digestive surgery (group II, n = 17). RESULTS: The feasibility rate was 87.5% (49 patients). Neither the type and extent of hepatectomy nor the type of chemotherapy administered differed between the two groups. The median interval between hepatectomies was 1.79 and 2.07 months for groups I and II, respectively (not significant). One patient (group I) died of liver failure after the second hepatectomy. Postoperative morbidity rates were comparable: 37.5% (group I) vs. 35.5% (group II) after the first hepatectomy and 46.9% (group I) vs. 52.9% (group II) after the second hepatectomy. The median hospital stay after the first hepatectomy was longer in group I (13.5 days) than in group II (10 days) (P < 0.01). Median follow-up was 54 months. The median overall survival (OS) was 45.8 months, and 3- and 5-year OS were 58 and 31%, respectively. Median OS was longer for group II (58 months) than for group I (34 months) (P = 0.048). CONCLUSIONS: Digestive tract resection associated with two-stage hepatectomy does not increase postoperative mortality or morbidity nor does it lead to delay in chemotherapy or a reduction in cycles administered. The need for digestive tract surgery should not affect the surgical management of two-stage hepatectomy patients.

Retroperitoneal vascular surgery for the treatment of giant growing teratoma syndrome.

OBJECTIVE: To evaluate whether an aggressive surgical policy, which included vascular surgery with standard retroperitoneal lymph node dissection (RPLND), would be justified for managing bulky retroperitoneal growing teratoma syndrome (GTS). METHODS: Data were collected retrospectively from a series of 12 patients who, from 1992 to 2010, underwent radical RPLND for bulky GTS (retroperitoneal mass≥10 cm in diameter). For complete resection, vascular procedures and nephrectomy were performed. RESULTS: Median tumor diameter was 100 mm before and 140 mm (range 100-300) after chemotherapy. Two patients underwent iterative RPLND. In addition to RPLND, patients underwent aortic section with aortic anastomosis (n=6), inferior vena cava resection (n=3), both the latter and the former (n=1), and aortic graft with left nephrectomy (n=2). There were no operative deaths; 3 patients had complications (25%), but none were related to extended procedures. The median hospital stay was 15 days. Median follow up was 59 months (range 10-162). One patient died of metastatic cutaneous melanoma 112 months after RPLND, 10 patients survived and are disease-free, and one patient had a para-aortic recurrence. CONCLUSION: A 100% complete resection rate, long-term survival, no mortality, and acceptable morbidity were achieved when vascular surgery and left nephrectomy were combined with standard RPLND for bulky GTS.

High-intensity focused ultrasound (HIFU)-assisted hepatic resection in an animal model.

BACKGROUND: Bleeding is the main cause of postoperative complications of hepatic surgery. To minimize intraoperative bleeding during hepatectomy, resections are generally carried out under hepatic vascular control despite the risk of liver dysfunction in patients with chronic liver disease. This study evaluates the feasibility and safety of high-intensity focused ultrasound (HIFU)-assisted hepatic resection during an open procedure in an animal model. METHODS: Three groups of 12-14-week-old Landrace pigs (n = 7/group) were used to evaluate HIFU-assisted liver resection (group A) vs liver resection with or without portal triad clamping (groups B and C). In each pig, liver resection was performed on the right and left paramedian lobes. The following were evaluated and compared in the 3 groups: total blood loss, blood loss/cm(2) of resection area, clip density, procedure duration, morbidity, and mortality. RESULTS: Median blood loss was significantly lower in group A than in group B (P = .02), and group C (P = .007). Median blood loss/cm(2) of resection area was 4.77 mL/cm² in group A, 11.35 mL/cm² in group B, 12.22 mL/cm² in Group C. Precoagulation resulted in sealing blood vessels <5 mm; therefore, median clip density during liver transection was 0.78 clip/cm² in group A, 1.61 clip/cm(2) in group B, and 1.57 clip/cm(2) in group C. Median duration of the surgical procedure was 12 min in group A, 21 min in group B, and 19 min in group C. CONCLUSIONS: HIFU-assisted hepatic resection during an open procedure in an animal model is safe, reduces bleeding, and allows real-time ultrasound guidance.