N-self-doped porous carbon derived from animal-heart as an electrocatalyst for efficient reduction of oxygen.

Biomass-derived nitrogen-self-doped carbon was prepared by a simple and green approach based on the direct pyrolysis of pork heart using KOH as an activation reagent at controlled temperatures (700-900 °C). The obtained samples displayed a specific surface area up to 1718.84 m2 g-1, high content of nitrogen (3.03%) and interconnected porous structure, which is able to expose abundant active sites and promote mass transfer. Electrochemical measurements showed that our catalyst possessed a high electrocatalytic activity for oxygen reduction reaction in alkaline solution that is equivalent to that of commercial Pt/C. The sample carbonized at 700 °C (PC-APHs-700) with the onset potential of 0.92 V and half-wave potential of 0.80 V possessed the highest concentrations of graphite and pyridine nitrogen and exhibited the best performance among the PC-APHs-T samples. In addition, PC-APHs-700 had a higher long-term stability and stronger methanol tolerance than commercial Pt/C. This work demonstrates that it is a promising approach to develop and utilize carbon materials with added value as effective metal-free cathode catalysts for alkaline fuel cells based on economic and environmental friendly renewable biomass.

Preparation of Reduced Graphene Oxide Aerogel and Its Adsorption for Pb(II).

In this study, reduced graphene oxide (rGO) aerogels were successfully prepared using a facile hydrothermal method and determined with Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area, and scanning electron microscopy. The rGO aerogels were used to remove Pb(II) from aqueous solution, and the adsorption performance of rGO aerogels was investigated. In addition, the adsorption-desorption cycle experiments were carried out to evaluate the recyclability and stability of rGO aerogels. The adsorption data were consistent with the pseudo-second-order kinetic model and Langmuir isotherm model. The experimental results showed that rGO aerogels have good adsorption capacity for Pb(II) and can be utilized for wastewater treatment.

Role of H2O2 dynamics in brassinosteroid-induced stomatal closure and opening in Solanum lycopersicum.

Brassinosteroids (BRs) are essential for plant growth and development; however, their roles in the regulation of stomatal opening or closure remain obscure. Here, the mechanism underlying BR-induced stomatal movements is studied. The effects of 24-epibrassinolide (EBR) on the stomatal apertures of tomato (Solanum lycopersicum) were measured by light microscopy using epidermal strips of wild type (WT), the abscisic acid (ABA)-deficient notabilis (not) mutant, and plants silenced for SlBRI1, SlRBOH1 and SlGSH1. EBR induced stomatal opening within an appropriate range of concentrations, whereas high concentrations of EBR induced stomatal closure. EBR-induced stomatal movements were closely related to dynamic changes in H(2)O(2) and redox status in guard cells. The stomata of SlRBOH1-silenced plants showed a significant loss of sensitivity to EBR. However, ABA deficiency abolished EBR-induced stomatal closure but did not affect EBR-induced stomatal opening. Silencing of SlGSH1, the critical gene involved in glutathione biosynthesis, disrupted glutathione redox homeostasis and abolished EBR-induced stomatal opening. The results suggest that transient H(2)O(2) production is essential for poising the cellular redox status of glutathione, which plays an important role in BR-induced stomatal opening. However, a prolonged increase in H(2)O(2) facilitated ABA signalling and stomatal closure.

Thermosensitive methyl cellulose-based injectable hydrogels for post-operation anti-adhesion.

Thermosensitive methyl cellulose (MC)-based injectable hydrogels for post-operation anti-adhesion were prepared by integrating polyethylene glycol (PEG), carboxymethyl cellulose (CMC) and chitosan sulfate (CS-SO3) with MC sols. The viscosity of the MC-based sols depended on the sol composition, especially the amount of CMC. The gelation temperature of the sols was tuned by adjusting the concentrations of K(+) and other components to obtain an MC-based sol that transformed to a gel at body temperature. The composition of the sol also affected the gel strength. Adding PEG decreased the repulsions between the CMC and CS-SO3 macromolecules and thus increased the gel strength. The efficacy of the MC-based injectable hydrogels as barriers for reducing postsurgical adhesions was evaluated using a rat cecal abrasion model. The PEG and CS-SO3 loaded MC-based injectable hydrogels were effective in reducing adhesion formation and reduced adhesiolysis difficulties.

A new rapid chemical route to prepare reduced graphene oxide using copper metal nanoparticles.

Copper metal nanoparticles were used as a reducing agent to reduce graphene oxide (GO). The reaction was complete in about 10 min and did not involve the use of any toxic reagents or acids that are typically used in the reduction of GO by Zn and Fe powders. The high reduction activity of the Cu nanoparticles, compared to Cu powder, may be the result of the formation of Cu2O nanoparticles. The effect of the mass ratio of the metal to GO for this reduction was also investigated. The reduction of the GO was verified by ultraviolet-visible absorption spectroscopy, x-ray diffraction, thermogravimetric analysis, Raman spectroscopy, x-ray photoelectron spectroscopy and transmission electron microscopy. After reduction, Cu2O supported on reduced GO was formed and showed superior catalytic ability for the degradation of a model dye pollutant, methylene blue.

Brassinosteroids induce plant tolerance against phenanthrene by enhancing degradation and detoxification in Solanum lycopersicum L.

Polycyclic aromatic hydrocarbons (PAHs) are toxic to both plants and animals. The enhancement of plant tolerance and detoxification capacity is important for the plant-based remediation of PAHs. Therefore, we investigated the effects of 24-epibrassinolide (EBR) on the metabolism of a three-ringed PAH (phenanthrene-PHE) and subsequent stress tolerance in tomato (Solanum lycopersicum L.) plants. Exposure to PHE (300 µM) for 21 d significantly decreased biomass and net CO(2) assimilation (P(n)) but induced photoinhibition, malondialdehyde (MDA), H(2)O(2) and antioxidant enzymes. Obvious ultrastructural alterations were observed in the PHE-treated root tip cells. Importantly, the foliar application of EBR (0.1 µM) significantly increased biomass, P(n) and antioxidant enzyme activities but decreased MDA and H(2)O(2) compared with PHE alone and saved the root cells from severe damage. The expression of detoxification genes (CYP90b3, GSH1, GST1), reduced glutathione (GSH) content and glutathione S-transferase activity in the EBR+PHE-treated plants were higher than those of PHE alone. Additionally, lower levels of PHE residues in the roots were observed as a result of EBR+PHE treatment. Taken together, our results strongly suggest an enhanced and coordinated detoxification and degradation of PHE by EBR.

A facile method to assemble PNIPAM-containing microgel photonic crystals.

Structural colors: Poly(N-isopropyl acrylamide) based microgel photonic crystals are fabricated by using a new method called "high-temperature-induced hydrophobic assembly". The assembling conditions affect the water content of the crystals, thus determining their structural color (see image). The obtained photonic crystals are sensitive to solvents, and the reversible changes in their color can be observed with the naked eye.

Characteristics of calcium sulfate/gelatin composite biomaterials for bone repair.

A novel hybrid biomaterial composed of calcium sulfate (CS) and gelatin (GEL) was prepared with the potential of being used as bone filler or scaffold owing to its osteoconduction. Such composite biomaterial, cross-linked or un-cross-linked, could provide a suitable absorbing rate and prevent the CS crystals migrating from the implant for tissue engineering. The structure of the composite was analyzed with infrared (IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results indicated that the crystal pattern of CS was affected by the addition of GEL. The GEL part affected the development of the CS dihydrate (CSD) crystal by slowing the conversion from CS hemihydrate (CSH) to CSD; thus, the composite actually contained CSD, CSH and GEL. The compressive strength of the CS/CLGEL composite was also investigated. The compressive strength was correlated to the weight proportions of CS in the CS/cross-linked GEL (CS/CLGEL) composite, and the highest compressive strength of 82 MPa was obtained for the composite containing 40 wt% CS. The in vitro absorption test and the SEM results showed that a porous scaffold was formed in situ with the absorption of CS in the CS/CLGEL composite in a certain time. Therefore, the CS/CLGEL composite material can be used as an in situ porous scaffold with a high initial mechanical strength, and the remaining porous GEL scaffold will enable further in-growth of cells. Human osteoblasts were cultured in contact with the CS/CLGEL composite and the primary results suggested that human osteoblasts could attach and spread on the surface of CS/CLGEL films. The preliminary animal model experiment was operated for assessing the potential of the CS/CLGEL composite as a biodegradable bone substitute. The primary results showed that the CS/CLGEL composite filler could promote new bone in-growth, which will stimulate further study.

Fabrication of calcium sulfate/PLLA composite for bone repair.

The bone-repairing composite material CS/PLLA was fabricated by mixing poly-L-lactic acid (PLLA) and calcium sulfate hemihydrate (CSH). The structure of the composite was analyzed with Infrared spectroscope, X-ray diffraction, and scanning electron microscope. The results indicated that the crystal pattern of calcium sulfate was affected by the addition of PLLA. PLLA part impacted the development of calcium sulfate dihydrate (CSD) crystal by slowing the conversion from CSH to CSD, so the composites are actually composed of CSH, CSD, and PLLA. The absorbing test in vitro showed that CS/PLLA composite absorbed more slowly than pure CS, suggesting the addition of PLLA can adjust the absorption rate of CS to meet different requirements. The pH value changes of the media had similar trends for different composites during the absorbing test of CS/PLLA samples in aqueous medium, which was connected to the absorption of calcium sulfate. The absorption of calcium sulfate in a certain time left a porous PLLA scaffold that will enable cells to further grow in. The surface of CS/PLLA pellets was inoculated with human osteoblasts, and the primary results showed that the osteoblasts could attach and spread on the surface, which will stimulate our desire for further study.