A computationally efficient method for approximating reliabilities in large-scale single-step genomic prediction.

BACKGROUND: In this study, computationally efficient methods to approximate the reliabilities of genomic estimated breeding values (GEBV) in a single-step genomic prediction model including a residual polygenic (RPG) effect are described. In order to calculate the reliabilities of the genotyped animals, a single nucleotide polymorphism best linear unbiased prediction (SNPBLUP) or a genomic BLUP (GBLUP), was used, where two alternatives to account for the RPG effect were tested. In the direct approach, the genomic model included the RPG effect, while in the blended method, it did not but an index was used to weight the genomic and pedigree-based BLUP (PBLUP) reliabilities. In order to calculate the single-step GBLUP reliabilities for the breeding values for the non-genotyped animals, a simplified weighted-PBLUP model that included a general mean and additive genetic effects with weights accounting for the non-genomic and genomic information was used. We compared five schemes for the weights. Two datasets, i.e., a small (Data 1) one and a large (Data 2) one were used. RESULTS: For the genotyped animals in Data 1, correlations between approximate reliabilities using the blended method and exact reliabilities ranged from 0.993 to 0.996 across three lactations. The slopes observed by regressing the reliabilities of GEBV from the exact method on those from the blended method were 1.0 for all three lactations. For Data 2, the correlations and slopes ranged, respectively, from 0.980 to 0.986 and from 0.91 to 0.96, and for the non-genotyped animals in Data 1, they ranged, respectively, from 0.987 to 0.994 and from 0.987 to 1, which indicate that the approximations were in line with the exact results. The best approach achieved correlations of 0.992 to 0.994 across lactations. CONCLUSIONS: Our results demonstrate that the approximated reliabilities calculated using our proposed approach are in good agreement with the exact reliabilities. The blended method for the genotyped animals is computationally more feasible than the direct method when RPG effects are included, particularly for large-scale datasets. The approach can serve as an effective strategy to estimate the reliabilities of GEBV in large-scale single-step genomic predictions.

Exploring the optimal strategy of imputation from SNP array to whole-genome sequencing data in farm animals.

Genotype imputation from BeadChip to whole-genome sequencing (WGS) data is a cost-effective method of obtaining genotypes of WGS variants. Beagle, one of the most popular imputation software programs, has been widely used for genotype inference in humans and non-human species. A few studies have systematically and comprehensively compared the performance of beagle versions and parameter settings of farm animals. Here, we investigated the imputation performance of three representative versions of Beagle (Beagle 4.1, Beagle 5.0, and Beagle 5.4), and the effective population size (Ne) parameter setting for three species (cattle, pig, and chicken). Six scenarios were investigated to explore the impact of certain key factors on imputation performance. The results showed that the default Ne (1,000,000) is not suitable for livestock and poultry in small reference or low-density arrays of target panels, with 2.47%-10.45% drops in accuracy. Beagle 5 significantly reduced the computation time (4.66-fold-13.24-fold) without an accuracy loss. In addition, using a large combined-reference panel or high-density chip provides greater imputation accuracy, especially for low minor allele frequency (MAF) variants. Finally, a highly significant correlation in the measures of imputation accuracy can be obtained with an MAF equal to or greater than 0.05.

Overview of Metabolomic Analysis and the Integration with Multi-Omics for Economic Traits in Cattle.

Metabolomics has been applied to measure the dynamic metabolic responses, to understand the systematic biological networks, to reveal the potential genetic architecture, etc., for human diseases and livestock traits. For example, the current published results include the detected relevant candidate metabolites, identified metabolic pathways, potential systematic networks, etc., for different cattle traits that can be applied for further metabolomic and integrated omics studies. Therefore, summarizing the applications of metabolomics for economic traits is required in cattle. We here provide a comprehensive review about metabolomic analysis and its integration with other omics in five aspects: (1) characterization of the metabolomic profile of cattle; (2) metabolomic applications in cattle; (3) integrated metabolomic analysis with other omics; (4) methods and tools in metabolomic analysis; and (5) further potentialities. The review aims to investigate the existing metabolomic studies by highlighting the results in cattle, integrated with other omics studies, to understand the metabolic mechanisms underlying the economic traits and to provide useful information for further research and practical breeding programs in cattle.

Genotype by climate zone interactions for fertility, somatic cell score, and production in Iranian Holsteins.

The objective of this study was to investigate genetic variation and genotype by environment (G × E) interactions for fertility (including age at first calving and calving interval), somatic cell score (SCS), and milk production traits for Iranian Holsteins. Different environments were defined based on the climatic zones (cold, semi-cold, and moderate) and considering the herd location. Data were collected between 2003 and 2018 by the National Animal Breeding Center of Iran (Karaj). Variance and covariance components and genetic correlations were estimated using 2 different models, which were analyzed using Bayesian methods. For both models, performance of traits in each climate were considered as different traits. Fertility traits were analyzed using a trivariate model. Furthermore, SCS and production traits were analyzed using trivariate random regression models (records in different climate zones considered as different traits). For the fertility traits, the largest estimates of heritability were observed in cold climate. Fertility performance was always better in cold environment. Genetic correlations between climatic zones ranged from 0.85 to 0.94. For daily measurements of SCS and production traits, heritability ranged from 0.031 to 0.037 and 0.069 to 0.209, respectively. Genetic variances were the highest in the semi-cold and moderate climates for the SCS and production traits, respectively. Furthermore, across the studied climates, 305-d genetic correlation ranged from 0.756 to 0.884 for SCS and from 0.925 to 0.957 for the production traits. The structure of genetic correlation within each climate indicated a negative correlation between early and late lactation for SCS, especially in the cold climate and for milk production in the moderate climate. For fat percentage, in all climatic zones, the lowest genetic correlations were observed between early and mid-lactation. In addition, for protein production in the cold climate, a negative correlation was observed between early and late lactation. Results indicated heterogeneous variance components for all the studied traits across various climatic zones. Estimated genetic correlations for SCS revealed that the genetic expression of animals may vary by climatic zone. Results indicated the existence of G × E interaction due to the climatic condition, only for SCS. Therefore, in Iranian Holsteins, the effect of G × E interactions should not be neglected, especially for SCS, as different sires might be optimal for use in different climatic zones.

Revealing New Candidate Genes for Teat Number Relevant Traits in Duroc Pigs Using Genome-Wide Association Studies.

The number of teats is related to the nursing ability of sows. In the present study, we conducted genome-wide association studies (GWAS) for traits related to teat number in Duroc pig population. Two mixed models, one for counted and another for binary phenotypic traits, were employed to analyze seven traits: the right (RTN), left (LTN), and total (TTN) teat numbers; maximum teat number on a side (MAX); left minus right side teat number (LR); the absolute value of LR (ALR); and the presence of symmetry between left and right teat numbers (SLR). We identified 11, 1, 4, 13, and 9 significant SNPs associated with traits RTN, LTN, MAX, TTN, and SLR, respectively. One significant SNP (MARC0038565) was found to be simultaneous associated with RTN, LTN, MAX and TTN. Two annotated genes (VRTN and SYNDIG1L) were located in genomic region around this SNP. Three significant SNPs were shown to be associated with TTN, RTN and MAX traits. Seven significant SNPs were simultaneously detected in two traits of TTN and RTN. Other two SNPs were only identified in TTN. These 13 SNPs were clustered in the genomic region between 96.10-98.09 Mb on chromosome 7. Moreover, nine significant SNPs were shown to be significantly associated with SLR. In total, four and 22 SNPs surpassed genome-wide significance and suggestive significance levels, respectively. Among candidate genes annotated, eight genes have documented association with the teat number relevant traits. Out of them, DPF3 genes on Sus scrofa chromosome (SSC) 7 and the NRP1 gene on SSC 10 were new candidate genes identified in this study. Our findings demonstrate the genetic mechanism of teat number relevant traits and provide a reference to further improve reproductive performances in practical pig breeding programs.

Genetic parameters and genomic prediction for feed intake recorded at the group and individual level in different production systems for growing pigs.

BACKGROUND: In breeding programs, recording large-scale feed intake (FI) data routinely at the individual level is costly and difficult compared with other production traits. An alternative approach could be to record FI at the group level since animals such as pigs are normally housed in groups and fed by a shared feeder. However, to date there have been few investigations about the difference between group- and individual-level FI recorded in different environments. We hypothesized that group- and individual-level FI are genetically correlated but different traits. This study, based on the experiment undertaken in purebred DanBred Landrace (L) boars, was set out to estimate the genetic variances and correlations between group- and individual-level FI using a bivariate random regression model, and to examine to what extent prediction accuracy can be improved by adding information of individual-level FI to group-level FI for animals recorded in groups. For both bivariate and univariate models, single-step genomic best linear unbiased prediction (ssGBLUP) and pedigree-based BLUP (PBLUP) were implemented and compared. RESULTS: The variance components from group-level records and from individual-level records were similar. Heritabilities estimated from group-level FI were lower than those from individual-level FI over the test period. The estimated genetic correlations between group- and individual-level FI based on each test day were on average equal to 0.32 (SD = 0.07), and the estimated genetic correlation for the whole test period was equal to 0.23. Our results demonstrate that by adding information from individual-level FI records to group-level FI records, prediction accuracy increased by 0.018 and 0.032 compared with using group-level FI records only (bivariate vs. univariate model) for PBLUP and ssGBLUP, respectively. CONCLUSIONS: Based on the current dataset, our findings support the hypothesis that group- and individual-level FI are different traits. Thus, the differences in FI traits under these two feeding systems need to be taken into consideration in pig breeding programs. Overall, adding information from individual records can improve prediction accuracy for animals with group records.

Prediction of breeding values for group-recorded traits including genomic information and an individually recorded correlated trait.

Records on groups of individuals could be valuable for predicting breeding values when a trait is difficult or costly to measure on single individuals, such as feed intake and egg production. Adding genomic information has shown improvement in the accuracy of genetic evaluation of quantitative traits with individual records. Here, we investigated the value of genomic information for traits with group records. Besides, we investigated the improvement in accuracy of genetic evaluation for group-recorded traits when including information on a correlated trait with individual records. The study was based on a simulated pig population, including three scenarios of group structure and size. The results showed that both the genomic information and a correlated trait increased the accuracy of estimated breeding values (EBVs) for traits with group records. The accuracies of EBV obtained from group records with a size 24 were much lower than those with a size 12. Random assignment of animals to pens led to lower accuracy due to the weaker relationship between individuals within each group. It suggests that group records are valuable for genetic evaluation of a trait that is difficult to record on individuals, and the accuracy of genetic evaluation can be considerably increased using genomic information. Moreover, the genetic evaluation for a trait with group records can be greatly improved using a bivariate model, including correlated traits that are recorded individually. For efficient use of group records in genetic evaluation, relatively small group size and close relationships between individuals within one group are recommended.

The relative effect of genomic information on efficiency of Bayesian analysis of the mixed linear model with unknown variance.

This work focuses on the effects of variable amount of genomic information in the Bayesian estimation of unknown variance components associated with single-step genomic prediction. We propose a quantitative criterion for the amount of genomic information included in the model and use it to study the relative effect of genomic data on efficiency of sampling from the posterior distribution of parameters of the single-step model when conducting a Bayesian analysis with estimating unknown variances. The rate of change of estimated variances was dependent on the amount of genomic information involved in the analysis, but did not depend on the Gibbs updating schemes applied for sampling realizations of the posterior distribution. Simulation revealed a gradual deterioration of convergence rates for the locations parameters when new genomic data were gradually added into the analysis. In contrast, the convergence of variance components showed continuous improvement under the same conditions. The sampling efficiency increased proportionally to the amount of genomic information. In addition, an optimal amount of genomic information in variance-covariance matrix that guaranty the most (computationally) efficient analysis was found to correspond a proportion of animals genotyped ***0.8. The proposed criterion yield a characterization of expected performance of the Gibbs sampler if the analysis is subject to adjustment of the amount of genomic data and can be used to guide researchers on how large a proportion of animals should be genotyped in order to attain an efficient analysis.

Impact of the Order of Legendre Polynomials in Random Regression Model on Genetic Evaluation for Milk Yield in Dairy Cattle Population.

The random regression test-day model has become the most commonly adopted model for routine genetic evaluations in dairy populations, which allows accurately accounting for genetic and environmental effects over lactation. The objective of this study was to explore appropriate random regression test-day models for genetic evaluation of milk yield in a Holstein population with a relatively small size, which is the common situation in regional or independent breeding companies to preform genetic evaluation. Data included 419,567 test-day records from 54,417 cows from the first lactation. Variance components and breeding values were estimated using a random regression test-day model with different orders (from first to fifth) of Legendre polynomials (LP) and accounted for homogeneous or heterogeneous residual variance across the lactation. Models were compared based on Akaike information criterion (AIC), Bayesian information criterion (BIC), and predictive ability. In general, models with a higher order of LP showed better goodness of fit based on AIC and BIC values. However, models with third, fourth, and fifth order of LP led to similar estimates of genetic parameters and predictive ability. Models with assumption of heterogeneous residual variances achieved better goodness of fit but yielded similar predictive ability compared with those with assumption of homogeneous residual variances. Therefore, a random regression model with third order of LP is suggested to be an appropriate model for genetic evaluation of milk yield in local Chinese Holstein populations.

Bias in estimates of variance components in populations undergoing genomic selection: a simulation study.

BACKGROUND: After the extensive implementation of genomic selection (GS), the choice of the statistical model and data used to estimate variance components (VCs) remains unclear. A primary concern is that VCs estimated from a traditional pedigree-based animal model (P-AM) will be biased due to ignoring the impact of GS. The objectives of this study were to examine the effects of GS on estimates of VC in the analysis of different sets of phenotypes and to investigate VC estimation using different methods. Data were simulated to resemble the Danish Jersey population. The simulation included three phases: (1) a historical phase; (2) 20 years of conventional breeding; and (3) 15 years of GS. The three scenarios based on different sets of phenotypes for VC estimation were as follows: (1) Pheno1: phenotypes from only the conventional phase (1-20 years); (2) Pheno1 + 2: phenotypes from both the conventional phase and GS phase (1-35 years); (3) Pheno2: phenotypes from only the GS phase (21-35 years). Single-step genomic BLUP (ssGBLUP), a single-step Bayesian regression model (ssBR), and P-AM were applied. Two base populations were defined: the first was the founder population referred to by the pedigree-based relationship (P-base); the second was the base population referred to by the current genotyped population (G-base). RESULTS: In general, both the ssGBLUP and ssBR models with all the phenotypic and genotypic information (Pheno1 + 2) yielded biased estimates of additive genetic variance compared to the P-base model. When the phenotypes from the conventional breeding phase were excluded (Pheno2), P-AM led to underestimation of the genetic variance of P-base. Compared to the VCs of G-base, when phenotypes from the conventional breeding phase (Pheno2) were ignored, the ssBR model yielded unbiased estimates of the total genetic variance and marker-based genetic variance, whereas the residual variance was overestimated. CONCLUSIONS: The results show that neither of the single-step models (ssGBLUP and ssBR) can precisely estimate the VCs for populations undergoing GS. Overall, the best solution for obtaining unbiased estimates of VCs is to use P-AM with phenotypes from the conventional phase or phenotypes from both the conventional and GS phases.

A Transcriptomic Study of the Tail Fat Deposition in Two Types of Hulun Buir Sheep According to Tail Size and Sex.

Hulun Buir sheep of similar genetic background were divided into two lines based on tail types: Small- and big fat-tailed. To explore the molecular mechanism of fat deposition in sheep tails, we firstly evaluated the morphology and transcription level differences of tail fat between these two lines. RNA-Seq technology was used to identify differentially expressed genes (DEGs) in phenotypic extremes of tail sizes. Five comparisons were performed taking into account two factors, sex and tail type. We screened out 373 DEGs between big-tailed and small-tailed Hulun Buir sheep, and 775 and 578 DEGs between two types of tails in male and female sheep, respectively. The results showed an obvious sex difference in the fat metabolism in sheep based on gene ontology (GO), pathway, and network analyses. Intriguingly, there were two different co-expression networks only respectively shown in male and female sheep, which were insulin-related network acting on upstream pathways and PPARG-related network effect in downstream pathways. Furthermore, these two networks were linked by a classic pathway of regulating adipogenesis. This is the first study to investigate the sex differences of fat metabolism in domestic animals, and it demonstrates a new experimental way to study fat metabolism. Our findings will provide theoretical background in understanding the tail-size phenotype in sheep and can be exploited in breeding small-tailed sheep.

Use of Repeated Group Measurements with Drop Out Animals for Variance Component Estimation and Genetic Evaluation: A Simulation Study.

The efficiency of feed utilization plays an important role in animal breeding. However, measuring feed intake (FI) is costly on an individual basis under practical conditions. Using group measurements to model FI could be practically feasible and cost-effective. The objectives of this study were to develop a random regression model based on repeated group measurements with consideration of missing phenotypes caused by drop out animals. Focus is on variance components (VC) estimation and genetic evaluation, and to investigate the effect of group composition on VC estimation and genetic evaluation using simulated datasets. Data were simulated based on individual FI in a pig population. Each individual had measurement on FI at 6 different time points, reflecting 6 different weeks during the test period. The simulated phenotypes consisted of additive genetic, permanent environment, and random residual effects. Additive genetic and permanent environmental effects were both simulated and modeled by first order Legendre polynomials. Three grouping scenarios based on genetic relationships among the group members were investigated: (1) medium within and across pen genetic relationship; (2) high within group relationship; (3) low within group relationship. To investigate the effect of the drop out animals during test period, a proportion (15%) of animals with individual phenotypes was set as the drop out animals, and two drop out scenarios within each grouping scenario were assessed: (1) animals were randomly dropped out; (2) animals with lower phenotypes were dropped out based on the ranking at each time point. The results show that using group measurements yielded similar VCs estimates but with larger SDs compared with the corresponding scenario of using individual measurements. Compared to scenarios without drop out, similar VC estimates were observed when animals were dropped out randomly, whereas reduced VC estimates were observed when animals were dropped out by the ranking of phenotypes. Different grouping scenarios produced similar VC estimates. Compared to scenarios without drop out, there were no loss of accuracies of genetic evaluation for drop out scenarios. However, dropping out animals by the ranking of phenotypes produced larger bias of estimated breeding values compared to the scenario without dropped out animals and scenario of dropping out animals by random. In conclusion, with an optimized group structure, the developed model can properly handle group measurements with drop out animals, and can achieve comparable accuracy of genetic evaluation for traits measured at the group level.

Genome-wide association studies revealed candidate genes for tail fat deposition and body size in the Hulun Buir sheep.

Fat-tailed sheep have a unique characteristic of depositing fat in their tails. In the present study, we conducted genome-wide association studies (GWAS) on traits related to tail fat deposition and body size in the Hulun Buir sheep. A total number of 300 individuals belonging to two fat-tailed lines of the Hulun Buir sheep breed genotyped with the Ovine Infinium HD SNP BeadChip were included in the current study. Two mixed models, one for continuous and one for binary phenotypic traits, were employed to analyse ten traits, that is, body length (BL), body height (BH), chest girth (CG), tail length (TL), tail width (TW), tail circumference (TC), carcass weight (CW), tail fat weight (TF), ratio of CW to TF (RCT) and tail type (TT). We identified 7, 6, 7, 2, 10 and 1 SNPs significantly associated with traits TF, CW, RCT, TW, TT and CG, respectively. Their associated genomic regions harboured 42 positional candidate genes. Out of them, 13 candidate genes including SMURF2, FBF1, DTNBP1, SETD7 and RBM11 have been associated with fat metabolism in sheep. The RBM11 gene has already been identified in a previous study on signatures of selection in this specific sheep population. Two more genes, that is, SMARCA5 and GAB1 were associated with body size in sheep. The present study has identified candidate genes that might be implicated in tail fat deposition and body size in sheep.

Distribution of runs of homozygosity in Chinese and Western pig breeds evaluated by reduced-representation sequencing data.

Inbreeding, which has several causes including genetic drift, population bottlenecks, mating of close relatives and selection, can leave tracts of runs of homozygosity (ROH) along genomes. Recently, decreasing performance on reproductive traits, which might have resulted from inbreeding, has been observed in Chinese pigs. In this study, 830 individuals from Western and Chinese pig breeds were genotyped using the reduced-representation sequencing method. After imputation and quality control, 60 850 high-confidence SNPs were retained for ROH detection. A simulation was performed to explore the reliability of ROH detection with imputed data. Different ROH-related variables were compared between imputed and non-missing genotypes used in ROH detection. Furthermore, ROH islands were evaluated and annotated to find genes influenced by inbreeding in these pigs. The simulation results showed that imputed data with 0.7 as the average missing genotype rate and three heterozygotes allowed in a sliding window have comparable ROH detected compared with data with no missing genotypes. Compared with Western pig breeds, Chinese pigs had more autosomes covered by ROH longer than 5 Mb, indicating higher inbreeding in Chinese pigs in recent times. Genes related to reproduction, immunity, meat quality and adaptability in Chinese pigs and several genes related to growth speed and immunity in Western pigs were observed in short ROH islands. The reproduction-related gene PRM1 was found to be located in the most frequent long ROH island in Chinese pigs, which might explain the decreasing fertility in Chinese pig breeds.

A predictive model of equivalent temperature index for dairy cattle (ETIC).

Thermal stress imposed on cows adversely affects health and productivity. Various thermal indices exist in the literature that can be used to assess the level of heat stress on cattle by linking environmental conditions with physiological responses. However, many of these indices either do not incorporate all of the environmental variables or may consider only the main effects of the independent variables without considering the interaction effects. The objective of this study was to develop a thermal index for dairy cattle, referred to as Equivalent Temperature Index for Cattle (ETIC), which incorporates air temperature, relative humidity, air velocity and solar radiation and their interactions. Environmental and physiological data from two studies were pooled together to develop and validate the proposed index. The index (ETIC) expressed in terms of temperature units is derived from equivalent air temperature of relative humidity, air velocity and solar radiation. ETIC heat-stress level thresholds were defined according to the thresholds for temperature-humidity index (THI). The results indicate that the ETIC model predicts the measured physiological responses very well. The coefficient of correlation, R2, for skin temperature, core-body temperature, and respiration rate were 0.79, 0.40, and 0.49, respectively. The ETIC prediction of skin temperatures, core-body temperatures, and respiration rates were better compared to that of three recently developed thermal indices (adjusted THI, heat load index, and comprehensive climate index). The proposed index could be a useful tool to assess thermal environments to ensure animal comfort.

The impact of genomic relatedness between populations on the genomic estimated breeding values.

In genomic selection, prediction accuracy is highly driven by the size of animals in the reference population (RP). Combining related populations from different countries and regions or using a related population with large size of RP has been considered to be viable strategies in cattle breeding. The genetic relationship between related populations is important for improving the genomic predictive ability. In this study, we used 122 French bulls as test individuals. The genomic estimated breeding values (GEBVs) evaluated using French RP, America RP and Chinese RP were compared. The results showed that the GEBVs were in higher concordance using French RP and American RP compared with using Chinese population. The persistence analysis, kinship analysis and the principal component analysis (PCA) were performed for 270 French bulls, 270 American bulls and 270 Chinese bulls to interpret the results. All the analyses illustrated that the genetic relationship between French bulls and American bulls was closer compared with Chinese bulls. Another reason could be the size of RP in China was smaller than the other two RPs. In conclusion, using RP of a related population to predict GEBVs of the animals in a target population is feasible when these two populations have a close genetic relationship and the related population is large.

Comparison on genomic predictions using three GBLUP methods and two single-step blending methods in the Nordic Holstein population.

BACKGROUND: A single-step blending approach allows genomic prediction using information of genotyped and non-genotyped animals simultaneously. However, the combined relationship matrix in a single-step method may need to be adjusted because marker-based and pedigree-based relationship matrices may not be on the same scale. The same may apply when a GBLUP model includes both genomic breeding values and residual polygenic effects. The objective of this study was to compare single-step blending methods and GBLUP methods with and without adjustment of the genomic relationship matrix for genomic prediction of 16 traits in the Nordic Holstein population. METHODS: The data consisted of de-regressed proofs (DRP) for 5,214 genotyped and 9,374 non-genotyped bulls. The bulls were divided into a training and a validation population by birth date, October 1, 2001. Five approaches for genomic prediction were used: 1) a simple GBLUP method, 2) a GBLUP method with a polygenic effect, 3) an adjusted GBLUP method with a polygenic effect, 4) a single-step blending method, and 5) an adjusted single-step blending method. In the adjusted GBLUP and single-step methods, the genomic relationship matrix was adjusted for the difference of scale between the genomic and the pedigree relationship matrices. A set of weights on the pedigree relationship matrix (ranging from 0.05 to 0.40) was used to build the combined relationship matrix in the single-step blending method and the GBLUP method with a polygenetic effect. RESULTS: Averaged over the 16 traits, reliabilities of genomic breeding values predicted using the GBLUP method with a polygenic effect (relative weight of 0.20) were 0.3% higher than reliabilities from the simple GBLUP method (without a polygenic effect). The adjusted single-step blending and original single-step blending methods (relative weight of 0.20) had average reliabilities that were 2.1% and 1.8% higher than the simple GBLUP method, respectively. In addition, the GBLUP method with a polygenic effect led to less bias of genomic predictions than the simple GBLUP method, and both single-step blending methods yielded less bias of predictions than all GBLUP methods. CONCLUSIONS: The single-step blending method is an appealing approach for practical genomic prediction in dairy cattle. Genomic prediction from the single-step blending method can be improved by adjusting the scale of the genomic relationship matrix.