A locally solvent-tethered polymer electrolyte for long-life lithium metal batteries.

Solid polymer electrolytes exhibit enhanced Li+ conductivity when plasticized with highly dielectric solvents such as N,N-dimethylformamide (DMF). However, the application of DMF-containing electrolytes in solid-state batteries is hindered by poor cycle life caused by continuous DMF degradation at the anode surface and the resulting unstable solid-electrolyte interphase. Here we report a composite polymer electrolyte with a rationally designed Hofmann-DMF coordination complex to address this issue. DMF is engineered on Hofmann frameworks as tethered ligands to construct a locally DMF-rich interface which promotes Li+ conduction through a ligand-assisted transport mechanism. A high ionic conductivity of 6.5 × 10-4 S cm-1 is achieved at room temperature. We demonstrate that the composite electrolyte effectively reduces the free shuttling and subsequent decomposition of DMF. The locally solvent-tethered electrolyte cycles stably for over 6000 h at 0.1 mA cm-2 in Li | |Li symmetric cell. When paired with sulfurized polyacrylonitrile cathodes, the full cell exhibits a prolonged cycle life of 1000 cycles at 1 C. This work will facilitate the development of practical polymer-based electrolytes with high ionic conductivity and long cycle life.

A Large-Scale Fabrication of Flexible, Ultrathin, and Robust Solid Electrolyte for Solid-State Lithium-Sulfur Batteries.

All-solid-state lithium metal batteries (ASSLMBs) are considered as the most promising candidates for the next-generation high-safety batteries. To achieve high energy density in ASSLMBs, it is essential that the solid-state electrolytes (SSEs) are lightweight, thin, and possess superior electrochemical stability. In this study, a feasible and scalable fabrication approach to construct 3D supporting skeleton using an electro-blown spinning technique is proposed. This skeleton not only enhances the mechanical strength but also hinders the migration of Li-salt anions, improving the lithium-ion transference number of the SSE. This provides a homogeneous distribution of Li-ion flux and local current density, promoting uniform Li deposition. As a result, based on the mechanically robust and thin SSEs, the Li symmetric cells show outstanding Li plating/stripping reversibility. Besides, a stable interface contact between SSE and Li anode has been established with the formation of an F-enriched solid electrolyte interface layer. The solid-state Li|sulfurized polyacrylonitrile (Li|SPAN) cell achieves a capacity retention ratio of 94.0% after 350 cycles at 0.5 C. Also, the high-voltage Li|LCO cell shows a capacity retention of 92.4% at 0.5 C after 500 cycles. This fabrication approach for SSEs is applicable for commercially large-scale production and application in high-energy-density and high-safety ASSLMBs.

In Situ Construction of a Multifunctional Interphase Enabling Continuous Capture of Unstable Lattice Oxygen Under Ultrahigh Voltages.

The use of nickel-rich layered materials as cathodes can boost the energy density of lithium batteries. However, developing a safe and long-term stable nickel-rich layered cathode is challenging primarily due to the release of lattice oxygen from the cathode during cycling, especially at high voltages, which will cause a series of adverse effects, leading to battery failure and thermal runaway. Surface coating is often considered effective in capturing active oxygen species; however, its process is rather complicated, and it is difficult to maintain intact on the cathode with large volume changes during cycling. Here, we propose an in situ construction of a multifunctional cathode/electrolyte interphase (CEI), which is easy to prepare, repairable, and, most importantly, capable of continuously capturing active oxygen species during the entire life span. This unique protective mechanism notably improves the cycling stability of Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) cells at rigorous working conditions, including ultrahigh voltage (4.8 V), high temperature (60 °C), and fast charging (10 C). An industrial 1 A h graphite||NCM811 pouch cell achieved stable operation of 600 cycles with a capacity retention of 79.6% at 4.4 V, exhibiting great potential for practical use. This work provides insightful guidance for constructing a multifunctional CEI to bypass limitations associated with high-voltage operations of nickel-rich layered cathodes.

Chlorine bridge bond-enabled binuclear copper complex for electrocatalyzing lithium-sulfur reactions.

Engineering atom-scale sites are crucial to the mitigation of polysulfide shuttle, promotion of sulfur redox, and regulation of lithium deposition in lithium-sulfur batteries. Herein, a homonuclear copper dual-atom catalyst with a proximal distance of 3.5 Å is developed for lithium-sulfur batteries, wherein two adjacent copper atoms are linked by a pair of symmetrical chlorine bridge bonds. Benefiting from the proximal copper atoms and their unique coordination, the copper dual-atom catalyst with the increased active interface concentration synchronously guide the evolutions of sulfur and lithium species. Such a delicate design breaks through the activity limitation of mononuclear metal center and represents a catalyst concept for lithium-sulfur battery realm. Therefore, a remarkable areal capacity of 7.8 mA h cm-2 is achieved under the scenario of sulfur content of 60 wt.%, mass loading of 7.7 mg cm-2 and electrolyte dosage of 4.8 µL mg-1.

Constructing Bipolar Dual-Active Sites through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox.

It remains a significant challenge to construct active sites to break the trade-off between oxidation and reduction processes occurring in battery cathodes with conversion mechanism, especially for the oxygen reduction and evolution reactions (ORR/OER) involved in the zinc-air batteries (ZABs). Here, using a high-entropy-driven electric dipole transition strategy to activate and stabilize the tetrahedral sites is proposed, while enhancing the activity of octahedral sites through orbital hybridization in a FeCoNiMnCrO spinel oxide, thus constructing bipolar dual-active sites with high-low valence states, which can effectively decouple ORR/OER. The FeCoNiMnCrO high-entropy spinel oxide with severe lattice distortion, exhibits a strong 1s→4s electric dipole transition and intense t2g(Co)/eg(Ni)-2p(OL) orbital hybridization that regulates the electronic descriptors, eg and t2g, which leads to the formation of low-valence Co tetrahedral sites (Coth) and high-valence Ni octahedral sites (Nioh), resulting in a higher half-wave potential of 0.87 V on Coth sites and a lower overpotential of 0.26 V at 10 mA cm-2 on Nioh sites as well as a superior performance of ZABs compared to low/mild entropy spinel oxides. Therefore, entropy engineering presents a distinctive approach for designing catalytic sites by inducing novel electromagnetic properties in materials across various electrocatalytic reactions, particularly for decoupling systems.

Unraveling the Coupling Effect between Cathode and Anode toward Practical Lithium-Sulfur Batteries.

The localized reaction heterogeneity of the sulfur cathode and the uneven Li deposition on the Li anode are intractable issues for lithium-sulfur (Li-S) batteries under practical operation. Despite impressive progress in separately optimizing the sulfur cathode or Li anode, a comprehensive understanding of the highly coupled relationship between the cathode and anode is still lacking. In this work, inspired by the Butler-Volmer equation, a binary descriptor (IBD ) assisting the rational structural design of sulfur cathode by simultaneously considering the mass-transport index (Imass ) and the charge-transfer index (Icharge ) is identified, and subsequently the relationship between IBD and the morphological evolution of Li anode is established. Guided by the IBD , a scalable electrode providing interpenetrated flow channels for efficient mass/charge transfer, full utilization of active sulfur, and mechanically elastic support for aggressive electrochemical reactions under practical conditions is reported. These characteristics induce a homogenous distribution of local current densities and reduced reaction heterogeneity on both sides of the cathode and anode. Impressive energy density of 318 Wh kg-1 and 473 Wh L-1 in an Ah-level pouch cell can be achieved by the design concept. This work offers a promising paradigm for unlocking the interaction between cathode and anode and designing high-energy practical Li-S batteries.

Band Structure Engineering and Orbital Orientation Control Constructing Dual Active Sites for Efficient Sulfur Redox Reaction.

The kinetics difference among multistep electrochemical processes leads to the accumulation of soluble polysulfides and thus shuttle effect in lithium-sulfur (Li-S) batteries. While the interaction between catalysts and representative species has been reported, the root of the kinetics difference, interaction change among redox reactions, remains unclear, which significantly impedes the catalysts design for Li-S batteries. Here, this work deciphers the interaction change among electrocatalytic sulfur reactions, using tungsten disulfide (WS2 ) a model system to demonstrate the efficiency of modifying electrocatalytic selectivity via dual-coordination design. Band structure engineering and orbital orientation control are combined to guide the design of WS2 with boron dopants and sulfur vacancies (B-WS2- x ), accurately modulating interaction with lithium and sulfur sites in polysulfide species for relatively higher interaction with short-chain polysulfides. The modified interaction trend is experimentally confirmed by distinguishing the kinetics of each electrochemical reaction step, indicating the effectiveness of the designed strategy. An Ah-level pouch cell with B-WS2- x delivers a gravimetric energy density of up to 417.6 Wh kg-1 with a low electrolyte/sulfur ratio of 3.6 µL mg-1 and negative/positive ratio of 1.2. This work presents a dual-coordination strategy for advancing evolutionarily catalytic activity, offering a rational strategy to develop effective catalysts for practical Li-S batteries.

Collaborative and privacy-preserving retired battery sorting for profitable direct recycling via federated machine learning.

Unsorted retired batteries with varied cathode materials hinder the adoption of direct recycling due to their cathode-specific nature. The surge in retired batteries necessitates precise sorting for effective direct recycling, but challenges arise from varying operational histories, diverse manufacturers, and data privacy concerns of recycling collaborators (data owners). Here we show, from a unique dataset of 130 lithium-ion batteries spanning 5 cathode materials and 7 manufacturers, a federated machine learning approach can classify these retired batteries without relying on past operational data, safeguarding the data privacy of recycling collaborators. By utilizing the features extracted from the end-of-life charge-discharge cycle, our model exhibits 1% and 3% cathode sorting errors under homogeneous and heterogeneous battery recycling settings respectively, attributed to our innovative Wasserstein-distance voting strategy. Economically, the proposed method underscores the value of precise battery sorting for a prosperous and sustainable recycling industry. This study heralds a new paradigm of using privacy-sensitive data from diverse sources, facilitating collaborative and privacy-respecting decision-making for distributed systems.

Regulating the Spin State Configuration in Bimetallic Phosphorus Trisulfides for Promoting Sulfur Redox Kinetics.

Lithium-sulfur (Li-S) batteries suffer from sluggish kinetics due to the poor conductivity of sulfur cathodes and polysulfide shutting. Current studies on sulfur redox catalysis mainly focus on the adsorption and catalytic conversion of lithium polysulfides but ignore the modulation of the electronic structure of the catalysts which involves spin-related charge transfer and orbital interactions. In this work, bimetallic phosphorus trisulfides embedded in Prussian blue analogue-derived nitrogen-doped hollow carbon nanocubes (FeCoPS3/NCs) were elaborately synthesized as a host to reveal the relationship between the catalytic activity and the spin state configuration for Li-S batteries. Orbital spin splitting in FeCoPS3 drives the electronic structure transition from low-spin to high-spin states, generating more unpaired electrons on the 3d orbit. Specifically, the nondegenerate orbitals involved in the high-spin configuration of FeCoPS3 result in the upshift of energy levels, generating more active electronic states. Such tailored electronic structure increases the charge transfer, influences the d-band center, and further modifies the adsorption energy with lithium polysulfides and the potential reaction pathways. Consequently, the cell with FeCoPS3/NC host exhibits an ultralow capacity decay of 0.037% per cycle over 1000 cycles. This study proposed a general strategy for sculpting geometric configurations to enable spin and orbital topology regulation in Li-S battery catalysts.

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Lithium metal batteries (LMBs) coupled with a high-voltage Ni-rich cathode are promising for meeting the increasing demand for high energy density. However, aggressive electrode chemistry imposes ultimate requirements on the electrolytes used. Among the various optimized electrolytes investigated, localized high-concentration electrolytes (LHCEs) have excellent reversibility against a lithium metal anode. However, because they consist of thermally and electrochemically unstable solvents, they have inferior stability at elevated temperatures and high cutoff voltages. Here we report a semisolvated sole-solvent electrolyte to construct a typical LHCE solvation structure but with significantly improved stability using one bifunctional solvent. The designed electrolyte exhibits exceptional stability against both electrodes with suppressed lithium dendrite growth, phase transition, microcracking, and transition metal dissolution. A Li||Ni0.8Co0.1Mn0.1O2 cell with this electrolyte operates stably over a wide temperature range from -20 to 60 °C and has a high capacity retention of 95.6% after the 100th cycle at 4.7 V, and ∼80% of the initial capacity is retained even after 180 cycles. This new electrolyte indicates a new path toward future electrolyte engineering and safe high-voltage LMBs.

Uncoordinated chemistry enables highly conductive and stable electrolyte/filler interfaces for solid-state lithium-sulfur batteries.

Composite-polymer-electrolytes (CPEs) embedded with advanced filler materials offer great promise for fast and preferential Li+ conduction. The filler surface chemistry determines the interaction with electrolyte molecules and thus critically regulates the Li+ behaviors at the interfaces. Herein, we probe into the role of electrolyte/filler interfaces (EFI) in CPEs and promote Li+ conduction by introducing an unsaturated coordination Prussian blue analog (UCPBA) filler. Combining scanning transmission X-ray microscope stack imaging studies and first-principle calculations, fast Li+ conduction is revealed only achievable at a chemically stable EFI, which can be established by the unsaturated Co-O coordination in UCPBA to circumvent the side reactions. Moreover, the as-exposed Lewis-acid metal centers in UCPBA efficiently attract the Lewis-base anions of Li salts, which facilitates the Li+ disassociation and enhances its transference number (tLi+). Attributed to these superiorities, the obtained CPEs realize high room-temperature ionic conductivity up to 0.36 mS cm-1 and tLi+ of 0.6, enabling an excellent cyclability of lithium metal electrodes over 4,000 h as well as remarkable capacity retention of 97.6% over 180 cycles at 0.5 C for solid-state lithium-sulfur batteries. This work highlights the crucial role of EFI chemistry in developing highly conductive CPEs and high-performance solid-state batteries.

Ultrahigh-Voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification.

Lithium cobalt oxide (LCO) is widely used in Li-ion batteries due to its high volumetric energy density, which is generally charged to 4.3 V. Lifting the cut-off voltage of LCO from 4.3 V to 4.7 V will increase the specific capacity from 150 to 230 mAh g-1 with a significant improvement of 53%. However, LCO suffers serious problems of H1-3/O1 phase transformation, unstable interface between cathode and electrolyte, and irreversible oxygen redox reaction at 4.7 V. Herein, interface stabilization and band structure modification are proposed to strengthen the crystal structure of LCO for stable cycling of LCO at an ultrahigh voltage of 4.7 V. Gradient distribution of magnesium and uniform doping of nickel in Li layers inhibit the harmful phase transitions of LCO, while uniform LiMgx Ni1- x PO4 coating stabilizes the LCO-electrolyte interface during cycles. Moreover, the modified band structure improves the oxygen redox reaction reversibility and electrochemical performance of the modified LCO. As a result, the modified LCO has a high capacity retention of 78% after 200 cycles at 4.7 V in the half cell and 63% after 500 cycles at 4.6 V in the full cell. This work makes the capacity of LCO one step closer to its theoretical specific capacity.

Stable Operation of Lithium Metal Batteries with Aggressive Cathode Chemistries at 4.9†V.

High-voltage lithium metal batteries (LMBs) pose severe challenges for the matching of electrolytes with aggressive electrodes, especially at low temperatures. Here, we report a rational modification of the Li+ solvation structure to extend the voltage and temperature operating ranges of conventional electrolytes. Ion-ion and ion-dipole interactions as well as the electrochemical window of solvents were tailored to improve oxidation stability and de-solvation kinetics of the electrolyte. Meanwhile, robust and elastic B and F-rich interphases are formed on both electrodes. Such optimization enables Li||LiNi0.5 Mn1.5 O4 cells (90.2 % retention after 400 cycles) and Li||LiNi0.6 Co0.2 Mn0.2 O2 (NCM622) cells (74.0 % retention after 200 cycles) to cycle stably at an ultra-high voltage of 4.9 V. Moreover, NCM622 cells deliver a considerable capacity of 143.5 mAh g-1 at -20 °C, showing great potential for practical uses. The proposed strategy sheds light on further optimization for high-voltage LMBs.

Engineering the interfacial orientation of MoS2/Co9S8 bidirectional catalysts with highly exposed active sites for reversible Li-CO2 batteries.

Sluggish CO2 reduction reaction (CO2RR) and evolution reaction (CO2ER) kinetics at cathodes seriously hamper the applications of Li-CO2 batteries, which have attracted vast attention as one kind of promising carbon-neutral technology. Two-dimensional transition metal dichalcogenides (TMDs) have shown great potential as the bidirectional catalysts for CO2 redox, but how to achieve a high exposure of dual active sites of TMDs with CO2RR/CO2ER activities remains a challenge. Herein, a bidirectional catalyst that vertically growing MoS2 on Co9S8 supported by carbon paper (V-MoS2/Co9S8@CP) has been designed with abundant edge as active sites for both CO2RR and CO2ER, improves the interfacial conductivity, and modulates the electron transportation pathway along the basal planes. As evidenced by the outstanding energy efficiency of 81.2% and ultra-small voltage gap of 0.68 V at 20 µA cm-2, Li-CO2 batteries with V-MoS2/Co9S8@CP show superior performance compared with horizontally growing MoS2 on Co9S8 (H-MoS2/Co9S8@CP), MoS2@CP, and Co9S8@CP. Density functional theory calculations help reveal the relationship between performance and structure and demonstrate the synergistic effect between MoS2 edge sites and Co9S8. This work provides an avenue to understand and realize rationally designed electronic contact of TMDs with specified crystal facets, but more importantly, provides a feasible guide for the design of high-performance cathodic catalyst materials in Li-CO2 batteries.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices.

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

A 3D Framework with Li3 N-Li2 S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium-Metal Anode.

The Li-metal anode has been recognized as the most promising anode for its high theoretical capacity and low reduction potential. However, the major drawbacks of Li metal, such as high reactivity and large volume expansion, can lead to dendrite growth and solid electrolyte interface (SEI) fracture. An in situ artificial inorganic SEI layer, consisting of lithium nitride and lithium sulfide, is herein reported to address the dendrite growth issues. Porous graphene oxide films are doped with sulfur and nitrogen (denoted as SNGO) to work as an effective lithium host. The SNGO film enables the in situ formation of an inorganic-rich SEI layer, which facilitates the transport of Li-ions, improves SEI mechanical strength, and avoids SEI fracture. In addition, COMSOL simulation results reveal that the microchannels fabricated by the 3D printing technique further shorten the Li-ion transfer pathways and homogenize heat and stress distribution in the batteries. As a result, the assembled anode shows low capacity fading of 0.1% per cycle at 2 C rate with the sulfur cathode. In addition, the high lithium utilization of the SNGO host enables the anode to provide a stable capacity at low negative/positive electrode ratios under 3 in LiS batteries.

Long-Life Regenerated LiFePO4 from Spent Cathode by Elevating the d-Band Center of Fe.

A large amount of spent LiFePO4 (LFP) has been produced in recent years because it is one of the most widely used cathode materials for electric vehicles. The traditional hydrometallurgical and pyrometallurgical recycling methods are doubted because of the economic and environmental benefits; the direct regeneration method is considered a promising way to recycle spent LFP. However, the performance of regenerated LFP by direct recycling is not ideal due to the migration of Fe ions during cycling and irreversible phase transition caused by sluggish Li+ diffusion. The key to addressing the challenge is to immobilize Fe atoms in the lattice and improve the Li+ migration capability during cycling. In this work, spent LFP is regenerated by using environmentally friendly ethanol, and its cycling stability is promoted by elevating the d-band center of Fe atoms via construction of a heterogeneous interface between LFP and nitrogen-doped carbon. The FeO bonding is strengthened and the migration of Fe ions during cycling is suppressed due to the elevated d-band center. The Li+ diffusion kinetics in the regenerated LFP are improved, leading to an excellent reversibility of the phase transition. Therefore,  the regenerated LFP exhibits an ultrastable cycling performance at a high rate of 10 C with ≈80% capacity retention after 1000 cycles.

A Review on Regulating Li+ Solvation Structures in Carbonate Electrolytes for Lithium Metal Batteries.

Lithium metal batteries (LMBs) are considered promising candidates for next-generation battery systems due to their high energy density. However, commercialized carbonate electrolytes cannot be used in LMBs due to their poor compatibility with lithium metal anodes. While increasing cut-off voltage is an effective way to boost the energy density of LMBs, conventional ethylene carbonate-based electrolytes undergo a number of side reactions at high voltages. It is therefore critical to upgrade conventional carbonate electrolytes, the performance of which is highly influenced by the solvation structure of lithium ions (Li+ ). This review provides a comprehensive overview of the strategies to regulate the solvation structure of Li+ in carbonate electrolytes for LMBs by better understanding the science behind the Li+ solvation structure and Li+ behavior. Different strategies are systematically compared to help select better electrolytes for specific applications. The remaining scientific and technical problems are pointed out, and directions for future research on carbonate electrolytes for LMBs are proposed.

TinO2n-1/MXene Hierarchical Bifunctional Catalyst Anchored on Graphene Aerogel toward Flexible and High-Energy Li-S Batteries.

The development of lithium-sulfur (Li-S) batteries with high-energy density, flexibility, and safety is very appealing for emerging implantable devices, biomonitoring, and roll-up displays. Nevertheless, the poor cycling stability and flexibility of the existing sulfur cathodes, flammable liquid electrolytes, and extremely reactive lithium anodes raise serious battery performance degradation and safety issues. Herein, a metallic 1T MoS2 and rich oxygen vacancies TinO2n-1/MXene hierarchical bifunctional catalyst (Mo-Ti/Mx) anchored on a reduced graphene oxide-cellulose nanofiber (GN) host (Mo-Ti/Mx-GN) was proposed to address the above challenges. By applying a directional freezing process, the hierarchical architecture of a flexible GN scaffold composed of waved multiarch morphology with long-range alignment is achieved. The synergetic effects of 1T MoS2 and TinO2n-1/MXene are beneficial to suppress the shuttling behavior of lithium polysulfides (LiPSs), expedite the redox kinetics of sulfur species, and promote the electrocatalytic reduction of LiPSs to Li2S. The electrode demonstrates improved electrochemical properties with high sulfur-mass loading (8.4 mgs cm-2) and lean electrolyte (7.6 µL mgs-1) operation. We also explored the feasibility of producing pouch cells with such flexible electrodes, gel polymer electrolytes, and a robust lithium anode, which exhibited reversible energy storage and output, wide temperature adaptability, and good safety against rigorous strikes, implying the potential for practical applications.

Suppressed Lattice Oxygen Release via Ni/Mn Doping from Spent LiNi0.5Mn0.3Co0.2O2 toward High-Energy Layered-Oxide Cathodes.

LiCoO2 has suffered from poor stability under high voltage as a result of insufficient Co-O bonding that causes lattice oxygen release and lattice distortions. Herein, we fabricated a high-voltage LiCoO2 at 4.6 V by doping with Ni/Mn atoms, which are obtained from spent LiNi0.5Mn0.3Co0.2O2 cathode materials. The as-prepared high-voltage LiCoO2 with Ni/Mn substitutional dopants in the Co layer enhances Co-O bonding that suppresses oxygen release and harmful phase transformation during delithiation, thus stabilizing the layered structure and leading to a superior electrochemical performance at 4.6 V. The pouch cell of modified LiCoO2 exhibits a capacity retention of 85.1% over 100 cycles at 4.5 V (vs graphite). We found that our strategy is applicable for degraded LiCoO2, and the regenerated LiCoO2 using this strategy exhibits excellent capacity retention (84.1%, 100 cycles) at 4.6 V. Our strategy paves the way for the direct conversion of spent batteries into high-energy-density batteries.