Photocatalytic degradation of air pollutant by modified nano titanium oxide (TiO2)in a fluidized bed photoreactor: Optimizing and kinetic modeling.

Volatile organic compound (VOC) removal by photocatalytic oxidation (PCO) is the practical and economical process to reduce air pollutants. Many conditions, such as temperature, initial concentration of VOC, relative humidity, gas flow rate, and light intensity, affected this process. Therefore, finding the optimal operating conditions for the PCO process can increase the efficiency of the process and also operate the process more economically. Also, it is possible to scale up the process with more confidence by the kinetics modeling of the process and finding the rate constants. In this study, the effect of gas flow rate, light intensity, and VOC inlet concentration were investigated. The results show that the flow rate of 15 lit/min is more efficient, and the effect of the pollutant input concentration and light intensity directly affects the conversion percentage. The kinetic study of acetaldehyde removal was investigated in the fluidized bed reactor, and the best kinetic model was proposed based on reactor model regression on the outlet concentration data. The best model describes a langmuir-hynshelwood type model with adsorbed acetaldehyde's inhibition effect on the catalyst's surface. The R2 coefficient for the best kinetic type is 0.98.

Two-Dimensional Material-Based Electrochemical Sensors/Biosensors for Food Safety and Biomolecular Detection.

Two-dimensional materials (2DMs) exhibited great potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and others due to their unique physical, chemical, and biological properties. In this review, we present recent advances in the fabrication of 2DM-based electrochemical sensors and biosensors for applications in food safety and biomolecular detection that are related to human health. For this aim, firstly, we introduced the bottom-up and top-down synthesis methods of various 2DMs, such as graphene, transition metal oxides, transition metal dichalcogenides, MXenes, and several other graphene-like materials, and then we demonstrated the structure and surface chemistry of these 2DMs, which play a crucial role in the functionalization of 2DMs and subsequent composition with other nanoscale building blocks such as nanoparticles, biomolecules, and polymers. Then, the 2DM-based electrochemical sensors/biosensors for the detection of nitrite, heavy metal ions, antibiotics, and pesticides in foods and drinks are introduced. Meanwhile, the 2DM-based sensors for the determination and monitoring of key small molecules that are related to diseases and human health are presented and commented on. We believe that this review will be helpful for promoting 2DMs to construct novel electronic sensors and nanodevices for food safety and health monitoring.

The Combination of Two-Dimensional Nanomaterials with Metal Oxide Nanoparticles for Gas Sensors: A Review.

Metal oxide nanoparticles have been widely utilized for the fabrication of functional gas sensors to determine various flammable, explosive, toxic, and harmful gases due to their advantages of low cost, fast response, and high sensitivity. However, metal oxide-based gas sensors reveal the shortcomings of high operating temperature, high power requirement, and low selectivity, which limited their rapid development in the fabrication of high-performance gas sensors. The combination of metal oxides with two-dimensional (2D) nanomaterials to construct a heterostructure can hybridize the advantages of each other and overcome their respective shortcomings, thereby improving the sensing performance of the fabricated gas sensors. In this review, we present recent advances in the fabrication of metal oxide-, 2D nanomaterials-, as well as 2D material/metal oxide composite-based gas sensors with highly sensitive and selective functions. To achieve this aim, we firstly introduce the working principles of various gas sensors, and then discuss the factors that could affect the sensitivity of gas sensors. After that, a lot of cases on the fabrication of gas sensors by using metal oxides, 2D materials, and 2D material/metal oxide composites are demonstrated. Finally, we summarize the current development and discuss potential research directions in this promising topic. We believe in this work is helpful for the readers in multidiscipline research fields like materials science, nanotechnology, chemical engineering, environmental science, and other related aspects.

[Degumming of kenaf fibers by combining steam explosion with ultrasonic treatment].

Kenaf has a high content of gum that is difficult to remove. Traditional chemical degumming process causes serious environmental pollution. To solve the problem, we developed a new method to degum kenaf. We pretreated the kenaf with steam explosion followed by ultrasonic treatment. We chose the single factor tests to select the ultrasonic frequency, sodium hydroxide concentration and processing time. Combined with orthogonal tests, we found that the optimum conditions were as follows: ultrasonic frequency was 28 kHz, sodium hydroxide concentration was 2%, and processing time was 60 min. Under these conditions, the residual gum of kenaf fiber was 9.72% and the fineness was 139.45 N(m). Steam explosion combined with ultrasonic method is effective in degumming of kenaf.