Anomalous High-Temperature Magnetoresistance in a Dilute 2D Hole System.

We report an unusual magnetoresistance that strengthens with the temperature in a dilute two-dimensional (2D) hole system in GaAs/AlGaAs quantum wells with densities p=1.98-0.99×10^{10}/cm^{2} where r_{s}, the ratio between Coulomb energy and Fermi energy, is as large as 20-30. We show that, while the system exhibits a negative parabolic magnetoresistance at low temperatures (≲0.4 K) characteristic of an interacting Fermi liquid, a positive magnetoresistance emerges unexpectedly at higher temperatures, and grows with increasing temperature even in the regime T∼E_{F}, close to the Fermi energy. This unusual positive magnetoresistance at high temperatures can be attributed to the viscous transport of 2D hole fluid in the hydrodynamic regime where holes scatter frequently with each other. These findings give insight into the collective transport of strongly interacting carriers in the r_{s}≫1 regime and new routes toward magnetoresistance at high temperatures.

Interfacial Charge Transfer and Gate-Induced Hysteresis in Monochalcogenide InSe/GaSe Heterostructures.

Heterostructures of two-dimensional (2D) van der Waals semiconductor materials offer a diverse playground for exploring fundamental physics and potential device applications. In InSe/GaSe heterostructures formed by sequential mechanical exfoliation and stacking of 2D monochalcogenides InSe and GaSe, we observe charge transfer between InSe and GaSe because of the 2D van der Waals interface formation and a strong hysteresis effect in the electron transport through the InSe layer when a gate voltage is applied through the GaSe layer. A gate voltage-dependent conductance decay rate is also observed. We relate these observations to the gate voltage-dependent dynamical charge transfer between InSe and GaSe layers.

Broad spectral tuning of ultra-low-loss polaritons in a van der Waals crystal by intercalation.

Phonon polaritons-light coupled to lattice vibrations-in polar van der Waals crystals are promising candidates for controlling the flow of energy on the nanoscale due to their strong field confinement, anisotropic propagation and ultra-long lifetime in the picosecond range1-5. However, the lack of tunability of their narrow and material-specific spectral range-the Reststrahlen band-severely limits their technological implementation. Here, we demonstrate that intercalation of Na atoms in the van der Waals semiconductor α-V2O5 enables a broad spectral shift of Reststrahlen bands, and that the phonon polaritons excited show ultra-low losses (lifetime of 4 ± 1 ps), similar to phonon polaritons in a non-intercalated crystal (lifetime of 6 ± 1 ps). We expect our intercalation method to be applicable to other van der Waals crystals, opening the door for the use of phonon polaritons in broad spectral bands in the mid-infrared domain.

Development of topological insulator and topological crystalline insulator nanostructures.

Topological insulators (TIs), a class of quantum materials with time reversal symmetry protected gapless Dirac-surface states, have attracted intensive research interests due to their exotic electronic properties. Topological crystalline insulators (TCIs), whose gapless surface states are protected by the crystal symmetry, have recently been proposed and experimentally verified as a new class of TIs. With high surface-to-volume ratio, nanoscale TI and TCI materials such as nanowires and nanoribbons can have significantly enhanced contribution from surface states in carrier transport and are thus ideally suited for the fundamental studies of topologically protected surface state transport and nanodevice fabrication. This article will review the synthesis and transport device measurements of TIs and TCIs nanostructures.

An electrically driven structural phase transition in single Ag2Te nanowire devices.

Exploring new phase-change materials is instrumental in the progression of electronic memory devices. Ag2Te with its reversible structural phase transition, and in the form of nanowires, has become an apt candidate for potential use in nanoscale memory devices. Here, we report a study on the temperature- or electrically-driven phase change properties of crystalline Ag2Te nanowires. We first demonstrate that this structural phase change can be achieved via heating up the nanowires, which results in a sharp drop in conductance. Then we show that a DC voltage (<1 V) induced Joule heating can be used to reach the phase transition, even without any external heating. This work shows the potential of using Ag2Te nanowires as a phase-change material in low voltage and low power nanoscale devices.

Tuning spin-orbit coupling in 2D materials for spintronics: a topical review.

Atomically-thin 2D materials have opened up new opportunities in the past decade in realizing novel electronic device concepts, owing to their unusual electronic properties. The recent progress made in the aspect of utilizing additional degrees of freedom of the electrons such as spin and valley suggests that 2D materials have a significant potential in replacing current electronic-charge-based semiconductor technology with spintronics and valleytronics. For spintronics, spin-orbit coupling plays a key role in manipulating the electrons' spin degree of freedom to encode and process information, and there are a host of recent studies exploring this facet of 2D materials. We review the recent advances in tuning spin-orbit coupling of 2D materials which are of notable importance to the progression of spintronics.

The dimensional crossover of quantum transport properties in few-layered Bi2Se3 thin films.

Topological insulator bismuth selenide (Bi2Se3) thin films with a thickness of 6.0 quintuple layers (QL) to 23 QL are deposited using pulsed laser deposition (PLD). The arithmetical mean deviation of the roughness (R a) of these films is less than 0.5 nm, and the root square mean deviation of the roughness (R q) of these films is less than 0.6 nm. Two-dimensional localization and weak antilocalization are observed in the Bi2Se3 thin films approaching 6.0 nm, and the origin of weak localization should be a 2D electron gas resulting from the split bulk state. Localization introduced by electron-electron interaction (EEI) is revealed by the temperature dependence of the conductivity. The enhanced contribution of three-dimensional EEI and electron-phonon interaction in the electron dephasing process is found by increasing the thickness. Considering the advantage of stoichiometric transfer in PLD, it is believed that the high quality Bi2Se3 thin films might provide more paths for doping and multilayered devices.

Direct, Transfer-Free Growth of Large-Area Hexagonal Boron Nitride Films by Plasma-Enhanced Chemical Film Conversion (PECFC) of Printable, Solution-Processed Ammonia Borane.

Synthesis of large-area hexagonal boron nitride (h-BN) films for two-dimensional (2D) electronic applications typically requires high temperatures (∼1000 °C) and catalytic metal substrates which necessitate transfer. Here, analogous to plasma-enhanced chemical vapor deposition, a nonthermal plasma is employed to create energetic and chemically reactive states such as atomic hydrogen and convert a molecular precursor film to h-BN at temperatures as low as 500 °C directly on metal-free substrates-a process we term plasma-enhanced chemical film conversion (PECFC). Films containing ammonia borane as a precursor are prepared by a variety of solution processing methods including spray deposition, spin coating, and inkjet printing and reacted in a cold-wall reactor with a planar dielectric barrier discharge operated at atmospheric pressure in a background of argon or a mixture of argon and hydrogen. Systematic characterization of the converted h-BN films by micro-Raman spectroscopy shows that the minimum temperature for nucleation on silicon-based substrates can be decreased from 800 to 500 °C by the addition of a plasma. Furthermore, the crystalline domain size, as reflected by the full width at half-maximum, increased by more than 3 times. To demonstrate the potential of the h-BN films as a gate dielectric in 2D electronic devices, molybdenum disulfide field effect transistors were fabricated, and the field effect mobility was found to be improved by up to 4 times over silicon dioxide. Overall, PECFC allows h-BN films to be grown at lower temperatures and with improved crystallinity than CVD, directly on substrates suitable for electronic device fabrication.

Non-Drude Magneto-Transport Behavior in a Topological Crystalline Insulator/Band Insulator Heterostructure.

The Drude model is one of the most fundamental models used to understand the electronic carrier transport in materials, including recently discovered topological materials. Here, we present a magneto-transport study revealing the non-Drude transport behavior in a heterostructure of topological crystalline insulator (TCI) SnTe and band insulator PbTe which exhibits a nonsaturating linear magneto-resistance (MR) effect, a novel phenomenon widely observed in topological materials with gapless dispersion. It is shown that in the van der Pauw geometry in which the longitudinal and transverse magneto-resistances are measured to extract the magneto-conductivity, the two-band Drude model is not sufficient to self-consistently describe both the longitudinal and transverse magneto-conductivities. Furthermore, in the Corbino geometry, which directly measures the longitudinal magneto-conductivity σ xx( B) for a straightforward comparison with the Drude model, the MR, 1/σ xx( B), still reveals a large linear MR effect, in direct discrepancy with the Drude model. While shining further light on the multiple-carrier transport in TCI, this study highlights an unusual magneto-transport character of topological materials that challenges the standard Drude picture of electron transport.

Tuning Rashba Spin-Orbit Coupling in Gated Multilayer InSe.

Manipulating the electron spin with the aid of spin-orbit coupling (SOC) is an indispensable element of spintronics. Electrostatically gating a material with strong SOC results in an effective magnetic field which can in turn be used to govern the electron spin. In this work, we report the existence and electrostatic tunability of Rashba SOC in multilayer InSe. We observed a gate-voltage-tuned crossover from weak localization (WL) to weak antilocalization (WAL) effect in quantum transport studies of InSe, which suggests an increasing SOC strength. Quantitative analyses of magneto-transport studies and energy band diagram calculations provide strong evidence for the predominance of Rashba SOC in electrostatically gated InSe. Furthermore, we attribute the tendency of the SOC strength to saturate at high gate voltages to the increased electronic density of states-induced saturation of the electric field experienced by the electrons in the InSe layer. This explanation of nonlinear gate voltage control of Rashba SOC can be generalized to other electrostatically gated semiconductor nanomaterials in which a similar tendency of spin-orbit length saturation was observed (e.g., nanowire field effect transistors), and is thus of broad implications in spintronics. Identifying and controlling the Rashba SOC in InSe may serve pivotally in devising III-VI semiconductor-based spintronic devices in the future.

Growth and quantum transport properties of vertical Bi2Se3 nanoplate films on Si substrates.

Controlling the growth direction (planar versus vertical) and surface-to-bulk ratio can lead to lots of unique properties for two-dimensional layered materials. We report a simple method to fabricate continuous films of vertical Bi2Se3 nanoplates on Si substrate and investigate the quantum transport properties of such films. In contrast to (001) oriented planar Bi2Se3 nanoplate film, vertical Bi2Se3 nanoplate films are enclosed by (015) facets, which possess high surface-to-bulk ratio that can enhance the quantum transport property of topological surface states. And by controlling the compactness of vertical Bi2Se3 nanoplates, we realized an effective tuning of the weak antilocalization effect from topological surface states in Bi2Se3 films. Our work paves a way for exploring the unique transport properties of this unconventional structure topological insulator film.

V2O5: A 2D van der Waals Oxide with Strong In-Plane Electrical and Optical Anisotropy.

V2O5 with a layered van der Waals (vdW) structure has been widely studied because of the material's potential in applications such as battery electrodes. In this work, microelectronic devices were fabricated to study the electrical and optical properties of mechanically exfoliated multilayered V2O5 flakes. Raman spectroscopy was used to determine the crystal structure axes of the nanoflakes and revealed that the intensities of the Raman modes depend strongly on the relative orientation between the crystal axes and the polarization directions of incident/scattered light. Angular dependence of four-probe resistance measured in the van der Pauw (vdP) configuration revealed an in-plane anisotropic resistance ratio of ∼100 between the a and b crystal axes, the largest in-plane transport anisotropy effect experimentally reported for two-dimensional (2D) materials to date. This very large resistance anisotropic ratio is explained by the nonuniform current flow in the vdP measurement and an intrinsic mobility anisotropy ratio of 10 between the a and b crystal axes. Room-temperature electron Hall mobility up to 7 cm2/(V s) along the high-mobility direction was obtained. This work demonstrates V2O5 as a layered 2D vdW oxide material with strongly anisotropic optical and electronic properties for novel applications.

Anisotropic electrical resistance in mesoscopic LaAlO3/SrTiO3 devices with individual domain walls.

The crystal structure of bulk SrTiO3(STO) transitions from cubic to tetragonal at around 105 K. Recent local scanning probe measurements of LaAlO3/SrTiO3 (LAO/STO) interfaces indicated the existence of spatially inhomogeneous electrical current paths and electrostatic potential associated with the structural domain formation in the tetragonal phase of STO. Here we report a study of temperature dependent electronic transport in combination with the polarized light microscopy of structural domains in mesoscopic LAO/STO devices. By reducing the size of the conductive interface to be comparable to that of a single tetragonal domain of STO, the anisotropy of interfacial electron conduction in relationship to the domain wall and its direction was characterized between T = 10-300 K. It was found that the four-point resistance measured with current parallel to the domain wall is larger than the resistance measured perpendicular to the domain wall. This observation is qualitatively consistent with the current diverting effect from a more conductive domain wall within the sample. Among all the samples studied, the maximum resistance ratio found is at least 10 and could be as large as 105 at T = 10 K. This electronic anisotropy may have implications on other oxide hetero-interfaces and the further understanding of electronic/magnetic phenomena found in LAO/STO.

Imaging the Long Transport Lengths of Photo-generated Carriers in Oriented Perovskite Films.

Organometal halide perovskite has emerged as a promising material for solar cells and optoelectronics. Although the long diffusion length of photogenerated carriers is believed to be a critical factor responsible for the material's high efficiency in solar cells, a direct study of carrier transport over long distances in organometal halide perovskites is still lacking. We fabricated highly oriented crystalline CH3NH3PbI3 (MAPbI3) thin-film lateral transport devices with long channel length (∼120 µm). By performing spatially scanned photocurrent imaging measurements with local illumination, we directly show that the perovskite films prepared here have very long transport lengths for photogenerated carriers, with a minority carrier (electron) diffusion length on the order of 10 µm. Our approach of applying scanning photocurrent microscopy to organometal halide perovskites may be further used to elucidate the carrier transport processes and the vastly different carrier diffusion lengths (∼100 nm to 100 µm) in different types of organometal halide perovskites.

Screening limited switching performance of multilayer 2D semiconductor FETs: the case for SnS.

Gate tunable p-type multilayer tin mono-sulfide (SnS) field-effect transistor (FET) devices with SnS thickness between 50 and 100 nm were fabricated and studied to understand their performance. The devices showed anisotropic inplane conductance and room temperature field effect mobilities ∼5-10 cm2 V-1 s-1. However, the devices showed an ON-OFF ratio ∼10 at room temperature due to appreciable OFF state conductance. The weak gate tuning behavior and finite OFF state conductance in the depletion regime of SnS devices are explained by the finite carrier screening length effect which causes the existence of a conductive surface layer from defect induced holes in SnS. Through etching and n-type surface doping by Cs2CO3 to reduce/compensate the not-gatable holes near the SnS flake's top surface, the devices exhibited an order of magnitude improvement in the ON-OFF ratio, and a hole Hall mobility of ∼100 cm2 V-1 s-1 at room temperature is observed. This work suggests that in order to obtain effective switching and low OFF state power consumption, two-dimensional (2D) semiconductor based depletion mode FETs should limit their thickness to within the Debye screening length of the carriers in the semiconductor.

Intrinsic Electron Mobility Exceeding 10³ cm²/(V s) in Multilayer InSe FETs.

Graphene-like two-dimensional (2D) materials not only are interesting for their exotic electronic structure and fundamental electronic transport or optical properties but also hold promises for device miniaturization down to atomic thickness. As one material belonging to this category, InSe, a III-VI semiconductor, not only is a promising candidate for optoelectronic devices but also has potential for ultrathin field effect transistor (FET) with high mobility transport. In this work, various substrates such as PMMA, bare silicon oxide, passivated silicon oxide, and silicon nitride were used to fabricate multilayer InSe FET devices. Through back gating and Hall measurement in four-probe configuration, the device's field effect mobility and intrinsic Hall mobility were extracted at various temperatures to study the material's intrinsic transport behavior and the effect of dielectric substrate. The sample's field effect and Hall mobilities over the range of 20-300 K fall in the range of 0.1-2.0 × 10(3) cm(2)/(V s), which are comparable or better than the state of the art FETs made of widely studied 2D transition metal dichalcogenides.

Granularity controlled nonsaturating linear magnetoresistance in topological insulator Bi2Te3 films.

We report on the magnetotransport properties of chemical vapor deposition grown films of interconnected Bi2Te3 nanoplates. Similar to many other topological insulator (TI) materials, these granular Bi2Te3 films exhibit a linear magnetoresistance (LMR) effect which has received much recent attention. Studying samples with different degree of granularity, we find a universal correlation between the magnitude of the LMR and the average mobility (⟨µ⟩) of the films over nearly 2 orders of magnitude change of ⟨µ⟩. The granularity controlled LMR effect here is attributed to the mobility fluctuation induced classical LMR according to the Parish-Littlewood theory. These findings have implications to both the fundamental understanding and magnetoresistive device applications of TI and small bandgap semiconductor materials.

Sensing and energy harvesting of fluidic flow by InAs nanowires.

Indium arsenide (InAs) nanowire (NW) field effect transistors (FETs) were incorporated into a microfluidic channel to detect the flow rate change as well as to harvest fluid flow energy for electric power generation. Discrete changes in the electric current through InAs NW FETs were observed upon flow rate changes at steps of 1 mL/h (equivalent to ~3 mm/s change in average linear velocity). The current also showed a sign change upon reversing flow direction. By comparing the response of the device with and without a driving voltage between source-drain electrodes, we conclude that the dominant contribution in the response is the streaming potential tuned conductance of NW. In the absence of source-drain voltage, we further demonstrate that the ionic flow could enable generation of an ~mV electrical potential (or ~nA electrical current) inside the InAs NW per mL/h increase of flow rate, most likely due to the charge dragging effect.

Metal-insulator transition in variably doped (Bi(1-x)Sb(x))2Se3 nanosheets.

Topological insulators are novel quantum materials with metallic surface transport but insulating bulk behavior. Often, topological insulators are dominated by bulk contributions due to defect induced bulk carriers, making it difficult to isolate the more interesting surface transport characteristics. Here, we report the synthesis and characterization of nanosheets of a topological insulator Bi2Se3 with variable Sb-doping levels to control the electron carrier density and surface transport behavior. (Bi(1-x)Sb(x))2Se3 thin films of thickness less than 10 nm are prepared by epitaxial growth on mica substrates in a vapor transport setup. The introduction of Sb in Bi2Se3 effectively suppresses the room temperature electron density from ∼4 × 10(13) cm(-2) in pure Bi2Se3 (x = 0) to ∼2 × 10(12) cm(-2) in (Bi(1-x)Sb(x))2Se3 at x ∼ 0.15, while maintaining the metallic transport behavior. At x ≳ ∼0.20, a metal-insulator transition (MIT) is observed, indicating that the system has transformed into an insulator in which the metallic surface conduction is blocked. In agreement with the observed MIT, Raman spectroscopy reveals the emergence of vibrational modes arising from Sb-Sb and Sb-Se bonds at high Sb concentrations, confirming the appearance of the Sb2Se3 crystal structure in the sample. These results suggest that nanostructured chalcogenide films with controlled doping can be a tunable platform for fundamental studies and electronic applications of topological insulator systems.