Indentation hardness: A simple test that correlates with the dissipated-energy predictor for fatigue-life in bovine pericardium membranes for bioprosthetic heart valves.

The aim of this study was to evaluate the variation of hardness with fatigue in calf pericardium, a biomaterial commonly used in bioprosthetic heart valves, and its relationship with the energy dissipated during the first fatigue cycle that has been shown to be a predictor of fatigue-life (García Páez et al., 2006, 2007; Rojo et al., 2010). Fatigue tests were performed in vitro on 24 pericardium specimens cut in a root-to-apex direction. The specimens were subjected to a maximum stress of 1MPa in blocks of 10, 25, 50, 100, 250, 500, 1000 and 1500 cycles. By means of a modified Shore A hardness test procedure, the hardness of the specimen was measured before and after fatigue tests. Results showed a significant correlation of such hardness with fatigue performance and with the energy dissipated in the first cycle of fatigue, a predictor of pericardium durability. The study showed indentation hardness as a simple and reliable indicator of mechanical performance, one which could be easily implemented in improving tissue selection.

Changes in the mechanical properties of chemically treated bovine pericardium after a short uniaxial cyclic test.

The mechanical behavior of calf pericardium, a biomaterial utilized in the manufacture of cardiac bioprostheses, in response to a short tensile cyclic test has been evaluated. The trial involved 120 samples cut longitudinally or transversely, subjected to 10 cycles until a stress of between 1 and 3 MPa was reached. Tests of hardness and tear propagation were performed, and the results were compared with a control series. The energy loss was also computed, and it was approximately 10-fold greater in the first cycle than the loss in the subsequent nine cycles. Despite this singularity, they correlated very precisely. The effect of the direction in which the tissue is cut on energy loss was not significant nor the difference between hardness prior to and after testing. The results of the tear propagation tests gave no statistical differences prior to and after testing. From the obtained results, it seems that the test carried out does not affect significantly the mechanical properties of calf pericardium.

Fatigue behaviour of young ostrich pericardium.

Young ostrich pericardia (biomaterial under study for manufacturing cardiac valve leaflets), has been subjected to biaxial tension fatigue until breakage. Supraphysiological values of pressure (1 to 6 atm) have been employed to accelerate damage and, therefore, to reduce testing time but at physiological frequency in order to avoid viscoelastic behaviour changes. The lifetime fatigue curves have been obtained and large scatter has been observed in the results but this can be strongly reduced with adequate material selection. The thickness-based selection of samples has proved to be ineffective both in reducing scatter or improving strength, but the energy-based selection aided with statistical decision techniques has been shown to be very successful. The energy loss (energy under the hysteresis loop of each load and unload cycle) appears to be a very accurate predictor of the expected fatigue lifetime of the tissue.

Determination of the force necessary for the propagation of tears in ostrich and calf pericardium.

The durability of prosthetic heart valve leaflets made of biological materials is limited. A tear in the biomaterial accelerates their early failure, but microtearing of the collagen fibers may be responsible for their medium-term failure. We studied the force necessary to propagate tearing in two biomaterials: ostrich and calf pericardium. One hundred twenty samples of each tissue were tested in an Elmendorf pendulum capable of measuring the force required to tear a tissue in which a predefined slit had been made. The forces required to produce tears, ranging between 2.5 and 0.25 cm in length, were determined. For ostrich pericardium, this force ranged between 67.67 and 4.80 newton, while that required to tear the same lengths of calf pericardium ranged between 70.67 and 4.70 newton. The function that relates the tearing force to the length of the tear was expressed as follows: y = 20.62x + 1.77x(2) (R(2) = 0.923) for ostrich pericardium and y = 45.57x - 7.21x(2) (R(2) = 0.936) for calf pericardium, where y is the force in newton and x is the length in centimeter. Calf pericardium was found to have a greater resistance to tearing. However, these results should be interpreted with caution owing to the fact that the thickness of the majority of the samples of ostrich pericardium was significantly less than that of calf pericardium. A more careful selection and utilization of adult ostrich pericardium would probably improve these results.