Correlation of H3K9ac and H4K12ac With Cell Proliferation Marker Ki-67 in Oral Leukoplakia: An Immunohistochemical Study.

This study aimed to analyze the immunohistochemical expression of H3K9ac and H4K12ac in oral leukoplakia (OL) and its association with cell proliferation marker Ki-67 and clinicopathologic data. Paraffin-embedded, formalin-fixed tissue samples from 50 OLs and 15 fragments of the normal oral mucosa (NOM) were submitted to immunohistochemical assay using the streptavidin-biotin-peroxidase method. Quantitative analysis of the antigen-antibody reaction was performed by obtaining integrated optical density (IOD) and the percentage of positive nuclei (PPN) with ImageJ software. OL samples presented higher PPN ( P =0.02) and lower IOD values ( P =0.007) for H4K12ac in comparison to NOM. The area under the receiver operating characteristic curve for PPN and IOD values of H4K12ac immunostaining were 0.70 ( P =0.02) and 0.73 ( P =0.007), respectively. No differences were found between OL and NOM for H3K9ac. Cell proliferation marker Ki-67 had a positive correlation with PPN ( P <0.0001) and IOD ( P =0.0007) for H3K9ac expression and with IOD values ( P =0.002) for H4K12ac expression. The present findings suggest that alterations in the acetylation pattern of H4K12 occur in the early stages of oral carcinogenesis and that both H3K9ac and H4K12ac might have a role in the regulation of epithelial cell proliferation of OL.

Structural resistance of orthodontic mini-screws inserted for extra-alveolar anchorage.

The risk of fracture or strain in mini-screws is higher if diameter, length, type of alloy or insertion angle is selected inappropriately. The aims of this study were to test the structural resistance of two types of orthodontic mini-screws -one made of stainless steel and another of titanium- from an international brand and to evaluate the efficacy of two other titanium miniscrews of Brazilian origin, during an extra-alveolar anchorage procedure. The mini-screws analyzed were: Bomei stainless steel and Bomei titanium / Taiwan, Morelli titanium and Neodent titanium/ Brazil. Experiments were conducted on pig mandibles to simulate the process of extra-alveolar anchorage. Two insertion processes were used: Direct at 30º, and Indirect, starting at 60º and ending at 30º with gradual continuous movement. Strain was evaluated using Optical and Scanning Electron Microscopy. Data were evaluated using Kruskal-Wallis non-parametric statistical analysis and post hoc Tamhane test. Significant statistical differences in strain were observed among the mini-screws used in the extra-alveolar insertions, both for the direct and indirect procedures. In the indirect insertion tests, both stainless steel and titanium mini-screws suffered deformation, showing that angling can be an important factor in mini-screw failure rates. The change in angle during the insertion movement increased deformation rates independently of alloy type, increasing the risk of failure. These results could help orthodontists in choosing mini-screws for extra-alveolar anchorage, which can be performed with direct or indirect insertion. In vivo studies should be conducted to confirm the findings of this study.

O risco de fratura ou tensão nos mini-parafusos é maior se o diâmetro, comprimento, tipo de liga ou ângulo de inserção for selecionado de forma inadequada. Os objetivos deste estudo foram testar a resistência estrutural de dois tipos de miniaparafusos ortodônticos ­um feito de aço inoxidável e outro de titânio­ de uma marca internacional e avaliar a eficácia de dois outros mini-parafusos de titânio de origem brasileira, durante um procedimento de ancoragem extra-alveolar. Os miniaparafusos analisados foram: Bomei aço inoxidável e Bomei titânio / Taiwan, Morelli titânio e Neodent titânio / Brasil. Foram realizadas experiências em mandíbulas de porcos para simular o processo de ancoragem extra-alveolar. Foram utilizados dois processos de inserção (Direta a 30º, e Indireta, começando a 60º e terminando a 30º com movimento gradual contínuo). A deformação foi avaliada utilizando Microscopia Óptica e Microscopia Eletrônica de Varredura. Os dados foram avaliados utilizando análise estatística não paramétrica Kruskal-Wallis e teste post-hoc Tamhane. Diferenças estatísticas significativas na deformação foram observadas entre os miniparafusos utilizados nas inserções extra-alveolares, tanto para os procedimentos diretos como indiretos. Nos testes de inserção indireta, tanto os mini-parafusos de aço inoxidável como os de titânio sofreram deformação, mostrando que a angulação pode ser um fator importante nas taxas de falha dos mini-parafusos. A mudança no ângulo durante o movimento de inserção aumentou as taxas de deformação independentemente do tipo de liga, aumentando o risco de falha. Estes resultados podem ajudar os ortodontistas na escolha de mini-parafusos para ancoragem extra-alveolar, que pode ser realizada com inserção direta ou indireta. Estudos in vivo devem ser conduzidos para confirmar os resultados deste estudo.

Structural resistance of orthodontic mini-screws inserted for extraalveolar anchorage / Resistência estrutural de mini-aparafusos ortodônticos inseridos para ancoragem extra-alveolar

ABSTRACT The risk of fracture or strain in mini-screws is higher if diameter, length, type of alloy or insertion angle is selected inappropriately. The aims of this study were to test the structural resistance of two types of orthodontic mini-screws -one made of stainless steel and another of titanium- from an international brand and to evaluate the efficacy of two other titanium miniscrews of Brazilian origin, during an extra-alveolar anchorage procedure. The mini-screws analyzed were: Bomei stainless steel and Bomei titanium/Taiwan, Morelli titanium and Neodent titanium/ Brazil. Experiments were conducted on pig mandibles to simulate the process of extra-alveolar anchorage. Two insertion processes were used: Direct at 30°, and Indirect, starting at 60° and ending at 30° with gradual continuous movement. Strain was evaluated using Optical and Scanning Electron Microscopy. Data were evaluated using Kruskal-Wallis non-parametric statistical analysis and post hoc Tamhane test. Significant statistical differences in strain were observed among the mini-screws used in the extra-alveolar insertions, both for the direct and indirect procedures. In the indirect insertion tests, both stainless steel and titanium mini-screws suffered deformation, showing that angling can be an important factor in mini-screw failure rates. The change in angle during the insertion movement increased deformation rates independently of alloy type, increasing the risk offailure. These results could help orthodontists in choosing mini-screws for extra-alveolar anchorage, which can be performed with direct or indirect insertion. In vivo studies should be conducted to confirm the findings of this study.

RESUMO O risco de fratura ou tensao nos mini-parafusos é maior se o diámetro, comprimento, tipo de liga ou ángulo de insergao for selecionado de forma inadequada. Os objetivos deste estudo foram testar a resistencia estrutural de dois tipos de mini-aparafusos ortodónticos -um feito de ago inoxidável e outro de titànio- de uma marca internacional e avaliar a eficácia de dois outros mini-parafusos de titànio de origem brasileira, durante um procedimento de ancoragem extra-alveolar. Os mini-aparafusos analisados foram: Bomei ago inoxidável e Bomei titànio / Taiwan, Morelli titànio e Neodent titànio / Brasil. Foram realizadas experiencias em mandíbulas de porcos para simular o processo de ancoragem extra-alveolar. Foram utilizados dois processos de insergao (Direta a 30°, e Indireta, comegando a 60° e terminando a 30° com movimento gradual continuo). A deformagao foi avaliada utilizando Microscopia Optica e Microscopia Eletrónica de Varredura. Os dados foram avaliados utilizando análise estatistica nao paramétrica Kruskal-Wallis e testepost-hoc Tamhane. Diferengas estatisticas significativas na deformagao foram observadas entre os mini-parafusos utilizados nas insergoes extra-alveolares, tanto para os procedimentos diretos como indiretos. Nos testes de insergao indireta, tanto os mini-parafusos de ago inoxidável como os de titánio sofreram deformagao, mostrando que a angulagao pode ser um fator importante nas taxas de falha dos mini-parafusos. A mudanga no ángulo durante o movimento de insergao aumentou as taxas de deformagao independentemente do tipo de liga, aumentando o risco de falha. Estes resultados podem ajudar os ortodontistas na escolha de mini-parafusos para ancoragem extra-alveolar, que pode ser realizada com insergao direta ou indireta. Estudos in vivo devem ser conduzidos para confirmar os resultados deste estudo.