Genetic Algorithm-Based Grouping Strategy for IEEE 802.11ah Networks.

The IEEE 802.11ah standard is intended to adapt the specifications of IEEE 802.11 to the Internet of Things (IoT) scenario. One of the main features of IEEE 802.11ah consists of the Restricted Access Window (RAW) mechanism, designed for scheduling transmissions of groups of stations within certain periods of time or windows. With an appropriate configuration, the RAW feature reduces contention and improves energy efficiency. However, the standard specification does not provide mechanisms for the optimal setting of RAW parameters. In this way, this paper presents a grouping strategy based on a genetic algorithm (GA) for IEEE 802.11ah networks operating under the RAW mechanism and considering heterogeneous stations, that is, stations using different modulation and coding schemes (MCS). We define a fitness function from the combination of the predicted system throughput and fairness, and provide the tuning of the GA parameters to obtain the best result in a short time. The paper also includes a comparison of different alternatives with regard to the stages of the GA, i.e., parent selection, crossover, and mutation methods. As a proof of concept, the proposed GA-based RAW grouping is tested on a more constrained device, a Raspberry Pi 3B+, where the grouping method converges in around 5 s. The evaluation concludes with a comparison of the GA-based grouping strategy with other grouping approaches, thus showing that the proposed mechanism provides a good trade-off between throughput and fairness performance.

Preparing Wi-Fi 7 for Healthcare Internet-of-Things.

The healthcare Internet of Things (H-IoT) is an interconnection of devices capable of sensing and transmitting information that conveys the status of an individual's health. The continuous monitoring of an individual's health for disease diagnosis and early detection is an important application of H-IoT. Ambient assisted living (AAL) entails monitoring a patient's health to ensure their well-being. However, ensuring a limit on transmission delays is an essential requirement of such monitoring systems. The uplink (UL) transmission during the orthogonal frequency division multiple access (OFDMA) in the wireless local area networks (WLANs) can incur a delay which may not be acceptable for delay-sensitive applications such as H-IoT due to their random nature. Therefore, we propose a UL OFDMA scheduler for the next Wireless Fidelity (Wi-Fi) standard, the IEEE 802.11be, that is compliant with the latency requirements for healthcare applications. The scheduler allocates the channel resources for UL transmission taking into consideration the traffic class or access category. The results demonstrate that the proposed scheduler can achieve the required latency for H-IoT applications. Additionally, the performance in terms of fairness and throughput is also superior to state-of-the-art schedulers.

Bandwidth-Based Wake-Up Radio Solution through IEEE 802.11 Technology.

IEEE 802.11 consists of one of the most used wireless access technologies, which can be found in almost all consumer electronics devices available. Recently, Wake-up Radio (WuR) systems have emerged as a solution for energy-efficient communications. WuR mechanisms rely on using a secondary low-power radio interface that is always in the active operation mode and is in charge of switching the primary interface, used for main data exchange, from the power-saving state to the active mode. In this paper, we present a WuR solution based on IEEE 802.11 technology employing transmissions of legacy frames by an IEEE 802.11 standard-compliant transmitter during a Transmission Opportunity (TXOP) period. Unlike other proposals available in the literature, the WuR system presented in this paper exploits the PHY characteristics of modern IEEE 802.11 radios, where different signal bandwidths can be used on a per-packet basis. The proposal is validated through the Matlab software tool, and extensive simulation results are presented in a wide variety of scenario configurations. Moreover, insights are provided on the feasibility of the WuR proposal for its implementation in real hardware. Our approach allows the transmission of complex Wake-up Radio signals (i.e., including address field and other binary data) from legacy Wi-Fi devices (from IEEE 802.11n-2009 on), avoiding hardware or even firmware modifications intended to alter standard MAC/PHY behavior, and achieving a bit rate of up to 33 kbps.

IEEE 802.11-Enabled Wake-Up Radio: Use Cases and Applications.

IEEE 802.11 is one of the most commonly used radio access technologies, being present in almost all handheld devices with networking capabilities. However, its energy-hungry communication modes are a challenge for the increased battery lifetime of such devices and are an obstacle for its use in battery-constrained devices such as the ones defined by many Internet of Things applications. Wake-up Radio (WuR) systems have appeared as a solution for increasing the energy efficiency of communication technologies by employing a secondary low-power radio interface, which is always in the active state and switches the primary transceiver (used for main data communication) from the energy-saving to the active operation mode. The high market penetration of IEEE 802.11 technology, together with the benefits that WuR systems can bring to this widespread technology, motivates this article's focus on IEEE 802.11-based WuR solutions. More specifically, we elaborate on the feasibility of such IEEE 802.11-based WuR solutions, and introduce the latest standardization efforts in this IEEE 802.11-based WuR domain, IEEE 802.11ba, which is a forthcoming IEEE 802.11 amendment, discussing its main features and potential use cases. As a use case consisting of green Wi-Fi application, we provide a proof-of-concept smart plug system implemented by a WuR that is activated remotely using IEEE 802.11 devices, evaluate its monetary and energy savings, and compare it with commercially available smart plug solutions. Finally, we discuss novel applications beyond the wake-up functionality that IEEE 802.11-enabled WuR devices can offer using a secondary radio, as well as applications that have not yet been considered by IEEE 802.11ba. As a result, we argue that the IEEE 802.11-based WuR solution will support a wide range of devices and deployments, for both low-rate and low-power communications, as well as high-rate transmissions.

IEEE 802.11ah: A Technology to Face the IoT Challenge.

Since the conception of the Internet of things (IoT), a large number of promising applications and technologies have been developed, which will change different aspects in our daily life. This paper explores the key characteristics of the forthcoming IEEE 802.11ah specification. This future IEEE 802.11 standard aims to amend the IEEE 802.11 legacy specification to support IoT requirements. We present a thorough evaluation of the foregoing amendment in comparison to the most notable IEEE 802.11 standards. In addition, we expose the capabilities of future IEEE 802.11ah in supporting different IoT applications. Also, we provide a brief overview of the technology contenders that are competing to cover the IoT communications framework. Numerical results are presented showing how the future IEEE 802.11ah specification offers the features required by IoT communications, thus putting forward IEEE 802.11ah as a technology to cater the needs of the Internet of Things paradigm.