Integrated assessment techniques for linking kinematics, kinetics and muscle activation to early migration: a pilot study.

The goal of this pilot study was to develop and test an integrated method to assess kinematics, kinetics and muscle activation of total knee prostheses during dynamic activities, by integrating fluoroscopic measurements with force plate, electromyography and external motion registration measurements. Subsequently, this multi-instrumental analysis was then used to assess the relationship between kinematics, kinetics and muscle activation and early migration of the tibial component of total knee prostheses. This pilot study showed that it is feasible to integrate fluoroscopic, kinematic and kinetic measurements and relate findings to early migration data. Results showed that there might be an association between deviant kinematics and early migration in patients with a highly congruent mobile-bearing total knee prosthesis. Patients that showed high levels of coactivation, diverging axial rotations of the insert and a deviant pivot point showed increased migration and might be at higher risk for tibial component loosening. In the future, to confirm our findings, the same integrated measurements have to be performed in larger patient groups and different prosthesis designs.

Co-contraction in RA patients with a mobile bearing total knee prosthesis during a step-up task.

It was hypothesized that rheumatoid arthritis (RA) patients with a total knee prosthesis that allows axial rotation of the bearing (MB) will show more co-contraction to stabilize the knee joint during a step-up task than RA patients with a fixed bearing total knee prosthesis (FB) where this rotational freedom is absent while having the same articular geometry. Surface EMG, kinematics and kinetics about the knee were recorded during a step-up task of a MB group (n = 5), a FB group (n = 4) and a control group (n = 8). Surface EMG levels of thigh muscles were calibrated to either knee flexion or extension moments by means of isokinetic contractions on a dynamometer. During the step-up task co-contraction indices were determined from an EMG-force model. Controls showed a higher active ROM during the step-up task than the patient group, 96 degrees versus 88 degrees (P = 0.007). In the control group higher average muscle extension, flexion and net moments during single limb support phase were observed than in the patient group. During the 20-60% interval of the single limb support, MB patients showed a significant higher level of flexor activity, resulting in a lower net joint moment, however co-contraction levels were not different. Compared to the control group arthroplasty patients showed a 40% higher level of co-contraction during this interval (P = 0.009). Control subjects used higher extension moments, resulting in a higher net joint moment. Visual analysis revealed a timing difference between the MB and FB group. The FB group seems to co-contract approximately 20% later compared to the MB group. RA patients after total knee arthroplasty show a lower net knee joint moment and a higher co-contraction than controls indicating avoidance of net joint load and an active stabilization of the knee joint. MB and FB patients showed no difference in co-contraction levels, although timing in FB is closer to controls than MB subjects. Since visual analysis revealed a timing difference between the MB and FB group, this may express compensation by coordination. Rehabilitation programs for RA patients should include besides muscle strength training, elements of muscle-coordination training.

Effect of glucosamine sulfate on hip osteoarthritis: a randomized trial.

BACKGROUND: The effectiveness of glucosamine sulfate as a symptom and disease modifier for osteoarthritis is still under debate. OBJECTIVE: To assess whether glucosamine sulfate has an effect on the symptoms and structural progression of hip osteoarthritis during 2 years of treatment. DESIGN: Randomized, controlled trial. SETTING: Primary care in the Netherlands. PATIENTS: 222 patients with hip osteoarthritis who were recruited by their general practitioner. Patients were eligible if they met the American College of Rheumatology clinical criteria for hip osteoarthritis. INTERVENTION: 2 years of treatment with 1500 mg of oral glucosamine sulfate or placebo once daily. MEASUREMENTS: Primary outcome measures were Western Ontario and McMaster Universities (WOMAC) pain and function subscales over 24 months and joint space narrowing after 24 months. The main secondary outcome measures were WOMAC pain, function, and stiffness after 3, 12, and 24 months. RESULTS: At baseline, both groups were similar in demographic and clinical variables. Overall, WOMAC pain did not differ (mean difference [glucosamine sulfate minus placebo], -1.54 [95% CI, -5.43 to 2.36]), nor did WOMAC function (mean difference, -2.01 [CI, -5.38 to 1.36]). Joint space narrowing also did not differ after 24 months (mean difference, -0.029 [CI, -0.122 to 0.064]). Only 1 of the sensitivity analyses, based on extreme assumptions regarding missing assessments due to total hip replacement, provided results consistent with a glucosamine effect. LIMITATIONS: Twenty patients had total hip replacement during the trial. Half of the patients had a Kellgren and Lawrence score of 1. CONCLUSION: Glucosamine sulfate was no better than placebo in reducing symptoms and progression of hip osteoarthritis. International Standard Randomised Controlled Trial Number: ISRCTN54513166.

Assessment of three-dimensional stent-graft dynamics by using fluoroscopic roentgenographic stereophotogrammetric analysis.

OBJECTIVE: To validate the use of fluoroscopic roentgenographic stereophotogrammetric analysis (FRSA) for its feasibility and accuracy for measuring the three-dimensional dynamic motion of stent grafts. METHODS: A digital biplane fluoroscopy setup was calibrated (Siemens Axiom Artis dBc). Stereo images were acquired of a static aortic model with a stent graft in different axial positions, imposed by a micromanipulator. The three-dimensional measurement error of FRSA was determined by comparing FRSA measurements with the micromanipulator. An aortic model with a stent graft was constructed and connected to an artificial circulation with a physiological flow and pressure profile. Markers were added to the spine (tantalum spherical markers; diameter 1 mm) and stent (welding tin; diameter 1 mm). The three-dimensional measurement precision was determined by measuring the position of a single (stable) spine marker during two pulsatile cycles. Finally, three-dimensional stent marker motion was analyzed with a frame rate of 30 images per second, including three-dimensional marker position (change), diameter change, and center of circle position change. RESULTS: The mean error of FRSA measurement of displacement was 0.003 mm (SD, 0.019 mm; maximum error, 0.058 mm). A very high precision of position measurement was found (SD, 0.009-0.015 mm). During pulsatile motion, the position (changes) of the markers could be assessed in the x, y, and z directions, as well as the stent diameter change and center of circle position change. CONCLUSIONS: FRSA has proven to be a method with very high accuracy and temporal resolution to measure three-dimensional stent-graft motion in a pulsatile environment. This technique has the potential to contribute significantly to the knowledge of stent-graft behavior after endovascular aneurysm repair and improvements in stent-graft design. The technique is ready for clinical testing.

Accurate detection of stent-graft migration in a pulsatile aortic model using Roentgen stereophotogrammetric analysis.

PURPOSE: To evaluate the feasibility and accuracy of Roentgen stereophotogrammetric analysis (RSA) versus computed tomography (CT) for detecting stent-graft migration in an in vitro pulsatile circulation model and to study the feasibility of a nitinol endovascular clip (NEC) as an aortic wall reference marker for RSA. METHODS: An aortic model with stent-graft was constructed and connected to an artificial circulation with a physiological flow and pressure profile. Tantalum markers and NECs were used as aortic reference markers for RSA analysis. Stent-graft migrations were measured during pulsatile circulation with RSA and CT. CT images acquired with 64 x 0.5-mm beam collimation were analyzed with Vitrea postprocessing software using a standard clinical protocol and central lumen line reconstruction. RSA in the model with the circulation switched off was used as the reference standard to determine stent-graft migration. The measurement errors of RSA and CT were determined during pulsatile circulation. RESULTS: The mean measurement error +/- standard deviation (maximum) of RSA during pulsatile circulation using the tantalum markers was -0.5+/-0.16 (0.7) mm. Using the NEC, the mean (maximum) measurement error was -0.4+/-0.25 (1.1) mm. The mean (maximum) measurement error of CT was -1.1+/-1.17 (2.8) mm. CONCLUSION: RSA is an accurate and feasible tool to measure stent-graft migration in a pulsatile environment. Migration measurement with RSA was more accurate than CT in this experimental setup. The nitinol clip tested in this study is potentially feasible as an aortic reference marker in patients after endovascular repair.

Roentgen stereophotogrammetric analysis: an accurate tool to assess stent-graft migration.

PURPOSE: To evaluate in an in vitro model the feasibility and accuracy of Roentgen stereophotogrammetric analysis (RSA) versus computed tomography (CT) for the ability to detect stent-graft migration. METHODS: An aortic model was constructed from a 22-mm-diameter Plexiglas tube with 6-mm polytetrafluoroethylene inlays to mimic the renal arteries. Six tantalum markers were placed in the wall of the aortic tube proximal to the renal arteries. Another 6 markers were added to a Gianturco stent, which was cast in Plexiglas and placed inside the aorta and fixed to a micromanipulator to precisely control displacement of the stent along the longitudinal axis. Sixteen migrations were analyzed with RSA software and compared to the micromanipulator. Thirty-two migrations were measured by 3 observers from CT images acquired with 16x0.5-mm beam collimation and reconstructed with a 0.5-mm slice thickness and a 0.4-mm reconstruction interval. Measurements were made with Vitrea postprocessing software using a standard clinical protocol and central lumen line reconstruction. Results of CT were also compared to the micromanipulator. RESULTS: The mean RSA measurement error compared to the micromanipulator was 0.002+/-0.044 mm, and the maximum error was 0.10 mm. There was no statistically significant interobserver variability for CT (p=0.17). The pooled mean (maximum) measurement error of CT was 0.14+/-0.29 (1.00) mm, which was significantly different from the RSA measurement error (p<0.0001). CONCLUSION: Detection of endograft migration by RSA is feasible and was significantly more accurate than CT in this nonpulsatile in vitro model.

Effects of ligament sectioning on the kinematics of the distal tibiofibular syndesmosis: a radiostereometric study of 10 cadaveric specimens based on presumed trauma mechanisms with suggestions for treatment.

BACKGROUND: Syndesmotic injuries of the ankle without fractures can result from external rotation, abduction and dorsiflexion injuries. Kinematic studies of these trauma mechanisms have not been performed. We attempted to describe the kinematics of the tibiofibular joint in cadaveric specimens using radiostereometry after sequential ligament sectioning, and resulting from different trauma mechanisms and axial loading, in order to put forward treatment guidelines for the different types of syndesmotic injuries. METHODS: We assessed the kinematics of the distal tibiofibular joint in fresh-frozen cadaveric specimens using radiostereometry in the intact situation, and after alternating and sequential sectioning of the distal tibiofibular and anterior deltoid ligaments. To assess which of the known trauma mechanisms would create the largest displacements at the syndesmosis, the ankle was brought into the following positions under an axial load that was comparable to body weight (750 N): neutral, dorsiflexion, external rotation, abduction, and a combination of external rotation and abduction. RESULTS: In the neutral position, the largest displacements of the fibula consisted of external rotation and posterior translation. Loading of the ankle with 750 N did not apparently increase or decrease the displacements of the fibula, but gave a larger variety of displacements. In every position, sectioning of a ligament resulted in some fibular displacement. Sectioning of the anterior tibiofibular ligament (ATiFL) invariably resulted in external rotation of the fibula. Additional sectioning of the anterior part of the deltoid ligament (AD) gave a larger variety of displacements. In general, sectioning of the posterior tibiofibular ligament (PTiFL) gave the smallest displacements. Combined sectioning of the ATiFL and the PTiFL resulted in a larger variety of displacements in the neutral position. Sectioning of the AD together with the ATiFL and PTiFL resulted in tibiofibular displacements in the neutral situation exceeding the maximum values found in the intact situation, the most important being fibular external rotation. INTERPRETATION: Sectioning of the ATiFL results in mechanical instability of the syndesmosis. Of all trauma mechanisms, external rotation of the ankle resulted in the largest and most consistent displacements of the fibula relative to the tibia found at the syndesmosis. Based on our findings and the current literature, we recommend that patients with isolated PTiFL or AD injuries should be treated functionally when no other injuries are present. Patients with acute complete ATiFL ruptures, or combined ATiFL and AD ruptures should be treated with immobilization in a plaster. Patients with combined ruptures of the ATiFL, AD and PTiFL need to be treated with a syndesmotic screw.

Periapatite may not improve micromotion of knee prostheses in rheumatoid arthritis.

UNLABELLED: Prosthesis migration in bone inevitably occurs in cemented and uncemented total knee arthroplasty tibial components. Cemented designs as the gold standard give immediate fixation whereas cementless designs need a period of bone ingrowth onto the surface irregularities of the implants. The addition of bioactive coatings may enhance this process of ingrowth. A controlled randomized prospective RSA study was carried out on 26 Duracon implants in a rheumatoid arthritis patient group to evaluate the effect of a periapatite coating on the fixation of the tibial tray. The coated and the noncoated groups were matched for sex, age, body mass index, and HSS Knee Score. Stage of preoperative joint destruction and preoperative and postoperative mechanical leg axis showed no differences. We saw no differences in migration between the two groups, but a trend for lesser translations along and rotations about all three axes in the periapatite group. The periapatite-coated components showed a lower variance in subsidence than did the uncoated components. Both groups also showed a high variance in anterior tilting of the components. The cementless PA-coated Duracon prosthesis used in patients with RA may provide improved fixation of tibial components although we could not demonstrate improvement in this small controlled series. LEVEL OF EVIDENCE: Therapeutic Level II. See the Guidelines for Authors for a complete description of levels of evidence.

Kinematics before and after reconstruction of the anterior syndesmosis of the ankle: A prospective radiostereometric and clinical study in 5 patients.

BACKGROUND: We have previously shown that patients with instability of the anterior syndesmosis benefit from an anatomical reconstruction. It is not known whether this is because of restored kinematics. METHODS: In a prospective study of 5 patients, we assessed clinical findings and tibiofibular kinematics, evaluated by radiostereometry, before and after reconstruction of a chronic syndesmotic injury. RESULTS: We found no statistically significant differences in tibiofibular kinematics before and after reconstruction. The kinematics of the fibula relative to the tibia during external rotation stress differed from that known in asymptomatic volunteers, but the differences were not typical enough to differentiate between patients and healthy subjects. Clinical examination and ankle scores, however, showed that all patients benefited from reconstruction of the anterior syndesmosis. INTERPRETATION: Radiostereometry is not an adequate technique to diagnose chronic syndesmotic instability or to demonstrate restoration of the kinematics of the ankle as a cause of the beneficial effect of anatomical reconstruction of the syndesmosis.

Comparison of micromotion in mobile bearing and posterior stabilized total knee prostheses: a randomized RSA study of 40 knees followed for 2 years.

BACKGROUND: On theoretical grounds mobile bearing total knees should reduce the micromotion of the tibial component relative to the bone. PATIENTS AND METHODS: We used radiostereometric analysis to measure the three-dimensional micromotio in 42 tibial components during 2 years of follow-up. The patients had been randomized as to whether they would receive a mobile bearing (MB) or posterior stabilized (PS) design. We expected that the MB knee would facilitate dissipation of forces from the prosthesis-bone interface by the motion of the bearing and by load sharing with the soft tissues, leading to less micromotion. In the PS designs, limited free rotation caused by the cam-post articulation might cause additional stress at the bone prosthesis interface. RESULTS: We found no significant differences between the MB and PS group at the 2-year follow-up evaluation with respect to Knee Society scores and radiographi results. The PS group had a higher variability in subsidence and anterior-posterior tilting of the component than the MB group. INTERPRETATION: The low variability of the data in the MB knee prosthesis group suggests that this design more predictable and forgiving with respect to micromotion of the tibial component.

Influence of cement viscosity and cement mantle thickness on migration of the Exeter total hip prosthesis.

The effect of bone cement viscosity and cement mantle thickness on the migration of the Exeter total hip prosthesis was studied in a prospective, randomized, double-blind clinical Roentgen Stereophotogrammetric Analysis study. Forty-one cemented total hip arthroplasty in 39 patients were included and randomized into a low/medium Simplex P cement group and a high-viscosity Simplex AF cement group. At time of stem introduction, 5 minutes after mixing, the Simplex AF was more viscous than Simplex P. No statistical difference existed between the 2 cement groups, for neither translation nor rotation migration data. Subsidence of the stem at 2-year follow-up was 1.1 +/- 0.56 mm for Simplex AF cement and 1.5 +/- 1.00 mm for Simplex P cement. The mean rotation of the acetabular components about the sagittal axis was 1.7 degrees +/- 3.8 degrees in the Simplex AF group and 0.7 degrees +/- 2.1 degrees for the Simplex P group. No effect of cement mantle thickness on migration of neither the acetabular cups nor the femoral stems was found. Although there were no differences in migration data for the cups and the stems, 2 acetabular cups in the Simplex AF group (almost 10%) were revised because of mechanical loosening. Because of these findings, we suggest caution before using this new high-viscosity bone cement for fixation of acetabular components.

Increased muscle activity to stabilise mobile bearing knees in patients with rheumatoid arthritis.

The aim of this study was to assess the differences in muscle activity (surface EMG) between a posterior stabilised (PS) total knee design and a mobile bearing (MB) posterior cruciate ligament retaining design in rheumatoid arthritis (RA) patients during a step-up task. Four patients with a PS total knee prosthesis and three patients with a MB total knee prosthesis were selected based on pain score, knee function, range of motion and joint stability. Clinical scores and functional scores were comparable between the two groups pre-operatively and at the 1-year follow-up. Visual analysis of the EMG activity of the main flexor and extensor muscles showed that the activity of both extensor and flexor muscles of the MB group was on average higher compared to the PS group. When the maximum activities of the muscles were compared, the patients in the MB group showed a significant higher maximum peak activity (p<0.05) of the Vastus Medialis (VM), Vastus Lateralis (VL) and Semitendinosus (ST) during step-up than the patients in the PS group. Also the instance of activation of the Vastus Medialis and the Vastus Lateralis was significant earlier in the MB group compared to the PS group. Since the differences between the PS and the MB group did not only show an increase of muscle activity but also an earlier activation of the flexor muscles, this may express compensation by coordination. Rehabilitation programs for RA patients should include besides muscle strength training, elements of muscle-coordination training.

Marker Configuration Model-Based Roentgen Fluoroscopic Analysis.

It remains unknown if and how the polyethylene bearing in mobile bearing knees moves during dynamic activities with respect to the tibial base plate. Marker Configuration Model-Based Roentgen Fluoroscopic Analysis (MCM-based RFA) uses a marker configuration model of inserted tantalum markers in order to accurately estimate the pose of an implant or bone using single plane Roentgen images or fluoroscopic images. The goal of this study is to assess the accuracy of (MCM-Based RFA) in a standard fluoroscopic set-up using phantom experiments and to determine the error propagation with computer simulations. The experimental set-up of the phantom study was calibrated using a calibration box equipped with 600 tantalum markers, which corrected for image distortion and determined the focus position. In the computer simulation study the influence of image distortion, MC-model accuracy, focus position, the relative distance between MC-models and MC-model configuration on the accuracy of MCM-Based RFA were assessed. The phantom study established that the in-plane accuracy of MCM-Based RFA is 0.1 mm and the out-of-plane accuracy is 0.9 mm. The rotational accuracy is 0.1 degrees. A ninth-order polynomial model was used to correct for image distortion. Marker-Based RFA was estimated to have, in a worst case scenario, an in vivo translational accuracy of 0.14 mm (x-axis), 0.17 mm (y-axis), 1.9 mm (z-axis), respectively, and a rotational accuracy of 0.3 degrees. When using fluoroscopy to study kinematics, image distortion and the accuracy of models are important factors, which influence the accuracy of the measurements. MCM-Based RFA has the potential to be an accurate, clinically useful tool for studying kinematics after total joint replacement using standard equipment.

Kinematics of the distal tibiofibular syndesmosis: radiostereometry in 11 normal ankles.

In 11 healthy volunteers, the normal kinematics of the tibiofibular syndesmosis of the ankle during weight bearing and external rotation stress were compared to a nonweight-bearing neutral position by radiostereometry. We found very small rotations and displacements in this "normal" group, which indicated that the fibula is closely attached to the tibia, thereby preventing larger movements at the level of the ankle. We found no common kinematic pattern during weight bearing in the neutral position. Application of a 75 Nm external rotation moment on the foot caused external rotation of the fibula between 2 and 5 degrees, medial translation between 0 and 2.5 mm and posterior displacement between 1.0 and 3.1 mm. These data can be used as normal reference values for studies of patients with suspected syndesmotic injuries.

External rotation stress imaging in syndesmotic injuries of the ankle: comparison of lateral radiography and radiostereometry in a cadaveric model.

We compared the value of 7.5 Nm external rotation stress in diagnosing tibiofibular syndesmotic injuries of the ankle on lateral radiographs with radiostereometric analysis (RSA) in 10 cadaveric legs. After sectioning 2 ligaments, RSA showed an increase in posterior translation and external rotation of the fibula. This increase in posterior translation was smaller than the posterior displacement of the fibula on the lateral radiograph, and RSA showed mainly an increase in external rotation of the fibula that can not be measured on conventional radiographs. We conclude that instability of the syndesmosis in cadaveric ankles can be detected with 7.5 Nm external rotation stress RSA, but that external rotation stress lateral radiography is unreliable.

Factors associated with excessive migration in bone impaction hip revision surgery: a radiostereometric analysis study.

A prospective radiostereometric analysis (RSA) study of 18 patients with cemented revision hip surgery and impaction grafting with an Exeter stem was done with a follow-up of 2 years for all patients. All factors that could influence migration (ie, micromotion) of the stem were analyzed with a repeated measurements analysis of variance. Two groups could be identified: a stable group and a continuous migrating group. Two factors significantly influenced micromotion during the follow-up measurements. The first factor was the Paprosky classification (the bigger the defect, the higher the micromotion). The second factor was cement mantle defects in > or =1 Gruen zones. The migrating hip stems had more Gruen zones with cement mantle defects (45%) compared with the stable prostheses (21%). The effect of the first factor on micromotion was limited and probably clinically less relevant. Because the cement mantle defects found in this study were caused by poor instrumentation, the second factor stresses the importance of good instrumentation, which is essential to make this technically demanding technique effective in creating a stable stem-allograft construct in the defective femoral canal.

Micromotion of the Souter-Strathclyde total elbow prosthesis in patients with rheumatoid arthritis 21 elbows followed for 2 years.

21 elbows in 18 patients with rheumatoid arthritis were treated with a Souter-Strathclyde total elbow prosthesis. 18 elbows were included in a radiostereometry (RSA) study. The aim of this clinical RSA study was to assess the three-dimensional micromotion pattern of the Souter-Strathclyde prosthesis, and thereby gain insight in the aseptic loosening process of this prosthesis. Implants were defined as at risk of aseptic loosening when the translation rate during the second postoperative year was more than 0.4 mm along one or more coordinate axes and/or the rate of rotation was more than 1 degrees about one or more coordinate axes. Clinical examination revealed an increase in the range of motion and a marked reduction in pain. The RSA showed that 8 of 18 humeral components were at risk of aseptic loosening, although no signs of such loosening-defined as a complete radiolucent line of 2 mm or more-were found on the plain radiographs. In 7 humeral components, an anterior tilt about the transverse axis was seen that resulted in an anterior translation of the proximal tip and a posterior translation of the component's trochlea. Long-term studies of the Souter-Strathclyde prosthesis, have shown that this rotation is a specific pattern of failure in some implants. None of the ulnar components was at risk for aseptic loosening. Improvements in fixation of the Souter-Strathclyde total elbow arthroplasty should focus on the humeral component. At present, the lateral flange of the implant is enlarged to improve rotational stability about the transverse and longitudinal axes. The effect of this change in design on micromotion of the Souter-Strathclyde total elbow prosthesis will be studied in a randomized RSA study comparing the new design to the existing one.