The Impact of Phospholipid-Based Liquid Crystals' Microstructure on Stability and Release Profile of Ascorbyl Palmitate and Skin Performance.

The drug delivery potential of liquid crystals (LCs) for ascorbyl palmitate (AP) was assessed, with the emphasis on the AP stability and release profile linked to microstructural rearrangement taking place along the dilution line being investigated by a set of complementary techniques. With high AP degradation observed after 56 days, two stabilization approaches, i.e., the addition of vitamin C or increasing AP concentration, were proposed. As a rule, LC samples with the lowest water content resulted in better AP stability (up to 52% of nondegraded AP in LC1 after 28 days) and faster API release (~18% in 8 h) as compared to the most diluted sample (29% of nondegraded AP in LC8 after 28 days, and up to 12% of AP released in 8 h). In addition, LCs exhibited a skin barrier-strengthening effect with up to 1.2-fold lower transepidermal water loss (TEWL) and 1.9-fold higher skin hydration observed in vitro on the porcine skin model. Although the latter cannot be linked to LCs' composition or specific microstructure, the obtained insight into LCs' microstructure contributed greatly to our understanding of AP positioning inside the system and its release profile, also influencing the overall LCs' performance after dermal application.

Lyophilised protein formulations as a patient-centric dosage form: A contribution toward sustainability paradigm.

At present, society has embraced the fact apropos population aging and climate changes, that demand, amongst others, innovative pharmaceutical technologies, emphasising the development of patient-specific delivery systems and thus the provision of efficient and sustainable drugs. Protein drugs for subcutaneous administration, by allowing less frequent application, represent one of the most important parts of the pharmaceutical field, but their development is inevitably faced with obstacles in providing protein stability and suitable formulation viscosity. To gain further knowledge and fill the gaps in the already constructed data platform for the development of monoclonal antibody formulations, we designed a study that examines small model proteins, i.e., bovine serum albumin. The main aim of the presented work is to evaluate the effect of protein concentrations on critical quality attributes of both, pre-lyophilised liquid formulations, and lyophilised products. Through the study, the hypothesis that increasing protein concentration leads to higher viscosity and higher reconstitution time without affecting the stability of the protein was confirmed. The most important finding is that sucrose plays a key role in the lyophilisation of investigated protein, nevertheless, it can be predicted that, to ensure the beneficial effect of mannitol, its amount has to prevail over the amount of sucrose.

Mucoadhesive film for oral delivery of vaccines for protection of the respiratory tract.

The delivery of vaccines plays a pivotal role in influencing the strength and longevity of the immune response and controlling reactogenicity. Mucosal immunization, as compared to parenteral vaccination, could offer greater protection against respiratory infections while being less invasive. While oral vaccination has been presumed less effective and believed to target mainly the gastrointestinal tract, trans-buccal delivery using mucoadhesive films (MAF) may allow targeted delivery to the mucosa. Here we present an effective strategy for mucosal delivery of several vaccine platforms incorporated in MAF, including DNA plasmids, viral vectors, and lipid nanoparticles incorporating mRNA (mRNA/LNP). The mRNA/LNP vaccine formulation targeting SARS-CoV-2 as a proof of concept remained stable within MAF consisting of slowly releasing water-soluble polymers and an impermeable backing layer, facilitating enhanced penetration into the oral mucosa. This formulation elicited antibody and cellular responses comparable to the intramuscular injection, but also induced the production of mucosal IgAs, highlighting its efficacy, particularly for use as a booster vaccine and the potential advantage for protection against respiratory infections. The MAF vaccine preparation demonstrates significant advantages, such as efficient delivery, stability, and simple noninvasive administration with the potential to alleviate vaccine hesitancy.

Lipid-based systems with precipitation inhibitors as formulation approach to improve the drug bioavailability and/or lower its dose: a review.

Lipid-based systems, such as self-microemulsifying systems (SMEDDS) are attracting strong attention as a formulation approach to improve the bioavailability of poorly water-soluble drugs. By applying the "spring and parachute" strategy in designing supersaturable SMEDDS, it is possible to maintain the drug in the supersaturated state long enough to allow absorption of the complete dose, thus improving the drug's bio-availability. As such an approach allows the incorporation of larger amounts of the drug in equal or even lower volumes of SMEDDS, it also enables the production of smaller final dosage forms as well as decreased gastrointestinal irritation, being of particular importance when formulating dosage forms for children or the elderly. In this review, the technological approaches used to prolong the drug supersaturation are discussed regarding the type and concentration of polymers used in liquid and solid SMEDDS formulation. The addition of hypromellose derivatives, vinyl polymers, polyethylene glycol, polyoxyethylene, or polymetacrylate copolymers proved to be effective in inhibiting drug precipitation. Regarding the available literature, hypromellose has been the most commonly used polymeric precipitation inhibitor, added in a concentration of 5 % (m/m). However, the inhibiting ability is mainly governed not only by the physicochemical properties of the polymer but also by the API, therefore the choice of optimal precipitation inhibitor is recommended to be evaluated on an individual basis.

Nanofibers with genotyped Bacillus strains exhibiting antibacterial and immunomodulatory activity.

Biofilm-associated diseases such as periodontitis are widespread and challenging to treat which calls for new strategies for their effective management. Probiotics represent a promising approach for targeted treatment of dysbiosis in biofilm and modulation of host immune response. In this interdisciplinary study, nanofibers with two autochthonous Bacillus strains 27.3.Z and 25.2.M were developed. The strains were isolated from the oral microbiota of healthy individuals, and their genomes were sequenced and screened for genes associated with antimicrobial and immunomodulatory activities, virulence factors, and transferability of resistance to antibiotics. Spores of two Bacillus strains were incorporated individually or in combination into hydrophilic poly(ethylene oxide) (PEO) and composite PEO/alginate nanofibers. The nanofiber mats were characterised by a high loading of viable spores (> 7 log CFU/mg) and they maintained viability during electrospinning and 6 months of storage at room temperature. Spores were rapidly released from PEO nanofibers, while presence of alginate in the nanofibers prolonged their release. All formulations exhibited swelling, followed by transformation of the nanofiber mat into a hydrogel and polymer erosion mediating spore release kinetics. The investigated Bacillus strains released metabolites, which were not cytotoxic to peripheral blood mononuclear cells (PBMCs) in vitro. Moreover, their metabolites exhibited antibacterial activity against two periodontopathogens, an antiproliferative effect on PBMCs, and inhibition of PBMC expression of proinflammatory cytokines. In summary, the developed nanofiber-based delivery system represents a promising therapeutic approach to combat biofilm-associated disease on two fronts, namely via modulation of the local microbiota with probiotic bacteria and host immune response with their metabolites.

Water-soluble chitosan eases development of mucoadhesive buccal films and wafers for children.

Oromucosal films and wafers are user-friendly solid dosage forms offering easy and convenient administration, as well as rapid or controlled drug delivery. The aim of this study was to develop prednisolone containing child-friendly chitosan-based mucoadhesive films and wafers with a prolonged residence time on the buccal mucosa. Four different chitosan types (different molecular weights, degree of deacetylation (DDA), pattern of deacetylation) were studied for films prepared by solvent-cast-evaporation and wafers by freeze-drying. Mucoadhesive properties correlated with swelling abilities and were dependent on the chitosan type, the solvent, and the preparation method. Mucoadhesive forces were higher for formulations containing chitosan with higher DDA and for wafers compared to films. The drug release was relatively fast, especially for films (approx. 90 % in 15 minutes) and steadier for wafers (90 % in 45-120 minutes). Permeability was evaluated using artificial membranes and HT29-MTX cell-monolayers. The developed formulations exhibited good biocompatibility. Organoleptic properties can be improved by choosing a homogenously deacetylated chitosan type that provides a more neutral pH. Using hydroxypropyl-beta-cyclodextrin-complexation for taste masking of bitter drugs also reduced wafers' drug release rate. Mucoadhesive wafers are promising alternatives to films with a slower drug release rate and stronger mucoadhesion.

Applicability of Raman and near-infrared spectroscopy in the monitoring of freeze-drying injectable ibuprofen.

The freeze-drying process is an expensive, time-consuming and rather complex process. Therefore, process analytical technology (PAT) tools have been introduced to develop an optimized process and control critical process parameters, which affect the final product quality. The aim of the present work was to study the applicability of at-line near-infrared (NIR) and Raman spectroscopy approach in the monitoring of the freeze-drying process. Freeze-dried powders, which were developed previously, were manufactured as a multi-component system, containing ibuprofen (IBP). The NIR proved to be a useful tool for the monitoring of the freeze-drying process, since it was able to determine residual moisture content (RMC) and hence predict its values by using the partial least square (PLS) model. In addition, the evaluation of the correlation between the NIR and off-line HPLC IBP content results showed that NIR spectra were consistent with the HPLC measurements, even though overlapping absorption bands in multi-component system were observed. This research also studied the ability of using the at-line Raman measurements for the evaluation of the crystallinity and polymorphic transformations during the process, such as IBP ionization and mannitol polymorphism. The results were in correlation with XRPD results, but parameters of PLS models were not optimal. Nevertheless, this approach still assured better process understanding. To conclude, high applicability of the at-line NIR in the monitoring of the freeze-dried powder production was successfully demonstrated, suggesting that it can be used as a single tool to monitor RMC and IBP content as well as process deviations during the freeze-drying process.

Investigation of design space for freeze-drying injectable ibuprofen using response surface methodology.

This study explores the use of a statistical model to build a design space for freeze-drying two formulations with ibuprofen. A 2 × 3 factorial experimental design was used to evaluate independent variables (filling volume and annealing time) and responses as residual moisture content, specific surface area and reconstitution time. A statistical model and response surface plots were generated to define the interactions among the selected variables. The models constructed for both formulations suggest that 1 mL of filled volume and no annealing should be used to achieve optimal residual moisture content, specific surface area and reconstitution time. The proposed models were validated with additional experiments, in which the responses observed were mainly in close agreement with the predicted ones. Additionally, the established models demonstrate the reliability of the evaluation procedure in predicting the selected responses.

Solidification of SMEDDS by fluid bed granulation and manufacturing of fast drug release tablets.

Solidification of self-microemulsifying drug delivery systems (SMEDDS) is a rising experimental field with important potential for pharmaceutical industry, however fluid-bed granulation with SMEDDS is yet an unexplored solidification technique. The aim of the study was to solidify carvedilol-loaded SMEDDS utilizing fluid bed granulation process and to investigate how the formulation variables (type of solid carrier, optimization of granulation dispersion) and fluid-bed granulation process variables can be optimized in order to achieve suitable agglomeration process, high drug loading and appropriate product characteristics. Obtained granulates exhibited complete drug release, comparable to liquid SMEDDS and superior to crystalline carvedilol, nevertheless compromise between large SMEDDS loading and appropriate flow properties of the granules has to be made. Representative granulates with highest drug loading were further compressed into tablets. It was shown that the optimal excipient selection of compression mixture and compression force can lead to fast carvedilol release even from the tablets. Selfmicroemulsifying properties were not impaired neither after the solidification process and nor after the compression of solid SMEDDS into tablets. This suggests that fluid-bed granulation with SMEDDS offers a perspective alternative for solidification of the SMEDDS, enabling preservation of self-microemulsifying properties, acceptable drug loading and complete drug release.

Lamellar liquid crystals maintain keratinocytes' membrane fluidity: An AFM qualitative and quantitative study.

Despite extensive investigations of lamellar liquid crystals for dermal application, the effects of these systems at the cellular level are still not well elucidated. The key aim of this study was to determine the elasticity and morphological features of keratinocytes after exposure to a lamellar liquid crystal system (LLCS) using atomic force microscopy (AFM) as the method of choice. Prior to AFM assessment, a cell proliferation test and light plus fluorescence imaging were applied to determine the sub-toxic concentration of LLCS. According to the AFM results, slightly altered morphology was observed in the case of fixed keratinocytes, while an intact morphology was visualized on live cells. From the quantitative study, decreased Young's moduli were determined for fixed cells (i.e., 8.6 vs. 15.2 MPa and 1.3 vs. 2.9 MPa for ethanol or PFA-fixed LLCS-treated vs. control cells, respectively) and live cells (i.e., ranging from 0.6 to 2.8 for LLCS-treated vs. 1.1-4.5 MPa for untreated cells), clearly demonstrating increased cell elasticity. This is related to improved membrane fluidity as a consequence of interactions between the acyl chains of cell membrane phosphatidylcholine and those of LLCS. What seems to be of major importance is that the study confirms the potential clinical relevance of such systems in treatment of aged skin with characteristically more rigid epithelial cells.

Solubilization of ibuprofen for freeze dried parenteral dosage forms.

Ibuprofen, a weakly acidic non-steroidal anti-inflammatory drug having poor aqueous solubility, is a challenging drug for the development of pharmaceutical formulations, resulting in numerous research attempts focusing on improvement of its solubility and consequently bioavailability. Most studies have been done for solid dosage forms, with very little attention paid to parenterals. Hence, the main purpose of the present study was to enhance ibuprofen solubility as a result of formulation composition and the freeze drying process. Moreover, the purpose was to prepare a freeze dried dosage form with improved ibuprofen solubility that could, after simple reconstitution with water for injection, result in an isotonic parenteral solution. Solubility of ibuprofen was modified by various excipients suitable for parenteral application. Drug interactions with selected excipients in the final product/lyophilisate were studied by a combined use of XRPD, DSC, Raman and ss-NMR. Analyses of lyophilized samples showed solubility enhancement of ibuprofen and in situ formation of an ibuprofen salt with the alkaline excipients used.

Self-microemulsifying tablets prepared by direct compression for improved resveratrol delivery.

The purpose of this study was to develop self-microemulsifying (SME-) tablets to improve resveratrol solubility whilst delivering resveratrol in a preferred tablet dosage form. Resveratrol was dissolved in liquid self-microemulsifying drug delivery system (SMEDDS) (10% w/w) and solidified through adsorption on several different solid carriers. Two ranges of synthetic amorphous silica (Sylysia® 290, 350, 470, 580; Syloid® 244FP, AL-1FP) as well as granulated magnesium aluminometasilicate (Neusilin® US2) were screened for their SMEDDS adsorbent capacity. The most efficient carrier from every range was chosen for further SME-tablet development. To counteract the high ratio of liquid in SME-tablets, additional dry binders (microcrystalline cellulose, copovidone) were added to the tableting mixture, as well as superdisintegrant (croscarmellose sodium) and lubricant (magnesium stearate). Finally, approx. 600 mg tablets were directly pressed using 12 mm flat face punch, containing 41.75% SMEDDS. Overall, all tablets exhibited sufficient hardness (>50 N), although it was negatively affected by higher compression force. Tablets with Neusilin® US2 proved to have highest hardness, as granulated structure of Neusilin® US2 provided best compaction properties needed for successful direct compression of tablets. All prepared SME tablet formulations disintegrated in under 10 min and formed microemulsions (droplet size < 100 nm) upon dilution with water, with Neusilin® US2 tablets exhibiting the lowest droplet size (<30 nm). While conventional dissolution test indicated incomplete resveratrol release from solid carriers in both pH 1.2 and 6.8 media, no difference fatty acid amount titrated during fasted state in vitro lipolysis between liquid and solid SMEDDS was observed. Moreover, accelerated stability tests confirmed over 90% of trans-resveratrol remained in solid SMEDDS following 90 days at 40 °C, with no crystallization of resveratrol observed during that time. To sum up, through adsorption on solid carriers, in particular Neusilin® US2, SMEDDS was successfully transformed into a directly compressible mixture and tableted without the loss of its self-microemulsifying ability.

Microstructure evaluation of dermally applicable liquid crystals as a function of water content and temperature: Can electron paramagnetic resonance provide complementary data?

Insight into the microstructure of lyotropic liquid crystals (LCs) is of crucial importance for development of novel dermal delivery systems. Our aim was to evaluate the phase behaviour of dermally applicable LCs composed of isopropyl myristate/Tween 80/lecithin/water, along the dilution line, where phase transitions are predominantly driven by increased water content. Additionally, identification of LC temperature dependence is of great importance for skin application. Selected LCs were evaluated using electron paramagnetic resonance (EPR) plus conventionally used methods of polarization microscopy, small-angle X-ray scattering, differential scanning calorimetry, and rheological measurements. Depending on water content, LCs formed diverse microstructures, from (pseudo)hexagonal (LC1) and lamellar (LC2-LC7) liquid crystalline phases that possibly co-exist with rod-like micelles (LC4-LC7), to a transitional micellar phase (LC8). Furthermore, the LCs microstructure remained unaltered within the tested temperature range. EPR was shown to detect microstructural transitions of LCs and to provide complementary data to other techniques. These data thus confirm the applicability of EPR as a complementary technique for better understanding of LC microstructural transitions that are expected to contribute greatly to studies oriented towards the drug release characteristics from such systems.

The influence of microemulsion structure on their skin irritation and phototoxicity potential.

The purpose of this study was to examine skin irritation and phototoxicity potentials of several microemulsions (ME), all comprising approximately the same percentage of surfactant mixture, but varying oil/water content and consequently inner structure being either droplet-like (o/w ME, o/w ME carbomer, w/o ME and w/o ME white wax) or lamellar (gel-like ME). Two different in vitro methods were used: MTT assay (performed either on reconstructed human epidermis (RHE) or NCTC 2544 cells) and pig ear test. Neither assay revealed the difference among ME with droplet-like structure. Then again, pig ear test and MTT assay performed on RHE indicated that gel-like ME is more irritant compared to other tested ME, whereas no difference among formulations were observed by MTT assay on NCTC 2544 cells. The reasonable explanation is destruction and consequently uniform structure of ME upon dilution that is inevitable for testing on cell cultures. The results of phototoxicity test again indicated the increased potential of gel-like ME to cause adverse effects on skin. It can be concluded that for ME consisting of the same amount of identical surfactants but having different structure the latter represent a crucial factor that determines their dermal toxicity.

Biocompatible microemulsions of a model NSAID for skin delivery: A decisive role of surfactants in skin penetration/irritation profiles and pharmacokinetic performance.

To elaborate the decisive role of surfactants in promotion of aceclofenac' skin absorption, potentially avoiding irritation, we developed non-ionic microemulsions varying natural or synthetic surfactants: sucrose esters (laurate or myristate) vs. polysorbate 80. A comprehensive physicochemical characterization indicated no significant influence of the solubilized nonsteroidal anti-inflammatory drug on the bicontinuous structure of blank formulations. To evaluate skin tolerability of isopropyl alcohol, a sucrose ester-based microemulsion containing transcutol P as a cosurfactant was also developed. The measured skin parameters strongly depended on the (co)surfactant type, showing higher compatibility of the microemulsions containing sucrose ester and isopropyl alcohol. In vitro release results, in vivo tape stripping and pharmacokinetics in rats confirmed superiority of the sucrose ester- over polysorbate-based microemulsions (total amounts of aceclofenac penetrated 60.81±5.97 and 60.86±3.67 vs. 27.00±5.09µg/cm(2), and its maximum plasma concentrations 275.57±109.49 and 281.31±76.76 vs. 150.23±69.74ng/ml for sucrose laurate- and myristate- vs. polysorbate 80-based microemulsions, respectively). Hence, sugar-based excipients increased delivery of aceclofenac through stratum corneum by increasing its fluidity, showing overall more satisfying safety profiles. In conclusion, sucrose ester-based microemulsions proved to be promising carriers for dermal/transdermal aceclofenac delivery.

Tablets and minitablets prepared from spray-dried SMEDDS containing naproxen.

The purpose of this study was to compare different solidification techniques (i.e., adsorption technique, spray-drying process, high-shear granulation, fluid-bed granulation) for preparing solid SMEDDS powders by using solid carriers identified as appropriate and to produce a single (tablets) or multiunit (minitablets) solid dosage form based on prepared solid SMEDDS loaded with naproxen in a dissolved (6% w/w) or supersaturated (18% w/w) state. Among the solidification techniques and carriers tested, the powders produced using the spray-drying process and maltodextrin (MD) as a carrier exhibited the best self-microemulsifying properties, comparable with liquid SMEDDS. Furthermore, DoE (Design of Experiments) showed that pressure at the nozzle and pump speed (regulating feed flow rate) applied during spray drying had a major and significant influence on self-microemulsifying properties (mean droplet size and PDI) of the solid SMEDDS prepared. Furthermore, it was shown that compression of solid SMEDDS into (mini) tablets influences its self-microemulsifying properties in a negative direction. This resulted in lowering the dissolution profile of naproxen from tablets and minitablets in comparison with liquid and solid SMEDDS. However, all compressed SMEDDS formulations still had considerable influence on the dissolution profile and solubility enhancement of naproxen.

Characterization of naproxen-loaded solid SMEDDSs prepared by spray drying: the effect of the polysaccharide carrier and naproxen concentration.

The purpose of this study was to prepare solid SMEDDS (sSMEDDS) particles produced by spray-drying using maltodextrin (MD), hypromellose (HPMC), and a combination of the two as a solid carrier. Naproxen (NPX) as the model drug was dissolved (at 6% concentration) or partially suspended (at 18% concentration) in a liquid SMEDDS composed of Miglyol(®) 812, Peceol™, Gelucire(®) 44/14, and Solutol(®) HS 15. Among the sSMEDDSs tested, the MD-based sSMEDDSs (with a granular, smooth-surfaced, microspherical appearance) preserved the self-microemulsifying properties of liquid SMEDDSs and exhibited dissolution profiles similar to those of liquid SMEDDSs, irrespective of the concentration of NPX. In contrast, HPMC-based sSMEDDSs (irregular-shaped microparticles) exhibited slightly prolonged release times due to the polymeric nature of the carrier. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), and Raman mapping analysis confirmed molecularly dissolved NPX (at 6% of drug loading), whereas at 18% NPX loading drug is partially molecularly dissolved and partially in the crystalline state.

Development of a solid self-microemulsifying drug delivery system (SMEDDS) for solubility enhancement of naproxen.

CONTEXT: Comparative evaluation of liquid and solid self-microemulsifying drug delivery systems (SMEDDS) as promising approaches for solubility enhancement. OBJECTIVE: The aim of this work was to develop, characterize, and evaluate a solid SMEDDS prepared via spray-drying of a liquid SMEDDS based on Gelucire® 44/14 to improve the solubility and dissolution rate of naproxen. MATERIAL AND METHODS: Various oils and co-surfactants in combination with Gelucire® 44/14 were evaluated during excipient selection study, solubility testing, and construction of (pseudo)ternary diagrams. The selected system was further evaluated for naproxen solubility, self-microemulsification ability, and in vitro dissolution of naproxen. In addition, its transformation into a solid SMEDDS by spray-drying using maltodextrin as a solid carrier was performed. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to evaluate the physical characteristics of the solid SMEDDS obtained. RESULTS: The selected formulation of SMEDDS was comprised of Miglyol 812®, Peceol™, Gelucire® 44/14, and Solutol® HS 15. The liquid and solid SMEDDS formed a microemulsion after dilution with comparable average droplet size and exhibited uniform droplet size distribution. In the solid SMEDDS, liquid SMEDDS was adsorbed onto the surface of maltodextrin and formed smooth granular particles with the encapsulated drug predominantly in a dissolved state and partially in an amorphous state. Overall, incorporation of naproxen in SMEDDS, either liquid or solid, resulted in improved solubility and dissolution rate compared to pure naproxen. CONCLUSION: This study indicates that a liquid and solid SMEDDS is a strategy for solubility enhancement in the future development of orally delivered dosage forms.

Mini-tablets: a contemporary system for oral drug delivery in targeted patient groups.

INTRODUCTION: Mini-tablets represent a new trend in solid dosage form design, with the main goal of overcoming some therapeutic obstacles such as impaired swallowing and polypharmacy therapy, and also offering some therapeutic benefits such as dose flexibility and combined release patterns. Mini-tablets are a promising patient-friendly drug delivery system. AREAS COVERED: Mini-tablets are tablets with a diameter ≤ 3 mm produced on conventional tablet presses equipped with multiple tooling. Mini-tablet production is similar to the production of standard tablets but requires excellent powder flow due to the small dies, exact control of process parameters and special caution during tablet press assembly in order to avoid tool damage. Mini-tablets (coated or uncoated and single- or multiple-unit systems) are mainly developed as patient-friendly systems for pediatric and geriatric patients and also for personalized medicine because they offer improved swallowing and flexible dosing, combining various release kinetics, doses and active compounds in only one system. Mini-tablets may also be successfully used as multiple-unit modified release systems (extended release, delayed-colon release, pulsatile and bi-modal release and gastroretentive systems) providing improved drug bioavailability compared with single-unit systems. EXPERT OPINION: Mini-tablets used as single- or multiple-unit oral dosage forms have enormous potential as a patient-friendly drug delivery system for targeted populations, providing improved swallowing, flexible dosing and a combination of different release patterns and/or different active compounds (decreasing dosing frequency and/or polypharmacy therapy problems). In terms of complete expression of the benefits of mini-tablets over other oral dosage forms on the market, further investigation in formulation possibilities and development of suitable dosing devices is of essential importance.

A self-microemulsifying drug delivery system to overcome intestinal resveratrol toxicity and presystemic metabolism.

A mixed lipid-mixed surfactant self-microemulsifying drug delivery system (SMEDDS) was developed to exploit the health benefits of resveratrol, a Biopharmaceutical Classification System Class 2 natural polyphenol, subject to extensive intestinal presystemic metabolism. SMEDDS with a mixed lipid phase (castor oil/Capmul MCM 1:1) and a mixed surfactant phase (Kolliphor EL/Kolliphor RH 40 1:1) was developed and evaluated for its self-emulsifying properties and in vitro dispersion. The impact of SMEDDS on the permeability properties of resveratrol and its metabolite fluxes through the rat intestine and Caco-2 cells was monitored. The inhibitory effect of selected SMEDDS components on the efflux transporters multidrug resistance-associated protein and P-gp as well as cytotoxicity was assessed on Caco-2 cells. The formulation allowed for high resveratrol loading (122.5 mg/g SMEDDS), excellent self-emulsifying properties, and very rapid release. When formulated in SMEDDS, resveratrol metabolite efflux significantly declined. The formulation (SMEDDS without incorporated resveratrol) and its individual components did not compromise in vitro cell vitality and integrity. Mixed lipid-mixed surfactant SMEDDS is a prospective formulation to improve resveratrol biopharmaceutical, pharmacokinetic, and toxicological properties, leading the way to resveratrol use not only as a supplement but also as a pharmacological drug.