Enzymatic Synthesis of 2-(ß-Galactosyl)-ethyl Methacrylate by ß-Galactosidase from Pyrococcus woesei and Application for Glycopolymer Synthesis and Lectin Studies.

Glycosidases have long been used for the synthesis of glycosides by transglycosylation reactions. Especially glycosidases from hyperthermophilic bacteria are useful for reactions under extreme reaction conditions, e.g., in the presence of organic solvents. We herein report the facile enzymatic synthesis and purification of 2-(ß-galactosyl)-ethyl methacrylate (Gal-EMA) with the recombinant hyperthermostable glycosidase from Pyrococcus woesei in high yields. Optimized reaction conditions resulted in gram-scale synthesis of the galactosylated monomer with 88% transglycosylation yield. The product Gal-EMA was characterized by high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS), nuclear magnetic resonance (NMR) spectroscopy, and infrared (IR) spectroscopy. Gal-EMA was utilized to synthesize sugar-functionalized acrylate polymers with defined amounts of incorporated galactose (0-100%). Analysis of the binding affinity of the lectin RCA120 from Ricinus communis to the glycopolymers using an enzyme-linked lectin assay (ELLA) revealed KD values between 0.24 and 6.2 nM, depending on the amount of incorporated Gal-EMA. The potential of Gal-EMA for the synthesis of acrylate-functionalized glycan oligomers was demonstrated by sequential elongation of the terminal galactose by two glycosyltransferases, resulting in the terminal glycan N-acetyllactosamine (LacNAc) epitope. In conclusion, the enzymatic synthesis of Gal-EMA opens new routes to a series of novel monomeric building blocks for the synthesis of glycan-functionalized polyacrylates.

Amphiphilic PVCL/TBCHA microgels: From synthesis to characterization in a highly selective solvent.

Thermoresponsive copolymer microgels based on the biocompatible monomer N-vinylcaprolactam (VCL) and the hydrophobic comonomer 4-tert-butylcyclohexylacrylate (TBCHA) with highly tunable comonomers ratio were for the first time synthesized by miniemulsion polymerization. Their physical properties in aqueous solution and at the solid interface were characterized using dynamic light scattering (DLS), atomic force microscopy (AFM) and dissipative particle dynamics (DPD) simulations. The results show a significant decrease of the swelling rate of the obtained microgels with an increase of the amount of the hydrophobic comonomer. In the case when the fraction of TBCHA is equal or higher than the fraction of VCL, the microgels become almost insensitive to the temperature changes, and the amount of water inside the microgels appeared to be diminishingly small. In the opposite case, if the VCL fraction is major, the copolymer microgels preserve their softness and deformability while being adsorbed onto a solid surface. At the same time, all samples have shown a good colloidal stability and a low polydispersity in size. Thus, the presented polymerization technique is applicable for the fabrication of microgels using hydrophobic monomers, which are not accessible by conventional precipitation polymerization. We demonstrate that the mechanical properties and the temperature-responsiveness of the copolymer microgels can be precisely adjusted by the content of the hydrophobic comonomer.

Selective Functionalization of Microgels with Enzymes by Sortagging.

Enzyme immobilization has been widely used to improve the stability and recyclability of enzymes in industrial processes. In this work, a sortase-mediated and therefore selective covalent immobilization strategy (sortagging) for enzymes on microgels (GelZyms) was investigated. Aqueous microgels were synthesized from poly(N-vinylcaprolactam)/glycidyl methacrylate (PVCL/GMA) and tagged with the sortase A recognition peptide sequence (LPETG) or its nucleophilic counterpart-tag (GGG). General applicability and selective immobilization were confirmed by subsequent sortagging of five different enzymes (Bacillus subtilis lipase A (BSLA), Yersinia mollaretii phytase (Ym-phytase), Escherichia coli copper efflux oxidase (CueO laccase), cellulase A2, and Bacillus megaterium monooxygenase P450 BM3). The latter was performed directly from the cell lysate to ensure cost-effective immobilization. All five immobilized enzymes were catalytically active and could be recycled (e.g., laccase CueO and monooxygenase P450 BM3 F87A; >55% residual activity after six cycles). Application potential was demonstrated by using CueO decorated microgels for bleaching of the synthetic dye indigo carmine.

Influence of size, crosslinking degree and surface structure of poly(N-vinylcaprolactam)-based microgels on their penetration into multicellular tumor spheroids.

Current nanomedicine suffers from a big challenge due to the fact that most of the nanocarrier systems lack the desired tumor penetration depth, thereby limiting their clinical translation. Unlike the nanomaterials with a similar size or shape, microgels display excellent softness, fluidity and deformability, as well as stimuli-responsiveness in the tumor microenvironment. Herein, we report the synthesis of temperature-responsive poly(N-vinylcaprolactam)/oligo (ethylene glycol) acrylate/glycidyl methacrylate (PVCL/OEGA/GMA) microgels with different hydrodynamic radii (100-500 nm), crosslinking densities, 2-methoxyethyl acrylate (MEA) contents and OEGA chain lengths using a precipitation polymerization method and the investigation of the microgels in terms of their tumor penetration capability using a multicellular tumor spheroid (MCTS) model. The prepared microgels were well characterized with different techniques. We show that regardless of the size, crosslinking density, MEA content and OEGA chain length, all microgels display the desired cytocompatibility in the given concentration range. In vitro cellular uptake data reveal that similar to 2-dimensional (2-D) adherent cells, microgels with a smaller size display more enhanced cellular uptake than those having a larger size in the 3-D MCTS model. Likewise, 3-D MCTS penetration results indicate that the PVCL/OEGA/GMA microgels with the smallest radius of 100 nm exhibit the deepest penetration length. We then selected the microgels with a radius of 200 nm but with different physicochemical parameters to investigate their cellular uptake and tumor penetration behavior. Our data show that microgels with varying crosslinking densities, MEA contents and OEGA chain lengths do not have any appreciable changes in terms of their cellular uptake and penetration in the 3-D MCTS model. Our study provides new insights for the design of different microgel-based systems for further cancer theranostic applications.

Amylose-Coated Biohybrid Microgels by Phosphorylase-Catalyzed Grafting-From Polymerization.

Herein, the synthesis of amylose-coated, temperature-responsive poly(N-vinylcaprolactam) (VCL)-based copolymer microgels by enzyme-catalyzed grafting-from polymerization with phosphorylase b from rabbit muscle is reported. The phosphorylase is able to recognize the oligosaccharide maltoheptaose as primer and attach glucose units from the monomer glucose-1-phosphate to it, thereby forming amylose chains while releasing inorganic phosphate. Therefore, to enable the phosphorylase-catalyzed grafting-from polymerization of glucose-1-phosphate from the PVCL-based microgels, the maltoheptaose primer is covalently attached to the microgel in the first synthesis step. This is realized by adding N-(2-aminoethyl)methacrylamide (AEMAA) as a comonomer to the PVCL microgel to integrate primary amino groups and subsequent coupling of maltoheptaonolactone. Both the PVCL/AEMAA microgel as well as the obtained microgel-maltoheptaose construct are characterized in detail by dynamic light scattering, electrophoretic mobility measurements, IR spectroscopy, and atomic force microscopy. From the microgel-maltoheptaose construct, the grafting-from polymerization of glucose-1-phosphate is performed by the addition of phosphorylase b. Atomic force microscopy images clearly demonstrate the formation of an amylose shell around the microgels. The developed amylose-coated microgels open up promising application possibilities, for example, as colloidal scavengers, since amylose helices can serve as host molecules for inclusion of hydrophobic guest molecules.

Sortase-Mediated Surface Functionalization of Stimuli-Responsive Microgels.

In this work we explored an enzyme-mediated method for selective and efficient decoration of aqueous microgels with biomolecules. Poly(N-vinylcaprolactam) (VCL) microgels with varied amounts of glycidyl methacrylate (GMA) as comonomer incorporated in the microgel shell were synthesized and characterized in regard to their size, swelling degree, and temperature-responsiveness in aqueous solutions. The surface of the PVCL/GMA microgel containing 5 mol % glycidyl methyacrylate was modified by grafting of a specific recognition peptide sequence (LPETG) for Sortase A from Staphylococcus aureus (Sa-SrtAΔ59). Sortase-mediated conjugation of the enhanced Green Fluorescent Protein (eGFP) carrying a N-terminal triglycine tag to LPETG-modified microgels was successfully performed. Conjugation of eGFP to the microgel surface was qualitatively proven by confocal microscopy and by fluorescence intensity measurements. The developed protocol enables a precise control of the amount of eGFP grafted to the microgel surface as evidenced by the linear increase of fluorescence intensity of modified microgel samples. The kinetic of the sortase-mediated coupling reaction was determined by time-dependent fluorescence intensity measurements. In summary, sortase-mediated coupling reactions are a simple and powerful technique for targeted surface functionalization of stimuli-responsive microgels with biomolecules.

Stimuli-responsive poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) core-shell microgels: facile synthesis, modulation of surface properties and controlled internalisation into cells.

Herein we report the synthesis of biocompatible stimuli-responsive core-shell microgels consisting of a poly(N-vinylcaprolactam) (PVCL) core and a poly(2-methoxyethyl acrylate) (PMEA) corona via one-step surfactant-free precipitation copolymerization. The copolymerization process was investigated by reaction calorimetry, microgel growth was monitored by in situ dynamic light scattering and the chemical structure of core-shell microgels was characterized by Raman spectroscopy. It was possible to incorporate up to 32 mol% MEA into the PVCL/MEA microgels without loss of colloidal stability and broadening of the size distribution. The core-shell morphology of microgels was confirmed by transverse magnetization relaxation 1H-NMR, dynamic light scattering (DLS), atomic force microscopy (AFM) and viscosimetry. By means of the NMR data, calorimetry and viscosity measurements it could be shown that MEA is mainly located in the microgel shell. This leads to hindered temperature-induced swelling and collapsing of the PVCL-core, as demonstrated by DLS measurements, due to the fact that the PMEA-shell exhibits a very low LCST around 5 °C. These results could also be confirmed by AFM: an increasing MEA-content leads to the formation of dense and compact core-shell microgels and results in a loss of their softness and deformability. Due to the presence of the PMEA-shell these microgels can be endocytosed much faster by HeLa cells maintaining their viability and can be suitable candidates for the design of drug carriers or imaging/diagnostic systems.