Systematic evaluation of the impact of defacing on quality and volumetric assessments on T1-weighted MR-images.

BACKGROUND AND PURPOSE: Facial features can be potentially reconstructed from structural magnetic resonance images, thereby compromising the confidentiality of study participants. Defacing methods can be applied to MRI images to ensure privacy of study participants. These methods remove facial features, thereby rendering the image unidentifiable. It is commonly assumed that defacing would not have any impact on quantitative assessments of the brain. In this study, we have assessed the impact of different defacing methods on quality and volumetric estimates. MATERIALS AND METHODS: We performed SPM-, Freesurfer-, pydeface, and FSL-based defacing on 30 T1-weighted images. We statistically compared the change in quality measurements (from MRIQC) and volumes (from SPM, CAT, and Freesurfer) between non-defaced and defaced images. We also calculated the Dice coefficient of each tissue class between non-defaced and defaced images. RESULTS: Almost all quality measurements and tissue volumes changed after defacing, irrespective of the method used. All tissue volumes decreased post-defacing for CAT, but no such consistent trend was seen for SPM and Freesurfer. Dice coefficients indicated that segmentations are relatively robust; however, partial volumes might be affected leading to changed volumetric estimates. CONCLUSION: In this study, we demonstrated that volumes and quality measurements get affected differently by defacing methods. It is likely that this will have a significant impact on the reproducibility of experiments. We provide suggestions on ways to minimize the impact of defacing on outcome measurements. Our results warrant the need for robust handling of defaced images at different steps of image processing.

Construction of population-specific Indian MRI brain template: Morphometric comparison with Chinese and Caucasian templates.

OBJECTIVE: Spatial normalization of brain MR images is highly dependent on the choice of target brain template. Morphological differences caused by factors like genetic and environmental exposures, generates a necessity to construct population specific brain templates. Brain image analysis performed using brain templates from Caucasian population may not be appropriate for non-Caucasian population. In this study, our objective was to construct an Indian brain template from a large population (N = 157 subjects) and compare the morphometric parameters of this template with that of Chinese-56 and MNI-152 templates. In addition, using an independent MRI data of 15 Indian subjects, we also evaluated the potential registration accuracy differences using these three templates. METHODS: Indian brain template was constructed using iterative routines as per established procedures. We compared our Indian template with standard MNI-152 template and Chinese template by measuring global brain features. We also examined accuracy of registration by aligning 15 new Indian brains to Indian, Chinese and MNI templates. Furthermore, we supported our measurement protocol with inter-rater and intra-rater reliability analysis. RESULTS: Our results showed that there were significant differences in global brain features of Indian template in comparison with Chinese and MNI brain templates. The results of registration accuracy analysis revealed that fewer deformations are required when Indian brains are registered to Indian template as compared to Chinese and MNI templates. CONCLUSION: This study concludes that population specific Indian template is likely to be more appropriate for structural and functional image analysis of Indian population.

Effect of Different Firing Temperatures on Structural Changes in Porcelain.

PURPOSE: To study the structural changes occurring in the dental porcelain mass fired at various firing temperatures using scanning electron microscopy (SEM) and X-ray diffraction (XRD) spectroscopy. Also, additional tests, namely compressive strength, abrasion resistance analysis, and the amount of oxides released, were conducted at different firing temperatures. MATERIALS AND METHODS: Six groups (40 specimens in each group) of porcelain mass were prepared. The dimensions and weight of all the specimens were kept constant. The specimens were then heat treated at different firing temperatures (660°C, 760°C, 860°C, 900°C, 960°C, 990°C). Half of the specimens of each group were subjected to a compressive strength test on a universal testing machine and then finely ground using an electrochemical grinder to prepare for XRD analysis. The other half of the specimens was weighed to analyze the amount of oxides released after each firing cycle. Following this, the specimens underwent an abrasion resistance test on a Nanovea Tribometer. The unaltered surface was scanned using SEM. The data (numerical and graphical) for all the tests were recorded and analyzed using one-way ANOVA and post hoc Tukey test. RESULTS: The specimens fired at 900°C exhibited superior compressive strength and abrasion resistance. The quantity of oxides released by the specimens fired at 900°C was the least compared to specimens heat treated at the other firing temperatures. XRD analysis proved that the oxide released by the porcelain mass was calcium aluminum chromium oxide. Also, the fewer peaks obtained in the XRD graphs of specimens fired at 900°C signified lesser porosities in the porcelain specimens. SEM analysis depicted a homogeneous mass of porcelain at 900°C. CONCLUSION: All the above findings validate the objective of studying the physical and internal structural changes of dental porcelain when subjected to an increasing firing temperature gradient. The specimens fired at 900°C exhibited superior strength and abrasion resistance. SEM analysis depicted a homogeneous mass of dental porcelain, implying that firing was complete at 900°C.

Assessment of oral health-related quality of life in 9-15 year old children with visual impairment in Uttarakhand, India.

BACKGROUND: To assess the prevalence of dental diseases among 9-15-year-old visually impaired children and find out its impact on their daily activities using the Child-Oral Impact on Daily Performance (C-OIDP) questionnaire in districts of Uttarakhand, India. MATERIALS AND METHODS: A total of 423 visually impaired institutionalized children between the age group of 9-15 years were included in the study. Stratified random sampling technique was used to obtain the study population. Dental caries was recorded using dmft for primary dentition and DMFT for permanent dentition, traumatic dental injuries were assessed using traumatic dental injury index, and dentofacial anomalies were recorded using Angle's classification of malocclusion. The Hindi braille version of C-OIDP questionnaire was used to gather information regarding oral health-related quality of life (OHRQoL). RESULTS: There was a high dental caries prevalence of 57.7% in visually impaired children. The prevalence of traumatic dental injuries was 50.6%. Crowding (61.5%) was the most commonly seen dentofacial anomaly and the most commonly perceived oral health problem was toothache. There was less favorable OHRQoL in males as compared to females. CONCLUSION: There was a high prevalence of dental diseases in this group and higher C-OIDP scores suggestive of unfavorable OHRQoL.

The doppelganger tooth: A diagnostic conundrum!

Abnormalities in tooth morphology and number are not uncommon. However, an exact clone of a normal tooth is a recondite clinical finding. Presence of supplementary teeth is mostly noticed in maxillary anterior, molar or premolar region, followed by mandibular premolar region in descending order of its site of occurrence. Supplemental tooth in mandibular anterior has a low prevalence of 0.01%. This paper reports one such rare case of nonsyndromic incisive jumeaux in mandibular anterior region during mixed dentition period.

A study of root canal morphology of human primary incisors and molars using cone beam computerized tomography: an in vitro study.

BACKGROUND: Variations in morphology of root canals in primary teeth usually leads to complications during and after endodontic therapy. To improve the success in endodontics, a thorough knowledge of the root canal morphology is essential. AIM: The aim of this study was to assess the variation in number and morphology of the root canals of primary incisors and molars and to study the applicability of cone beam computerized tomography (CBCT) in assessing the same. SETTINGS AND DESIGN: A total of 60 primary molars and incisors with full root length were collected and various parameters such as the number of roots, number of canals, diameter of root canal at cementoenamel junction and middle-third, length and angulations of roots of primary molars and incisors were studied using CBCT. STATISTICAL ANALYSIS USED: The observations were put to descriptive statistics to find out the frequency, mean, standard deviation and range for all four subgroups. Further, unpaired t-test was used to compare these parameters between subgroups and analysis of variance test was implemented to evaluate the parameters within the subgroups. RESULTS AND CONCLUSION: The CBCT showed the presence of bifurcation of root canal at middle third in 13% of mandibular incisors while 20% of mandibular molars had two canals in distal root. The diameter of distobuccal root canal of maxillary molars and mesiolingual canal of mandibular molars was found to be minimum. CBCT is a relatively new and effective technology, which provides an auxiliary imaging modality to supplement conventional radiography for assessing the variation in root canal morphology of primary teeth.