RESUMO
The influence of ultrasound irradiation on the algal biomass productivity as well as its oil content and fatty acids profile, grown in a modified Zarrouk medium, i.e., deproteinized whey waste solution, was investigated. The algal samples (Nannochloris sp. 424-1 microalgae) were grown for 7 days in a thermostated incubator at 28 °C, shaken under continuous light. During this period, the algal biomass was subjected to induced stress by ultrasonic irradiation at different powers and sonication time. The obtained results demonstrate that ultrasound stressing of algae biomass has a positive effect on both the quantity of biomass and the oil obtained, also causing a shift in fatty acid composition by increasing the proportion of C16 and C18 polyunsaturated fatty acids. A low dosage level of exposure to the ultrasound led to algal biomass increase as well as lipid accumulation. For both types of irradiation modes which were investigated, daily and only initial irradiation, the beneficial effect of the ultrasound decreases as the exposure time increases and the excessive sonication becomes detrimental to microalgae growth.
RESUMO
This work is focused on the study of the esterification parameters for the ultrasound assisted synthesis of isoamyl acetate catalyzed by lipase Lipozyme 435 in a continuous loop reactor. Investigating the influence of different parameters shows that a higher concentration of ester (462 mg/g mixture) can be obtained at a temperature of 50 °C, flow rate 0.16 mL/min. The best ultrasonication conditions are: sonication applied continuously for a short time (20 min), ultrasound power 32 mW and amplitude 20%. The enzyme can be successfully reused tree times without loss of enzyme activity. Reaction kinetics for isoamyl acetate ultrasound assisted production showed that satisfactory reaction concentration (close to the equilibrium concentrations) could be reached in short reaction times (2 h). Ultrasound assisted enzymatic esterification is consequently a cleaner and a faster process.
RESUMO
Sea buckthorn (Hippophae Rhamnoides L.) is an important source of bioactive compounds such as: antioxidants, vitamins, fatty acids, amino acids, and minerals. Sea buckthorn leaves extracts have been proved to have anti-microbial, antioxidant, anti-inflammatory, and anti-viral properties. In this paper, the extraction of polyphenols from sea buckthorn leaves using a semi-continuous small-scale reactor is described. The extraction conditions must not affect the composition and structure of polyphenols. For this reason, the influence of different parameters (residence time, solvent flow rate, stirring rate, reactor type, and solvent pre-heating) on the extraction process were studied. The polyphenolic extracts were analyzed in order to determine the total phenolic content (TPC), the antioxidant capacity and the concentration of the main phenolic compounds. The TPC increases with the stirring rate. Pre-heating the solvent leads to a better yield and reduced residence time. The antioxidant capacity is in concordance with the TPC results. HPLC analysis confirms that the semi-continuous microwave assisted extraction (MAE) does not affect the composition of the extracts. The energy consumption was significantly lower for MAE compared with conventional extraction (CE).
