Thermal conversion of irradiated LLDPE waste into sustainable sponge-like compounds: a novel approach for efficient trace-level oil-water removal.

The newest method for recycling waste linear low-density polyethylene (LLDPE) is the thermo-catalytic degradation technique known as catalytic pyrolysis. Typically, it is limited by 500-800 °C high temperatures. Catalytic pyrolysis releases toxins and forms harmful carbonized char. The current study is based on exposing wasted LLDPE to different gamma irradiation doses and then pyrolysis in castor oil (150-300 °C). The output product of Ir-(rLLDPE) is turned into another compound with a new structural architecture (sponge-like). SEM analysis confirms conversion, showing sponge-like spicules and layers. Ir-(rLLDPE) is sponge-like with a soft, malleable, absorbent texture. The DSC demonstrates altered thermal properties, with a melting point at 121 °C splitting into two peaks (endothermic at 117 °C and exothermic at 160 °C). The exothermic peaks signify the curing process of the sponge-like material. Ir-(rLLDPE) is assessed as an adsorbent for aqueous oils and solvents. The study examines irradiation doses, pyrolysis temperature, and time on adsorbent capacity. The oil removal obeys the Langmuir isotherm with monolayer adsorption, with a maximum adsorption capacity of 24.75 g/g of waste oil and 43 g/g of 1,1,2,2-tetrachloroethane. Squashing maintains adsorption after 20 reuses. Data shows sponges effectively clean marine oil spills and solvents.

Gamma irradiation-enhanced performance of waste LLDPE thermally transformed into advanced sponge-like material for oil decontamination.

In this study, the development of advanced materials for the removal of oil-water pollution was explored, with a focus on environmental protection. The primary novelty of this research involved the conversion of waste Linear low-density polyethylene (LLDPE) into a sponge-like material denoted as sLLDPE. The process of converting involved thermal treatment in castor oil, resulting in the creation of a porous structure within the material. This sLLDPE material exhibited remarkable oil adsorbent properties and demonstrated enhanced performance in the removal of various organic contaminants from both aqueous and oil-based systems. Furthermore, gamma irradiation-induced crosslinking reactions were implemented within a dose range of 0 up to 90 kGy to further improve its oil removal capabilities. Comparing samples subjected to a radiation dose of 50 kGy with those receiving no irradiation (0 kGy), it was observed that the maximum adsorption capacities for various oils, including crude oil, gasoline oil, motor oil, pump oil, and waste oil, increased significantly. Specifically, the adsorption capacities increased by approximately 216.2%, 235.3%, 24.1%, 111.5%, and 18.6% for the respective oils. It rapidly separated oil-water mixtures with ~ 100% efficiency in a column system and maintained performance over 20 reuse cycles. The converted sLLDPE sponge exhibited excellent organics removal across solvents. The findings of this study not only shed light on the impact of irradiation on polymeric materials but also contribute to our understanding of their potential applications in environmental cleanup processes.

Radiation cross-linked ultra-absorbent hydrogel to rationalize irrigation water and fertilizer for maize planting in drought conditions.

The study addresses the potential negative impacts of climate change on water resources, specifically irrigation water for crops. The radiation technique produces the biomaterial hydrogel as a soil conditioner by polymerizing hydroxy ethyl cellulose/acrylamide (HEC/AAm) at various irradiation doses and copolymer concentrations. A maximum swelling of 23.4 g/g is attained by (HEC/PAAm) hydrogel at 1/7.5 ratio, prepared by 10 kGy gamma irradiation. The study introduces a new class of ultra-absorbent hydrogel (UAH) to address the low swelling limitation for soil conditioner applications. The alkaline hydrolysis treatments with NaOH, LiOH, and KOH enhance the water absorbency of (HEC/PAAm) hydrogel, with the highest capacity of 1220 g/g achieved by the KOH treatment, surpassing NaOH (622 g/g) and LiOH (540 g/g). The cumulative release of fertilizers from the UAH sample shows a slow and controlled release behavior. Urea takes 22 days to reach 100 % release. The UAH demonstrates water retention for 28 days, improving the growth of Zea mays L. at drought stress levels of 0 %, 25 %, 50 %, and 100 %, revealing an increase in shoot length by 16 %, 19 %, 24 %, and 20 %, respectively. Also, UAH increased the contents of chlorophyll a, b, a + b, and carotenoid on maize plant leaves compared to the control sample.