Carcinoma of the uterine cervix: a 3D - CT analysis of dose to the internal, external and common iliac nodes in tandem and ovoid applications.

PURPOSE: To describe external, internal and common iliac dose rates estimated with 3D-computed tomography (CT) based dose calculations in tandem and ovoid brachytherapy. MATERIALS AND METHODS: Thirty patients with carcinoma of the uterine cervix received low dose rate brachytherapy with a CT-compatible Fletcher-Suit-Deldos device. A total of 36 implants were performed with axial CT images used to identify internal iliac, external iliac, and common iliac vessels. Dose rates on the surfaces of these vessels were calculated for the purpose of estimating the dose to their associated lymph nodes. RESULTS: In 22 out of 72 comparisons, point B overestimated the maximum dose with the external iliac nodes. In 21 out of 72 comparisons, point B overestimated the maximum dose with the internal iliac nodes. In all cases, Point B overestimated the minimum dose to the internal and external iliac nodal chains. CONCLUSION: It was found that Point B dose is similar to the maximum common iliac nodal dose. Patient to patient variability, of Point B dose, warrants further study of dose distributions to the nodal chains. The minimum dose to the external iliac nodal chain at the bifurcation of the nodal chains may provide a useful measure of 'pelvic side wall dose' and deserves further study to see if it can be correlated with pelvic side wall control and complications.

Computed axial tomography tandem and ovoids (CATTO) dosimetry: three-dimensional assessment of bladder and rectal doses.

The purpose of this work is to compare bladder and rectal dose rates in brachytherapy for carcinoma of the cervix using two different dosimetry systems: traditional orthogonal radiograph-based dosimetry vs. computed axial tomography tandem and ovoids (CATTO) dosimetry. Twenty-two patients with carcinoma of the uterine cervix received the brachytherapy component of their radiotherapy with a computed-tomography compatible Fletcher-Suit-Delclos device. A total of 27 implants were performed. The average maximum bladder dose (Bmax) for the implants was 85.8 cGy/hr using the CATTO system as compared to 42.6 cGy/hr using traditional dosimetry, (P < 0.005). The average maximum rectal dose (R.) using the CATTO system was 59.2 cGy/hr as compared with 46.3 cGy/hr using the traditional system (P < 0.05). The traditional methods for choosing points to determine bladder and rectal dose rates underestimated the true Bmax in all cases and the R. in most. Based on the complication rates published in the literature, it is likely that the maximum tolerance dose of both the rectum and bladder, but especially the bladder, is higher than previously thought.