Halide Perovskite Nanocrystals for Next-Generation Optoelectronics.

Colloidal perovskite nanocrystals (PNCs) combine the outstanding optoelectronic properties of bulk perovskites with strong quantum confinement effects at the nanoscale. Their facile and low-cost synthesis, together with superior photoluminescence quantum yields and exceptional optical versatility, make PNCs promising candidates for next-generation optoelectronics. However, this field is still in its early infancy and not yet ready for commercialization due to several open challenges to be addressed, such as toxicity and stability. Here, the key synthesis strategies and the tunable optical properties of PNCs are discussed. The photophysical underpinnings of PNCs, in correlation with recent developments of PNC-based optoelectronic devices, are especially highlighted. The final goal is to outline a theoretical scaffold for the design of high-performance devices that can at the same time address the commercialization challenges of PNC-based technology.

Highly Efficient and Ultrasensitive Large-Area Flexible Photodetector Based on Perovskite Nanowires.

Hybrid organic-inorganic perovskites have shown exceptional semiconducting properties and microstructural versatility for inexpensive, solution-processable photovoltaic and optoelectronic devices. In this work, an all-solution-based technique in ambient environment for highly sensitive and high-speed flexible photodetectors using high crystal quality perovskite nanowires grown on Kapton substrate is presented. At 10 V, the optimized photodetector exhibits a responsivity as high as 0.62 A W-1 , a maximum specific detectivity of 7.3 × 1012 cm Hz1/2 W-1 , and a rise time of 227.2 µs. It also shows remarkable photocurrent stability even beyond 5000 bending cycles. Moreover, a deposition of poly(methyl methacrylate) (PMMA) as a protective layer on the perovskite yields significantly better stability under ambient air operation: the PMMA-protected devices are stable for over 30 days. This work demonstrates a cost-effective fabrication technique for high-performance flexible photodetectors and opens opportunities for research advancements in broadband and large-scale flexible perovskite-based optoelectronic devices.

Hysteresis-Free 1D Network Mixed Halide-Perovskite Semitransparent Solar Cells.

The morphology of hybrid organic-inorganic perovskite films is known to strongly affect the performance of perovskite-based solar cells. CH3 NH3 PbI3-x Clx (MAPbI3-x Clx ) films have been previously fabricated with 100% surface coverage in glove boxes. In ambient air, fabrication generally relies on solvent engineering to obtain compact films. In contrast, this work explores the potential of altering the perovskites microstructure for solar cell engineering. This work starts with CH3 NH3 PbI3-x Clx , films with grain morphology carefully controlled by varying the deposition speed during the spin-coating process to fabricate efficient and partially transparent solar cells. Devices produced with a CH3 NH3 PbI3-x Clx film and a compact thick top gold electrode reach a maximum efficiency of 10.2% but display a large photocurrent hysteresis. As it is demonstrated, the introduction of different concentrations of bromide in the precursor solution addresses the hysteresis issues and turns the film morphology into a partially transparent interconnected network of 1D microstructures. This approach leads to semitransparent solar cells with negligible hysteresis and efficiencies up to 7.2%, while allowing average transmission of 17% across the visible spectrum. This work demonstrates that the optimization of the perovskites composition can mitigate the hysteresis effects commonly attributed to the charge trapping within the perovskite film.

Solvent-Antisolvent Ambient Processed Large Grain Size Perovskite Thin Films for High-Performance Solar Cells.

In recent years, hybrid organic-inorganic halide perovskites have been widely studied for the low-cost fabrication of a wide range of optoelectronic devices, including impressive perovskite-based solar cells. Amongst the key factors influencing the performance of these devices, recent efforts have focused on tailoring the granularity and microstructure of the perovskite films. Albeit, a cost-effective technique allowing to carefully control their microstructure in ambient environmental conditions has not been realized. We report on a solvent-antisolvent ambient processed CH3NH3PbI3-xClx based thin films using a simple and robust solvent engineering technique to achieve large grains (>5 µm) having excellent crystalline quality and surface coverage with very low pinhole density. Using optimized treatment (75% chlorobenzene and 25% ethanol), we achieve highly-compact perovskite films with 99.97% surface coverage to produce solar cells with power conversion efficiencies (PCEs) up-to 14.0%. In these planar solar cells, we find that the density and size of the pinholes are the dominant factors that affect their overall performances. This work provides a promising solvent treatment technique in ambient conditions and paves the way for further optimization of large area thin films and high performance perovskite solar cells.

Highly Sensitive Switchable Heterojunction Photodiode Based on Epitaxial Bi2FeCrO6 Multiferroic Thin Films.

Perovskite multiferroic oxides are promising materials for the realization of sensitive and switchable photodiodes because of their favorable band gap (<3.0 eV), high absorption coefficient, and tunable internal ferroelectric (FE) polarization. A high-speed switchable photodiode based on multiferroic Bi2FeCrO6 (BFCO)/SrRuO3 (SRO)-layered heterojunction was fabricated by pulsed laser deposition. The heterojunction photodiode exhibits a large ideality factor ( n = ∼5.0) and a response time as fast as 68 ms, thanks to the effective charge carrier transport and collection at the BFCO/SRO interface. The diode can switch direction when the electric polarization is reversed by an external voltage pulse. The time-resolved photoluminescence decay of the device measured at ∼500 nm demonstrates an ultrafast charge transfer (lifetime = ∼6.4 ns) in BFCO/SRO heteroepitaxial structures. The estimated responsivity value at 500 nm and zero bias is 0.38 mA W-1, which is so far the highest reported for any FE thin film photodiode. Our work highlights the huge potential for using multiferroic oxides to fabricate highly sensitive and switchable photodiodes.

Rapid fabrication technique for interpenetrated ZnO nanotetrapod networks for fast UV sensors.

Two flame-based synthesis methods are presented for fabricating ZnO-nanostructure-based UV photodetectors: burner flame transport synthesis (B-FTS)and crucible flame transport synthesis (C-FTS). B-FTS allows rapid growth of ZnO nanotetrapods and in situ bridging of them into electrical contacts. The photo detector made from interconnected ZnO nanotetrapod networks exhibits fast response/recovery times and a high current ratio under UV illumination.

Solvent free fabrication of micro and nanostructured drug coatings by thermal evaporation for controlled release and increased effects.

Nanostructuring of drug delivery systems offers many promising applications like precise control of dissolution and release kinetics, enhanced activities, flexibility in terms of surface coatings, integration into implants, designing the appropriate scaffolds or even integrating into microelectronic chips etc. for different desired applications. In general such kind of structuring is difficult due to unintentional mixing of chemical solvents used during drug formulations. We demonstrate here the successful solvent-free fabrication of micro-nanostructured pharmaceutical molecules by simple thermal evaporation (TE). The evaporation of drug molecules and their emission to a specific surface under vacuum led to controlled assembling of the molecules from vapour phase to solid phase. The most important aspects of thermal evaporation technique are: solvent-free, precise control of size, possibility of fabricating multilayer/hybrid, and free choice of substrates. This could be shown for twenty eight pharmaceutical substances of different chemical structures which were evaporated on surfaces of titanium and glass discs. Structural investigations of different TE fabricated drugs were performed by atomic force microscopy, scanning electron microscopy and Raman spectroscopy which revealed that these drug substances preserve their structurality after evaporation. Titanium discs coated with antimicrobial substances by thermal evaporation were subjected to tests for antibacterial or antifungal activities, respectively. A significant increase in their antimicrobial activity was observed in zones of inhibition tests compared to controls of the diluted substances on the discs made of paper for filtration. With thermal evaporation, we have successfully synthesized solvent-free nanostructured drug delivery systems in form of multilayer structures and in hybrid drug complexes respectively. Analyses of these substances consolidated that thermal evaporation opens up the possibility to convert dissoluble drug substances into the active forms by their transfer onto a specific surface without the need of their prior dissolution.