Contrasting a series of bidentate amido phosphine oxide, sulfide, or selenide ligands and complexes of dimethyl aluminum and indium.

A series of EP(V)-imine phosphine-imine ligands (Dipp-NC(CH3)-(CH2)-PE(Ph2)) (Dipp = 2,6-diisopropylphenyl, E = O, S, Se) and corresponding dimethyl aluminum and indium complexes were prepared and characterized using multi-nuclear NMR spectroscopy and SC-XRD. Solution-state 1H and 31P NMR spectroscopy indicate a mixture of isomers in solution (C6D6, CDCl3, and CD3CN). Solid state structures of both the imine and (E)-enamine isomers of the oxygen-based ligand have been observed. These three ligands (L) were then deprotonated with M(CH3)3 (M = Al or In), with methane loss forming a 6-membered ring via bidentate chelation ((κ2-L)M(CH3)2). The indium/oxide complex also crystallized as a 12-membered ring.

Rigid PN cages as 3-dimensional building blocks for crystalline or amorphous networked materials.

Three-dimensional covalent connectors are valuable synthons for accessing crystalline or amorphous networks. Currently, fused polycyclic alkanes are employed as connectors in this context. We debut phosphorus-nitrogen (PN) cages as new 3-dimensional (3-D) inorganic connectors that yield crystalline and amorphous networks, including examples with gas porosity. We show that the high tunability of PN cages accelerates network diversification and the presence of a responsive 31P NMR spectroscopic handle provides structural insight. Collectively, this work unlocks a new and convenient 3-D synthon for reticular chemistry.

Correction: Electrochemical and X-ray structural evidence of multiple molybdenum precursor candidates from a reported non-aqueous electrodeposition of molybdenum disulfide.

[This corrects the article DOI: 10.1039/D3RA04605B.].

Electrochemical and X-ray structural evidence of multiple molybdenum precursor candidates from a reported non-aqueous electrodeposition of molybdenum disulfide.

A published report of electrodeposited molybdenum(iv) disulfide microflowers at 100 °C in the ionic liquid N-methyl-N-propylpiperidinium bis(trifluoromethane)sulfonimide (PP13-TFSI) from 1,4-butanedithiol and the concentrated filtrate from a reaction mixture of molybdenum(vi) trioxide and ethylene glycol could not be reproduced reliably, affording numerous uniquely coloured reaction mixtures that precipitated a variety of crystalline molybdenum coordination complexes. Further attempts to use the same two of these filtrates to electrodeposit molybdenum(iv) disulfide from 0.1 M PP13-TFSI in tetrahydrofuran with 1,4-butanedithiol at room temperature were unsuccessful. Various crude reaction mixtures grew crystals of different identity from eight attempts to synthesize the reported molybdenum-precursor. Single crystal X-ray diffraction (SC-XRD) offered insight into a wide range of structural features from four candidate paramagnetic precursor compounds, including a novel organomolybdenum cluster. Electrochemical studies of the various molybdenum-precursor filtrates, ethylene glycol, and 1,4-butanedithiol were conducted in 0.1 M PP13-TFSI in tetrahydrofuran, offering insight into differences between preparations of the molybdenum-precursor and interference between ethylene glycol and 1,4-butanedithiol on platinum working electrodes. Molybdenum(iv) disulfide electrodeposition attempts included cyclic voltammetry and chronoamperometry on platinum and glassy carbon working electrodes, which led to either no deposited material, or molybdenum, carbon, oxygen, and sulfur containing amorphous and non-homogenous deposits, as indicated by SEM-EDS analysis.

An Improved Synthesis of PN-adamantanoid Cages P4 (NR)6 and a Mechanistic Study of their Fourfold Oxidation.

Phosphorus-nitrogen (PN) adamantanoid cages are valuable precursors for materials chemistry, but their syntheses are based on harsh methods that sometimes require access to restricted reagents. We report a new and scalable synthesis of PN adamantanoid compounds by chlorosilane elimination between bis-silylated amines and phosphorus trichloride. We further study the mechanism of the recently-reported four-fold oxidation of such cages with Me3 SiN3 to yield tetravalent tetrahedral connectors for materials chemistry. Reaction monitoring and kinetic modelling revealed the key rate-limiting step, but attempts to accelerate this using Lewis acid additives were unsuccessful. Nevertheless, a new four-fold oxidized PN-adamantanoid cage has been prepared and structurally characterized.

Planar bismuth triamides: a tunable platform for main group Lewis acidity and polymerization catalysis.

Geometric deformation in main group compounds can be used to elicit unique properties including strong Lewis acidity. Here we report on a family of planar bismuth(iii) complexes (cf. typically pyramidal structure for such compounds), which show a geometric Lewis acidity that can be further tuned by varying the steric and electronic features of the triamide ligand employed. The structural dynamism of the planar bismuth complexes was probed in both the solid and solution phase, revealing at least three distinct modes of intermolecular association. A modified Gutmann-Beckett method was used to assess their electrophilicity by employing trimethylphosphine sulfide in addition to triethylphosphine oxide as probes, providing insights into the preference for binding hard or soft substrates. Experimental binding studies were complemented by a computational assessment of the affinities and dissection of the latter into their intrinsic bond strength and deformation energy components. The results show comparable Lewis acidity to triarylboranes, with the added ability to bind two bases simultaneously, and reduced discrimination against soft substrates. We also study the catalytic efficacy of these complexes in the ring opening polymerization of cyclic esters ε-caprolactone and rac-lactide. The polymers obtained show excellent dispersity values and high molecular weights with low catalyst loadings used. The complexes retain their performance under industrially relevant conditions, suggesting they may be useful as less toxic alternatives to tin catalysts in the production of medical grade materials. Collectively, these results establish planar bismuth complexes as not only a novel neutral platform for main group Lewis acidity, but also a potentially valuable one for catalysis.

Synthesis and crystal structures of halogenated oxathiazolones and an unexpected propanamide.

The known 1,3,4-oxathiazol-2-ones with crystal structures reported in the Cambridge Structural Database are limited (13 to date) and this article expands the library to 15. In addition, convenient starting materials for the future exploration of 1,3,4-oxathiazol-2-ones are detailed. An unexpected halogenated propanamide has also been identified as a by-product of one reaction, presumably reacting with HCl generated in situ. The space group of 5-[(E)-2-chloroethenyl]-1,3,4-oxathiazol-2-one, C4H2ClNO2S, (1), is P21, with a high Z' value of 6; the space group of rac-2,3-dibromo-3-chloropropanamide, C3H4Br2ClNO, (2), is P21, with Z' = 4; and the structure of rac-5-(1,2-dibromo-2-phenylethyl)-1,3,4-oxathiazol-2-one, C10H7Br2NO2S, (3), crystallizes in the space group Pca21, with Z' = 1. Both of the structures of compounds 2 and 3 are modeled with two-component disorder and each molecular site hosts both of the enantiomers of the racemic pairs (S,S)/(R,R) and (R,S)/(S,R), respectively.

Synthesis and crystal structure of 3-phenyl-1,4,2-di-thia-zole-5-thione.

In the title compound, C8H5NS3, the dihedral angle between the heterocyclic ring and the phenyl ring is 2.62 (5)°. In the extended structure, aromatic π-π stacking between the 1,4,2-di-thia-zole-5-thione moiety and the phenyl ring is observed [centroid-centroid distances = 3.717 (6) and 3.712 (6) Å]. The almost planar mol-ecules arrange themselves in parallel chains of head-to-tail mol-ecules oriented by a network of weak C-H⋯S contacts close to the sum of their van der Waals radii within the chains. All the hydrogen atoms participate in hydrogen-bonding inter-actions with the sulfur and nitro-gen atoms of adjacent mol-ecules. C=S⋯S contacts between the chains that are significantly shorter than the sum of their van der Waals radii also impact the overall packing.

AutoTutor: a tutor with dialogue in natural language.

AutoTutor is a learning environment that tutors students by holding a conversation in natural language. AutoTutor has been developed for Newtonian qualitative physics and computer literacy. Its design was inspired by explanation-based constructivist theories of learning, intelligent tutoring systems that adaptively respond to student knowledge, and empirical research on dialogue patterns in tutorial discourse. AutoTutor presents challenging problems (formulated as questions) from a curriculum script and then engages in mixed initiative dialogue that guides the student in building an answer. It provides the student with positive, neutral, or negative feedback on the student's typed responses, pumps the student for more information, prompts the student to fill in missing words, gives hints, fills in missing information with assertions, identifies and corrects erroneous ideas, answers the student's questions, and summarizes answers. AutoTutor has produced learning gains of approximately .70 sigma for deep levels of comprehension.